Subject: [PATCH 07/12] ARM: move all dtb targets out of Makefile.boot

From: [email-masked] (Rob Herring)
Date: Mon, 10 Sep 2012 12:51:44 -0500

On 09/10/2012 10:52 AM, Jean-Christophe PLAGNIOL-VILLARD wrote:
> On 15:12 Thu 06 Sep     , Rob Herring wrote:
>> From: Rob Herring <[email-masked]>
>>
>> In preparation to support multi-platform kernels, move all the dtb targets
>> out of the mach Makefile.boot and into the arch/arm/boot/dts/Makefile
>> which is closer to the sources.
>>
>> Signed-off-by: Rob Herring <[email-masked]>
>> Cc: Russell King <[email-masked]>
>> Cc: Andrew Victor <[email-masked]>
>> Cc: Nicolas Ferre <[email-masked]>
>> Cc: Jean-Christophe Plagniol-Villard <[email-masked]>
>> Cc: Kukjin Kim <[email-masked]>
>> Cc: Sascha Hauer <[email-masked]>
>> Cc: Jason Cooper <[email-masked]>
>> Cc: Andrew Lunn <[email-masked]>
>> Cc: Gregory Clement <[email-masked]>
>> Cc: Shawn Guo <[email-masked]>
>> Cc: Viresh Kumar <[email-masked]>
>> Cc: Shiraz Hashim <[email-masked]>
>> Cc: Rajeev Kumar <[email-masked]>
>> Cc: Stephen Warren <[email-masked]>
>> Cc: Srinidhi Kasagar <[email-masked]>
>> Cc: Linus Walleij <[email-masked]>
>> ---
>>  arch/arm/boot/Makefile                |    2 ++
>>  arch/arm/boot/dts/Makefile            |   41 +++++++++++++++++++++++++++++++++
>>  arch/arm/mach-at91/Makefile.boot      |   24 -------------------
>>  arch/arm/mach-exynos/Makefile.boot    |    3 ---
>>  arch/arm/mach-imx/Makefile.boot       |    7 ------
>>  arch/arm/mach-kirkwood/Makefile.boot  |   11 ---------
>>  arch/arm/mach-lpc32xx/Makefile.boot   |    2 --
>>  arch/arm/mach-mvebu/Makefile.boot     |    2 --
>>  arch/arm/mach-mxs/Makefile.boot       |    9 --------
>>  arch/arm/mach-spear13xx/Makefile.boot |    3 ---
>>  arch/arm/mach-spear3xx/Makefile.boot  |    4 ----
>>  arch/arm/mach-spear6xx/Makefile.boot  |    2 --
>>  arch/arm/mach-tegra/Makefile.boot     |    8 -------
>>  arch/arm/mach-ux500/Makefile.boot     |    2 --
>>  arch/arm/mach-vexpress/Makefile.boot  |    5 ----
>>  15 files changed, 43 insertions(+), 82 deletions(-)
>>  create mode 100644 arch/arm/boot/dts/Makefile
>>
>> diff --git a/arch/arm/boot/Makefile b/arch/arm/boot/Makefile
>> index c877087..3fdab01 100644
>> --- a/arch/arm/boot/Makefile
>> +++ b/arch/arm/boot/Makefile
>> @@ -15,6 +15,8 @@ ifneq ($(MACHINE),)
>>  include $(srctree)/$(MACHINE)/Makefile.boot
>>  endif
>>  
>> +include $(srctree)/arch/arm/boot/dts/Makefile
>> +
>>  # Note: the following conditions must always be true:
>>  #   ZRELADDR == virt_to_phys(PAGE_OFFSET + TEXT_OFFSET)
>>  #   PARAMS_PHYS must be within 4MB of ZRELADDR
>> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
>> new file mode 100644
>> index 0000000..e59586b
>> --- /dev/null
>> +++ b/arch/arm/boot/dts/Makefile
>> @@ -0,0 +1,41 @@
>> +dtb-$(CONFIG_ARCH_HIGHBANK) += highbank.dtb
> sorry I see no need of the dtb-y
> 
> just do all the time

That's not how it works today. dtb's only for all enabled platforms are
built. Changing the behavior should be a different patch.

Rob