Subject: [PATCH v2 2/2] mmc: atmel-mci: AP700x PDC is not connected to MCI

From: [email-masked] (ludovic.desroches)
Date: Wed, 19 Sep 2012 08:59:14 +0200

Hi Chris,

Le 09/19/2012 07:21 AM, Chris Ball a ?crit :
> Hi,
>
> On Thu, Aug 30 2012, Hein Tibosch wrote:
>> Earlier, atmel-mci was adapted to make use of the peripheral DMA
>> controller (PDC), in case normal DMA wouldn't work.
>> ( http://comments.gmane.org/gmane.linux.kernel.mmc/9403 )
>> This works OK on ARM platforms (AT91), but it broke the driver
>> for AVR32, the AP700x.
>> Although the MCI has PDC support, the connection is not done for
>> AVR chips
>>
>> This patch makes the use of PDC depend on CONFIG_AVR32
>>
>> Signed-off-by: Hein Tibosch <[email-masked]>
>>
>> ---
>>   drivers/mmc/host/atmel-mci-regs.h |    7 +++++++
>>   drivers/mmc/host/atmel-mci.c      |    2 +-
>>   2 files changed, 8 insertions(+), 1 deletions(-)
>>
>> diff --git a/drivers/mmc/host/atmel-mci-regs.h b/drivers/mmc/host/atmel-mci-regs.h
>> index ab56f7d..c97001e 100644
>> --- a/drivers/mmc/host/atmel-mci-regs.h
>> +++ b/drivers/mmc/host/atmel-mci-regs.h
>> @@ -140,6 +140,13 @@
>>   #define atmci_writel(port,reg,value)			\
>>   	__raw_writel((value), (port)->regs + reg)
>>
>> +/* On AVR chips the Peripheral DMA Controller is not connected to MCI. */
>> +#ifdef CONFIG_AVR32
>> +#	define ATMCI_PDC_CONNECTED	0
>> +#else
>> +#	define ATMCI_PDC_CONNECTED	1
>> +#endif
>> +
>>   /*
>>    * Fix sconfig's burst size according to atmel MCI. We need to convert them as:
>>    * 1 -> 0, 4 -> 1, 8 -> 2, 16 -> 3.
>> diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c
>> index a6a5593..b8de891 100644
>> --- a/drivers/mmc/host/atmel-mci.c
>> +++ b/drivers/mmc/host/atmel-mci.c
>> @@ -2208,7 +2208,7 @@ static void __init atmci_get_cap(struct atmel_mci *host)
>>   			"version: 0x%x\n", version);
>>
>>   	host->caps.has_dma_conf_reg = 0;
>> -	host->caps.has_pdc = 1;
>> +	host->caps.has_pdc = ATMCI_PDC_CONNECTED;
>>   	host->caps.has_cfg_reg = 0;
>>   	host->caps.has_cstor_reg = 0;
>>   	host->caps.has_highspeed = 0;
>
> Thanks, pushed to mmc-next for 3.7.
>
> I changed the commit message text to reflect my understanding of what
> the patch does better, from:
>    This patch makes the use of PDC depend on CONFIG_AVR32.
> to:
>    This patch makes the use of PDC depend on !CONFIG_AVR32.
>

You're right.

> (Ludovic, perhaps you could give an ACK for this patch?)
>

It was given for the first version but not reported in the second 
version. So yes you can add

Acked-by: Ludovic Desroches <[email-masked]>

Thanks

Ludovic

> - Chris.