From: nicolas.ferre@atmel•com (Nicolas Ferre)
To: linux-arm-kernel@lists•infradead.org
Subject: [PATCH 3/6] ARM: at91: add clocks for spi DT entries
Date: Wed, 26 Sep 2012 10:32:06 +0200 [thread overview]
Message-ID: <5062BD86.3070401@atmel.com> (raw)
In-Reply-To: <1348642261-27554-4-git-send-email-wenyou.yang@atmel.com>
On 09/26/2012 08:50 AM, Wenyou Yang :
> Signed-off-by: Wenyou Yang <wenyou.yang@atmel•com>
> ---
> arch/arm/mach-at91/at91sam9260.c | 2 ++
> arch/arm/mach-at91/at91sam9g45.c | 2 ++
> arch/arm/mach-at91/at91sam9n12.c | 2 ++
> arch/arm/mach-at91/at91sam9x5.c | 3 +++
> 4 files changed, 9 insertions(+)
>
> diff --git a/arch/arm/mach-at91/at91sam9260.c b/arch/arm/mach-at91/at91sam9260.c
> index 30c7f26..90d38a8 100644
> --- a/arch/arm/mach-at91/at91sam9260.c
> +++ b/arch/arm/mach-at91/at91sam9260.c
> @@ -227,6 +227,8 @@ static struct clk_lookup periph_clocks_lookups[] = {
> CLKDEV_CON_DEV_ID("t1_clk", "fffdc000.timer", &tc4_clk),
> CLKDEV_CON_DEV_ID("t2_clk", "fffdc000.timer", &tc5_clk),
> CLKDEV_CON_DEV_ID("hclk", "500000.ohci", &ohci_clk),
> + CLKDEV_CON_DEV_ID("spi_clk", "fffa8000.spi", &spi0_clk),
> + CLKDEV_CON_DEV_ID("spi_clk", "fffac000.spi", &spi1_clk),
> /* fake hclk clock */
> CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &ohci_clk),
> CLKDEV_CON_ID("pioA", &pioA_clk),
> diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c
> index ef6cedd..9d0ec1c 100644
> --- a/arch/arm/mach-at91/at91sam9g45.c
> +++ b/arch/arm/mach-at91/at91sam9g45.c
> @@ -254,6 +254,8 @@ static struct clk_lookup periph_clocks_lookups[] = {
> CLKDEV_CON_DEV_ID("t0_clk", "fffd4000.timer", &tcb0_clk),
> CLKDEV_CON_DEV_ID("hclk", "700000.ohci", &uhphs_clk),
> CLKDEV_CON_DEV_ID("ehci_clk", "800000.ehci", &uhphs_clk),
> + CLKDEV_CON_DEV_ID("spi_clk", "fffa4000.spi", &spi0_clk),
> + CLKDEV_CON_DEV_ID("spi_clk", "fffa8000.spi", &spi1_clk),
> /* fake hclk clock */
> CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &uhphs_clk),
> CLKDEV_CON_ID("pioA", &pioA_clk),
> diff --git a/arch/arm/mach-at91/at91sam9n12.c b/arch/arm/mach-at91/at91sam9n12.c
> index 0849466..21b264b 100644
> --- a/arch/arm/mach-at91/at91sam9n12.c
> +++ b/arch/arm/mach-at91/at91sam9n12.c
> @@ -169,6 +169,8 @@ static struct clk_lookup periph_clocks_lookups[] = {
> CLKDEV_CON_DEV_ID("t0_clk", "f8008000.timer", &tcb_clk),
> CLKDEV_CON_DEV_ID("t0_clk", "f800c000.timer", &tcb_clk),
> CLKDEV_CON_DEV_ID("dma_clk", "ffffec00.dma-controller", &dma_clk),
> + CLKDEV_CON_DEV_ID("spi_clk", "f0000000.spi", &spi0_clk),
> + CLKDEV_CON_DEV_ID("spi_clk", "f0004000.spi", &spi1_clk),
> CLKDEV_CON_ID("pioA", &pioAB_clk),
> CLKDEV_CON_ID("pioB", &pioAB_clk),
> CLKDEV_CON_ID("pioC", &pioCD_clk),
> diff --git a/arch/arm/mach-at91/at91sam9x5.c b/arch/arm/mach-at91/at91sam9x5.c
> index 477cf9d..b6f3a92 100644
> --- a/arch/arm/mach-at91/at91sam9x5.c
> +++ b/arch/arm/mach-at91/at91sam9x5.c
> @@ -16,6 +16,7 @@
> #include <mach/at91_pmc.h>
> #include <mach/cpu.h>
> #include <mach/board.h>
> +#include <mach/gpio.h>
What is the purpose of this line in this patch?
>
> #include "soc.h"
> #include "generic.h"
> @@ -231,6 +232,8 @@ static struct clk_lookup periph_clocks_lookups[] = {
> CLKDEV_CON_DEV_ID("t0_clk", "f800c000.timer", &tcb0_clk),
> CLKDEV_CON_DEV_ID("dma_clk", "ffffec00.dma-controller", &dma0_clk),
> CLKDEV_CON_DEV_ID("dma_clk", "ffffee00.dma-controller", &dma1_clk),
> + CLKDEV_CON_DEV_ID("spi_clk", "f0000000.spi", &spi0_clk),
> + CLKDEV_CON_DEV_ID("spi_clk", "f0004000.spi", &spi1_clk),
> CLKDEV_CON_ID("pioA", &pioAB_clk),
> CLKDEV_CON_ID("pioB", &pioAB_clk),
> CLKDEV_CON_ID("pioC", &pioCD_clk),
>
--
Nicolas Ferre
next prev parent reply other threads:[~2012-09-26 8:32 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-09-26 6:50 [PATCH 0/6] atmel SoC SPI controller with DT Wenyou Yang
2012-09-26 6:50 ` [PATCH 1/6] of_spi: add generic binding support to specify cs gpio Wenyou Yang
2012-09-26 6:50 ` [PATCH 2/6] spi: atmel: add dmaengine and dt support Wenyou Yang
2012-09-26 7:05 ` Uwe Kleine-König
2012-09-27 7:13 ` Richard Genoud
2012-09-27 7:39 ` Uwe Kleine-König
2012-09-27 8:08 ` Jean-Christophe PLAGNIOL-VILLARD
2012-09-27 8:15 ` Gregory CLEMENT
2012-09-26 6:50 ` [PATCH 3/6] ARM: at91: add clocks for spi DT entries Wenyou Yang
2012-09-26 8:32 ` Nicolas Ferre [this message]
2012-09-26 6:50 ` [PATCH 4/6] ARM: dts: add spi nodes for atmel SoCs Wenyou Yang
2012-09-26 6:51 ` [PATCH 5/6] ARM: dts: add spi nodes for atmel boards Wenyou Yang
2012-09-26 6:51 ` [PATCH 6/6] spi: atmel: add dt property for DMA configuration for sam9x5 and sam9n12 Wenyou Yang
2012-09-26 8:28 ` Nicolas Ferre
2012-09-26 14:15 ` [PATCH 0/6] atmel SoC SPI controller with DT Jean-Christophe PLAGNIOL-VILLARD
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5062BD86.3070401@atmel.com \
--to=nicolas.ferre@atmel$(echo .)com \
--cc=linux-arm-kernel@lists$(echo .)infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox