From: jon-hunter@ti•com (Jon Hunter)
To: linux-arm-kernel@lists•infradead.org
Subject: [PATCH 01/10] ARM: OMAP3+: Implement timer workaround for errata i103 and i767
Date: Thu, 6 Sep 2012 09:42:10 -0500 [thread overview]
Message-ID: <5048B642.2070200@ti.com> (raw)
In-Reply-To: <5048ADD0.4050804@ti.com>
On 09/06/2012 09:06 AM, Jon Hunter wrote:
>
> On 09/06/2012 12:07 AM, Vaibhav Hiremath wrote:
>>
>>
>> On 9/6/2012 12:34 AM, Jon Hunter wrote:
>>> Errata Titles:
>>> i103: Delay needed to read some GP timer, WD timer and sync timer registers
>>> after wakeup (OMAP3/4)
>>> i767: Delay needed to read some GP timer registers after wakeup (OMAP5)
>>>
>>> Description (i103/i767):
>>> If a General Purpose Timer (GPTimer) is in posted mode (TSICR [2].POSTED=1),
>>> due to internal resynchronizations, values read in TCRR, TCAR1 and TCAR2
>>> registers right after the timer interface clock (L4) goes from stopped to
>>> active may not return the expected values. The most common event leading to
>>> this situation occurs upon wake up from idle.
>>>
>>> GPTimer non-posted synchronization mode is not impacted by this limitation.
>>>
>>> Workarounds:
>>> 1). Disable posted mode
>>> 2). Use static dependency between timer clock domain and MPUSS clock domain
>>> 3). Use no-idle mode when the timer is active
>>>
>>> Workarounds #2 and #3 are not pratical from a power standpoint and so
>>> workaround #1 has been implemented. Disabling posted mode adds some CPU overhead
>>> for configuring the timers as the CPU has to wait for the write to complete.
>>> However, disabling posted mode guarantees correct operation.
>>>
>>> Please note that it is safe to use posted mode for timers if the counter (TCRR)
>>> and capture (TCARx) registers will never be read. An example of this is the
>>> clock-event system timer. This is used by the kernel to schedule events however,
>>> the timers counter is never read and capture registers are not used. Given that
>>> the kernel configures this timer often yet never reads the counter register it
>>> is safe to enable posted mode in this case. Hence, for the timer used for kernel
>>> clock-events, posted mode is enabled by overriding the errata for devices that
>>> are impacted by this defect.
>>>
>>> Although both dmtimers and watchdogs are impacted by this defect this patch only
>>> implements the workaround for the dmtimer. Currently the watchdog driver does
>>> not read the counter register and so no workaround is necessary.
>>>
>>> Confirmed with Vaibhav Hiremath that this bug also impacts AM33xx devices.
>>>
>>
>> Thanks for pinging me on this and getting it confirmed.
>>
>>> Signed-off-by: Jon Hunter <jon-hunter@ti•com>
>>> ---
>>> arch/arm/mach-omap2/timer.c | 9 +++++++
>>> arch/arm/plat-omap/dmtimer.c | 2 ++
>>> arch/arm/plat-omap/include/plat/dmtimer.h | 39 +++++++++++++++++++++++++++++
>>> 3 files changed, 50 insertions(+)
>>>
>>> diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c
>>> index 2ff6d41..5471706 100644
>>> --- a/arch/arm/mach-omap2/timer.c
>>> +++ b/arch/arm/mach-omap2/timer.c
>>> @@ -208,6 +208,13 @@ static void __init omap2_gp_clockevent_init(int gptimer_id,
>>> {
>>> int res;
>>>
>>> + /*
>>> + * For clock-event timers we never read the timer counter and
>>> + * so we are not impacted by errata i103 and i767. Therefore,
>>> + * we can safely ignore this errata for clock-event timers.
>>> + */
>>> + __omap_dm_timer_populate_errata(&clkev, OMAP_TIMER_ERRATA_I103_I767);
>>> +
>>
>> Couple of points,
>>
>> 1. It is confusing to me, as you are passing the errata flag so i expect
>> api should set it. Why can't we do reverse way, you pass 0 here, since
>> you don't want to set and pass this flag every other places where you
>> want to enable this errata.
>
> Per the design of the __omap_dm_timer_populate_errata function, the 2nd
> argument is called override to allow us to override an errata. I am not
> a huge fan of this, but I wanted to be explicit in the code that we are
> intentionally allowing posted mode for the clock-events timer.
>
> I did not wish to pass the flags we want to set because if there more
> flags added in the future then we will have to keep changing the calls
> to the populate_errata function to add these.
By the way, your proposal could work nicely if we could pass errata
flags from HWMOD. However, I am not sure if Paul or Benoit would go for
this as they want HWMOD data to be auto-generated as much as possible
and so I am not sure how that would work for errata which are not
expected by design ;-)
Cheers
Jon
next prev parent reply other threads:[~2012-09-06 14:42 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-09-05 19:04 [PATCH 00/10] ARM: OMAP: DMTIMER fixes and clean-up Jon Hunter
2012-09-05 19:04 ` [PATCH 01/10] ARM: OMAP3+: Implement timer workaround for errata i103 and i767 Jon Hunter
2012-09-06 5:07 ` Vaibhav Hiremath
2012-09-06 14:06 ` Jon Hunter
2012-09-06 14:42 ` Jon Hunter [this message]
2012-09-06 15:20 ` Jon Hunter
2012-09-13 10:26 ` Hiremath, Vaibhav
2012-09-13 10:24 ` Hiremath, Vaibhav
2012-09-05 19:04 ` [PATCH 02/10] ARM: OMAP: Fix timer posted mode support Jon Hunter
2012-09-06 12:57 ` Vaibhav Hiremath
2012-09-06 14:20 ` Jon Hunter
2012-09-06 16:01 ` Jon Hunter
2012-09-13 10:24 ` Hiremath, Vaibhav
2012-09-05 19:04 ` [PATCH 03/10] ARM: OMAP3: Correct HWMOD DMTIMER SYSC register declarations Jon Hunter
2012-09-05 19:04 ` [PATCH 04/10] ARM: OMAP2/3: Define HWMOD software reset status for DMTIMERs Jon Hunter
2012-09-05 19:04 ` [PATCH 05/10] ARM: OMAP2+: Don't use __omap_dm_timer_reset() Jon Hunter
2012-09-05 19:04 ` [PATCH 06/10] ARM: OMAP: Fix dmtimer reset for timer1 Jon Hunter
2012-09-05 19:04 ` [PATCH 07/10] ARM: OMAP: Clean-up dmtimer reset code Jon Hunter
2012-09-05 19:04 ` [PATCH 08/10] ARM: OMAP: Clean-up timer posted mode support Jon Hunter
2012-09-07 22:22 ` Tony Lindgren
2012-09-10 21:59 ` Jon Hunter
2012-09-11 0:58 ` Tony Lindgren
2012-09-11 16:26 ` Jon Hunter
2012-09-11 16:34 ` Tony Lindgren
2012-09-13 3:26 ` Jon Hunter
2012-09-05 19:04 ` [PATCH 09/10] ARM: OMAP: Add dmtimer interrupt disable function Jon Hunter
2012-09-06 12:58 ` Vaibhav Hiremath
2012-09-06 14:26 ` Jon Hunter
2012-09-05 19:04 ` [PATCH 10/10] ARM: OMAP: Remove unnecessary call to clk_get() Jon Hunter
2012-09-06 12:58 ` [PATCH 00/10] ARM: OMAP: DMTIMER fixes and clean-up Vaibhav Hiremath
2012-09-06 14:30 ` Jon Hunter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5048B642.2070200@ti.com \
--to=jon-hunter@ti$(echo .)com \
--cc=linux-arm-kernel@lists$(echo .)infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox