From: swarren@wwwdotorg•org (Stephen Warren)
To: linux-arm-kernel@lists•infradead.org
Subject: [PATCH v3 00/10] ARM: tegra: Add PCIe device tree support
Date: Wed, 15 Aug 2012 13:04:20 -0600 [thread overview]
Message-ID: <502BF2B4.9030401@wwwdotorg.org> (raw)
In-Reply-To: <502AE485.8060307@wwwdotorg.org>
On 08/14/2012 05:51 PM, Stephen Warren wrote:
> On 08/14/2012 04:58 PM, Stephen Warren wrote:
...
>> Can't we make the call to pci_bus_add_devices() optional in
>> pci_scan_root_bus() somehow; one of:
>
> Sigh, that turns out not to work correctly; it solves at least this part
> of the problem when booting using device tree, but when booting using a
> board file, it causes the IRQ number passed to the PCIe device to be
> bogus:-(
>
> I give up for now.
I think the appropriate workaround for Tegra in 3.6 is to simply make
any drivers for PCIe-based devices be modules instead of built-in, as
Thierry hinted at much earlier in the thread. I've validated that the
Ethernet works just fine on TrimSlice with that change, booting v3.6-rc1
using either board files or device tree.
For 3.7, we should continue the discussion about a real fix; I'll look
into the change Bjorn requested and see if it works, although given that
hacking pci_scan_root_bus as described immediately previously in this
thread caused a regression when booting using a board file, and the fact
that board files are no longer supported on Tegra, I'm not too confident
in the outcome...
next prev parent reply other threads:[~2012-08-15 19:04 UTC|newest]
Thread overview: 79+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-07-26 19:55 [PATCH v3 00/10] ARM: tegra: Add PCIe device tree support Thierry Reding
2012-07-26 19:55 ` [PATCH v3 01/10] PCI: Keep pci_fixup_irqs() around after init Thierry Reding
2012-08-14 5:06 ` Bjorn Helgaas
2012-08-14 5:37 ` Thierry Reding
2012-08-15 17:06 ` Bjorn Helgaas
2012-08-15 19:28 ` Thierry Reding
2012-08-15 19:42 ` Bjorn Helgaas
2012-08-15 20:01 ` Thierry Reding
2012-09-07 16:19 ` Stephen Warren
2012-09-07 17:00 ` Thierry Reding
2012-09-07 17:22 ` Bjorn Helgaas
2012-09-14 18:55 ` Thierry Reding
2012-09-14 19:45 ` Bjorn Helgaas
2012-07-26 19:55 ` [PATCH v3 02/10] ARM: pci: Keep pci_common_init() " Thierry Reding
2012-07-26 19:55 ` [PATCH v3 03/10] ARM: pci: Allow passing per-controller private data Thierry Reding
2012-07-26 19:55 ` [PATCH v3 04/10] ARM: tegra: Move tegra_pcie_xclk_clamp() to PMC Thierry Reding
2012-07-26 19:55 ` [PATCH v3 05/10] resource: add PCI configuration space support Thierry Reding
2012-08-14 5:00 ` Bjorn Helgaas
2012-08-14 5:55 ` Thierry Reding
2012-08-14 17:38 ` Bjorn Helgaas
2012-08-14 18:01 ` Thierry Reding
2012-08-14 21:44 ` Bjorn Helgaas
2012-08-15 6:49 ` Thierry Reding
2012-08-16 15:18 ` Stephen Warren
2012-08-16 18:27 ` Thierry Reding
2012-07-26 19:55 ` [PATCH v3 06/10] ARM: tegra: Rewrite PCIe support as a driver Thierry Reding
2012-07-26 19:55 ` [PATCH v3 07/10] ARM: tegra: pcie: Add MSI support Thierry Reding
2012-07-26 19:55 ` [PATCH v3 08/10] of/address: Handle #address-cells > 2 specially Thierry Reding
2012-07-31 20:18 ` Rob Herring
2012-08-15 20:06 ` Thierry Reding
2012-09-07 16:24 ` Stephen Warren
2012-09-07 16:32 ` Rob Herring
2012-07-26 19:55 ` [PATCH v3 09/10] of: Add of_pci_parse_ranges() Thierry Reding
2012-07-31 20:07 ` Rob Herring
2012-08-01 6:54 ` Thierry Reding
2012-08-01 16:07 ` Stephen Warren
2012-07-26 19:55 ` [PATCH v3 10/10] ARM: tegra: pcie: Add device tree support Thierry Reding
2012-08-14 20:12 ` Thierry Reding
2012-08-14 23:50 ` Bjorn Helgaas
2012-08-15 6:37 ` Thierry Reding
2012-08-15 12:18 ` Bjorn Helgaas
2012-08-15 12:30 ` Thierry Reding
2012-08-15 14:36 ` Bjorn Helgaas
2012-08-15 14:57 ` Thierry Reding
2012-08-15 20:25 ` Arnd Bergmann
2012-08-15 20:48 ` Bjorn Helgaas
2012-08-16 4:55 ` Thierry Reding
2012-08-16 7:03 ` Arnd Bergmann
2012-08-16 7:47 ` Thierry Reding
2012-08-16 12:15 ` Thierry Reding
2012-07-31 16:18 ` [PATCH v3 00/10] ARM: tegra: Add PCIe " Stephen Warren
2012-08-01 6:35 ` Thierry Reding
2012-08-01 17:02 ` Stephen Warren
2012-08-02 6:15 ` Thierry Reding
2012-08-06 19:42 ` Stephen Warren
2012-08-07 18:20 ` Thierry Reding
2012-08-13 17:40 ` Thierry Reding
2012-08-13 18:47 ` Stephen Warren
2012-08-13 20:33 ` Thierry Reding
2012-08-13 21:38 ` Rob Herring
2012-08-14 6:14 ` Thierry Reding
2012-08-13 23:18 ` Bjorn Helgaas
2012-08-14 6:29 ` Thierry Reding
2012-08-14 19:39 ` Stephen Warren
2012-08-14 19:58 ` Thierry Reding
2012-08-14 21:55 ` Bjorn Helgaas
2012-08-14 22:58 ` Stephen Warren
2012-08-14 23:51 ` Stephen Warren
2012-08-15 19:04 ` Stephen Warren [this message]
2012-08-15 20:09 ` Thierry Reding
2012-08-15 20:11 ` Stephen Warren
2012-08-15 20:19 ` Thierry Reding
2012-09-07 23:34 ` Stephen Warren
2012-09-08 0:04 ` Russell King - ARM Linux
2012-09-08 5:53 ` Stephen Warren
2012-09-08 17:51 ` Bjorn Helgaas
2012-09-18 6:33 ` Thierry Reding
2012-09-18 15:56 ` Bjorn Helgaas
2012-08-15 0:08 ` Bjorn Helgaas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=502BF2B4.9030401@wwwdotorg.org \
--to=swarren@wwwdotorg$(echo .)org \
--cc=linux-arm-kernel@lists$(echo .)infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox