From: voice.shen@atmel•com (Bo Shen)
To: linux-arm-kernel@lists•infradead.org
Subject: [PATCH 1/1] ARM: at91: fix missing #interrupt-cells on gpio-controller
Date: Fri, 14 Sep 2012 09:29:10 +0800 [thread overview]
Message-ID: <50528866.6060409@atmel.com> (raw)
In-Reply-To: <1347532826-32733-1-git-send-email-plagnioj@jcrosoft.com>
Hi Jean-Christophe PLAGNIOL-VILLARD,
On 9/13/2012 18:40, Jean-Christophe PLAGNIOL-VILLARD wrote:
> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft•com>
> Cc: Nicolas Ferre <nicolas.ferre@atmel•com>
> ---
> arch/arm/boot/dts/at91sam9260.dtsi | 3 +++
> arch/arm/boot/dts/at91sam9263.dtsi | 5 +++++
> arch/arm/boot/dts/at91sam9g45.dtsi | 5 +++++
> arch/arm/boot/dts/at91sam9n12.dtsi | 4 ++++
> arch/arm/boot/dts/at91sam9x5.dtsi | 4 ++++
> 5 files changed, 21 insertions(+)
>
Test this on sam9x5ek board with qt1070. It works. Thanks.
Tested-by: voice.shen at atmel.com
> diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi
> index 66389c1..7c95f76 100644
> --- a/arch/arm/boot/dts/at91sam9260.dtsi
> +++ b/arch/arm/boot/dts/at91sam9260.dtsi
> @@ -104,6 +104,7 @@
> #gpio-cells = <2>;
> gpio-controller;
> interrupt-controller;
> + #interrupt-cells = <2>;
> };
>
> pioB: gpio at fffff600 {
> @@ -113,6 +114,7 @@
> #gpio-cells = <2>;
> gpio-controller;
> interrupt-controller;
> + #interrupt-cells = <2>;
> };
>
> pioC: gpio at fffff800 {
> @@ -122,6 +124,7 @@
> #gpio-cells = <2>;
> gpio-controller;
> interrupt-controller;
> + #interrupt-cells = <2>;
> };
>
> dbgu: serial at fffff200 {
> diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi
> index b460d6c..195019b 100644
> --- a/arch/arm/boot/dts/at91sam9263.dtsi
> +++ b/arch/arm/boot/dts/at91sam9263.dtsi
> @@ -95,6 +95,7 @@
> #gpio-cells = <2>;
> gpio-controller;
> interrupt-controller;
> + #interrupt-cells = <2>;
> };
>
> pioB: gpio at fffff400 {
> @@ -104,6 +105,7 @@
> #gpio-cells = <2>;
> gpio-controller;
> interrupt-controller;
> + #interrupt-cells = <2>;
> };
>
> pioC: gpio at fffff600 {
> @@ -113,6 +115,7 @@
> #gpio-cells = <2>;
> gpio-controller;
> interrupt-controller;
> + #interrupt-cells = <2>;
> };
>
> pioD: gpio at fffff800 {
> @@ -122,6 +125,7 @@
> #gpio-cells = <2>;
> gpio-controller;
> interrupt-controller;
> + #interrupt-cells = <2>;
> };
>
> pioE: gpio at fffffa00 {
> @@ -131,6 +135,7 @@
> #gpio-cells = <2>;
> gpio-controller;
> interrupt-controller;
> + #interrupt-cells = <2>;
> };
>
> dbgu: serial at ffffee00 {
> diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi
> index bafa880..63751b1 100644
> --- a/arch/arm/boot/dts/at91sam9g45.dtsi
> +++ b/arch/arm/boot/dts/at91sam9g45.dtsi
> @@ -113,6 +113,7 @@
> #gpio-cells = <2>;
> gpio-controller;
> interrupt-controller;
> + #interrupt-cells = <2>;
> };
>
> pioB: gpio at fffff400 {
> @@ -122,6 +123,7 @@
> #gpio-cells = <2>;
> gpio-controller;
> interrupt-controller;
> + #interrupt-cells = <2>;
> };
>
> pioC: gpio at fffff600 {
> @@ -131,6 +133,7 @@
> #gpio-cells = <2>;
> gpio-controller;
> interrupt-controller;
> + #interrupt-cells = <2>;
> };
>
> pioD: gpio at fffff800 {
> @@ -140,6 +143,7 @@
> #gpio-cells = <2>;
> gpio-controller;
> interrupt-controller;
> + #interrupt-cells = <2>;
> };
>
> pioE: gpio at fffffa00 {
> @@ -149,6 +153,7 @@
> #gpio-cells = <2>;
> gpio-controller;
> interrupt-controller;
> + #interrupt-cells = <2>;
> };
>
> dbgu: serial at ffffee00 {
> diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi
> index bfac0df..ef9336a 100644
> --- a/arch/arm/boot/dts/at91sam9n12.dtsi
> +++ b/arch/arm/boot/dts/at91sam9n12.dtsi
> @@ -107,6 +107,7 @@
> #gpio-cells = <2>;
> gpio-controller;
> interrupt-controller;
> + #interrupt-cells = <2>;
> };
>
> pioB: gpio at fffff600 {
> @@ -116,6 +117,7 @@
> #gpio-cells = <2>;
> gpio-controller;
> interrupt-controller;
> + #interrupt-cells = <2>;
> };
>
> pioC: gpio at fffff800 {
> @@ -125,6 +127,7 @@
> #gpio-cells = <2>;
> gpio-controller;
> interrupt-controller;
> + #interrupt-cells = <2>;
> };
>
> pioD: gpio at fffffa00 {
> @@ -134,6 +137,7 @@
> #gpio-cells = <2>;
> gpio-controller;
> interrupt-controller;
> + #interrupt-cells = <2>;
> };
>
> dbgu: serial at fffff200 {
> diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi
> index 4a18c39..8a387a8 100644
> --- a/arch/arm/boot/dts/at91sam9x5.dtsi
> +++ b/arch/arm/boot/dts/at91sam9x5.dtsi
> @@ -115,6 +115,7 @@
> #gpio-cells = <2>;
> gpio-controller;
> interrupt-controller;
> + #interrupt-cells = <2>;
> };
>
> pioB: gpio at fffff600 {
> @@ -124,6 +125,7 @@
> #gpio-cells = <2>;
> gpio-controller;
> interrupt-controller;
> + #interrupt-cells = <2>;
> };
>
> pioC: gpio at fffff800 {
> @@ -133,6 +135,7 @@
> #gpio-cells = <2>;
> gpio-controller;
> interrupt-controller;
> + #interrupt-cells = <2>;
> };
>
> pioD: gpio at fffffa00 {
> @@ -142,6 +145,7 @@
> #gpio-cells = <2>;
> gpio-controller;
> interrupt-controller;
> + #interrupt-cells = <2>;
> };
>
> dbgu: serial at fffff200 {
>
prev parent reply other threads:[~2012-09-14 1:29 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-09-13 10:40 [PATCH 1/1] ARM: at91: fix missing #interrupt-cells on gpio-controller Jean-Christophe PLAGNIOL-VILLARD
2012-09-14 1:29 ` Bo Shen [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=50528866.6060409@atmel.com \
--to=voice.shen@atmel$(echo .)com \
--cc=linux-arm-kernel@lists$(echo .)infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox