Subject: [PATCH] ARM: Push selects for TWD/SCU into machine entries

From: [email-masked] (Rob Herring)
Date: Thu, 04 Oct 2012 08:05:32 -0500

On 10/04/2012 03:50 AM, Stephen Boyd wrote:
> The TWD and SCU configs are selected by default as long as
> SCORPIONMP is false and/or MCT is false. Implementing the logic
> this way certainly saves lines in the Kconfig but it precludes
> those machines which select SCORPIONMP or MCT from participating
> in the single zImage effort because when those machines are
> combined with other SMP capable machines the TWD and SCU are no
> longer selected.
> 
> Push the select out to the machine entries so that we can compile
> these machines together and still select the appropriate configs.

I think this is the wrong direction as I'd like to see the platform
selects shrink. I believe the local timers are run-time enabled now, so
can't we just drop the condition and always select TWD and SCU for
multi-platform?

Or perhaps we need a CortexA9 config symbol that selects V7, GIC, TWD,
SCU, SMP, PL310, errata, etc. rather than duplicating those for every
platform.

Rob

> Signed-off-by: Stephen Boyd <[email-masked]>
> Cc: David Brown <[email-masked]>
> Cc: Kukjin Kim <[email-masked]>
> Cc: Linus Walleij <[email-masked]>
> Cc: Pawel Moll <[email-masked]>
> Cc: Rob Herring <[email-masked]>
> Cc: Russell King <[email-masked]>
> Cc: Sascha Hauer <[email-masked]>
> Cc: Shiraz Hashim <[email-masked]>
> Cc: Simon Horman <[email-masked]>
> Cc: Srinidhi Kasagar <[email-masked]>
> Cc: Stephen Warren <[email-masked]>
> Cc: Tony Lindgren <[email-masked]>
> Cc: Viresh Kumar <[email-masked]>
> ---
> 
> Does OMAP5 need to select TWD? I suspect not if it uses the
> architected timers.
> 
>  arch/arm/Kconfig               | 8 ++++++--
>  arch/arm/mach-exynos/Kconfig   | 2 ++
>  arch/arm/mach-highbank/Kconfig | 1 +
>  arch/arm/mach-imx/Kconfig      | 2 ++
>  arch/arm/mach-msm/Kconfig      | 7 ++-----
>  arch/arm/mach-omap2/Kconfig    | 4 ++++
>  arch/arm/mach-realview/Kconfig | 8 ++++++++
>  arch/arm/mach-vexpress/Kconfig | 2 ++
>  arch/arm/plat-spear/Kconfig    | 2 ++
>  9 files changed, 29 insertions(+), 7 deletions(-)
> 
> diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
> index e85f2b6..303ce90 100644
> --- a/arch/arm/Kconfig
> +++ b/arch/arm/Kconfig
> @@ -639,6 +639,8 @@ config ARCH_TEGRA
>  	select GENERIC_GPIO
>  	select HAVE_CLK
>  	select HAVE_SMP
> +	select HAVE_ARM_SCU if SMP
> +	select HAVE_ARM_TWD if LOCAL_TIMERS
>  	select MIGHT_HAVE_CACHE_L2X0
>  	select ARCH_HAS_CPUFREQ
>  	select USE_OF
> @@ -686,6 +688,8 @@ config ARCH_SHMOBILE
>  	select CLKDEV_LOOKUP
>  	select HAVE_MACH_CLKDEV
>  	select HAVE_SMP
> +	select HAVE_ARM_SCU if SMP
> +	select HAVE_ARM_TWD if LOCAL_TIMERS
>  	select GENERIC_CLOCKEVENTS
>  	select MIGHT_HAVE_CACHE_L2X0
>  	select NO_IOPORT
> @@ -882,6 +886,8 @@ config ARCH_U8500
>  	select ARCH_REQUIRE_GPIOLIB
>  	select ARCH_HAS_CPUFREQ
>  	select HAVE_SMP
> +	select HAVE_ARM_SCU if SMP
> +	select HAVE_ARM_TWD if LOCAL_TIMERS
>  	select MIGHT_HAVE_CACHE_L2X0
>  	help
>  	  Support for ST-Ericsson's Ux500 architecture
> @@ -1507,7 +1513,6 @@ config SMP
>  	depends on HAVE_SMP
>  	depends on MMU
>  	select USE_GENERIC_SMP_HELPERS
> -	select HAVE_ARM_SCU if !ARCH_MSM_SCORPIONMP
>  	help
>  	  This enables support for systems with more than one CPU. If you have
>  	  a system with only one CPU, like most personal computers, say N. If
> @@ -1620,7 +1625,6 @@ config LOCAL_TIMERS
>  	bool "Use local timer interrupts"
>  	depends on SMP
>  	default y
> -	select HAVE_ARM_TWD if (!ARCH_MSM_SCORPIONMP && !EXYNOS4_MCT)
>  	help
>  	  Enable support for local timers on SMP platforms, rather then the
>  	  legacy IPI broadcast method.  Local timers allows the system
> diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig
> index 4372075..8f97e92 100644
> --- a/arch/arm/mach-exynos/Kconfig
> +++ b/arch/arm/mach-exynos/Kconfig
> @@ -15,6 +15,7 @@ config ARCH_EXYNOS4
>  	bool "SAMSUNG EXYNOS4"
>  	default y
>  	select HAVE_SMP
> +	select HAVE_ARM_SCU if SMP
>  	select MIGHT_HAVE_CACHE_L2X0
>  	help
>  	  Samsung EXYNOS4 SoCs based systems
> @@ -22,6 +23,7 @@ config ARCH_EXYNOS4
>  config ARCH_EXYNOS5
>  	bool "SAMSUNG EXYNOS5"
>  	select HAVE_SMP
> +	select HAVE_ARM_SCU if SMP
>  	help
>  	  Samsung EXYNOS5 (Cortex-A15) SoC based systems
>  
> diff --git a/arch/arm/mach-highbank/Kconfig b/arch/arm/mach-highbank/Kconfig
> index 0e1d0a4..f1ad1f0 100644
> --- a/arch/arm/mach-highbank/Kconfig
> +++ b/arch/arm/mach-highbank/Kconfig
> @@ -11,5 +11,6 @@ config ARCH_HIGHBANK
>  	select GENERIC_CLOCKEVENTS
>  	select HAVE_ARM_SCU
>  	select HAVE_SMP
> +	select HAVE_ARM_TWD if LOCAL_TIMERS
>  	select SPARSE_IRQ
>  	select USE_OF
> diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
> index 519ed57..13f765c 100644
> --- a/arch/arm/mach-imx/Kconfig
> +++ b/arch/arm/mach-imx/Kconfig
> @@ -759,6 +759,8 @@ config SOC_IMX6Q
>  	select HAVE_IMX_MMDC
>  	select HAVE_IMX_SRC
>  	select HAVE_SMP
> +	select HAVE_ARM_SCU if SMP
> +	select HAVE_ARM_TWD if LOCAL_TIMERS
>  	select MFD_SYSCON
>  	select PINCTRL
>  	select PINCTRL_IMX6Q
> diff --git a/arch/arm/mach-msm/Kconfig b/arch/arm/mach-msm/Kconfig
> index 7902de15..5bff882 100644
> --- a/arch/arm/mach-msm/Kconfig
> +++ b/arch/arm/mach-msm/Kconfig
> @@ -44,7 +44,7 @@ endchoice
>  
>  config ARCH_MSM8X60
>  	bool "MSM8X60"
> -	select ARCH_MSM_SCORPIONMP
> +	select HAVE_SMP
>  	select ARM_GIC
>  	select CPU_V7
>  	select MSM_V2_TLMM
> @@ -55,7 +55,7 @@ config ARCH_MSM8X60
>  
>  config ARCH_MSM8960
>  	bool "MSM8960"
> -	select ARCH_MSM_SCORPIONMP
> +	select HAVE_SMP
>  	select ARM_GIC
>  	select CPU_V7
>  	select MSM_V2_TLMM
> @@ -68,9 +68,6 @@ config MSM_HAS_DEBUG_UART_HS
>  
>  config MSM_SOC_REV_A
>  	bool
> -config  ARCH_MSM_SCORPIONMP
> -	bool
> -	select HAVE_SMP
>  
>  config  ARCH_MSM_ARM11
>  	bool
> diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
> index a6219ea..b618748 100644
> --- a/arch/arm/mach-omap2/Kconfig
> +++ b/arch/arm/mach-omap2/Kconfig
> @@ -58,7 +58,9 @@ config ARCH_OMAP4
>  	select CPU_V7
>  	select ARM_GIC
>  	select HAVE_SMP
> +	select HAVE_ARM_SCU if SMP
>  	select LOCAL_TIMERS if SMP
> +	select HAVE_ARM_TWD if LOCAL_TIMERS
>  	select PL310_ERRATA_588369
>  	select PL310_ERRATA_727915
>  	select ARM_ERRATA_720789
> @@ -75,6 +77,8 @@ config SOC_OMAP5
>  	select CPU_V7
>  	select ARM_GIC
>  	select HAVE_SMP
> +	select HAVE_ARM_SCU if SMP
> +	select HAVE_ARM_TWD if LOCAL_TIMERS
>  	select ARM_CPU_SUSPEND if PM
>  	select SOC_HAS_REALTIME_COUNTER
>  	select ARM_ARCH_TIMER
> diff --git a/arch/arm/mach-realview/Kconfig b/arch/arm/mach-realview/Kconfig
> index c593be4..0c019b7 100644
> --- a/arch/arm/mach-realview/Kconfig
> +++ b/arch/arm/mach-realview/Kconfig
> @@ -13,6 +13,8 @@ config REALVIEW_EB_A9MP
>  	depends on MACH_REALVIEW_EB
>  	select CPU_V7
>  	select HAVE_SMP
> +	select HAVE_ARM_SCU if SMP
> +	select HAVE_ARM_TWD if LOCAL_TIMERS
>  	select MIGHT_HAVE_CACHE_L2X0
>  	help
>  	  Enable support for the Cortex-A9MPCore tile fitted to the
> @@ -24,6 +26,8 @@ config REALVIEW_EB_ARM11MP
>  	select CPU_V6K
>  	select ARCH_HAS_BARRIERS if SMP
>  	select HAVE_SMP
> +	select HAVE_ARM_SCU if SMP
> +	select HAVE_ARM_TWD if LOCAL_TIMERS
>  	select MIGHT_HAVE_CACHE_L2X0
>  	help
>  	  Enable support for the ARM11MPCore tile fitted to the Realview(R)
> @@ -44,6 +48,8 @@ config MACH_REALVIEW_PB11MP
>  	select ARM_GIC
>  	select HAVE_PATA_PLATFORM
>  	select HAVE_SMP
> +	select HAVE_ARM_SCU if SMP
> +	select HAVE_ARM_TWD if LOCAL_TIMERS
>  	select MIGHT_HAVE_CACHE_L2X0
>  	select ARCH_HAS_BARRIERS if SMP
>  	help
> @@ -86,6 +92,8 @@ config MACH_REALVIEW_PBX
>  	select ARM_GIC
>  	select HAVE_PATA_PLATFORM
>  	select HAVE_SMP
> +	select HAVE_ARM_SCU if SMP
> +	select HAVE_ARM_TWD if LOCAL_TIMERS
>  	select MIGHT_HAVE_CACHE_L2X0
>  	select ARCH_SPARSEMEM_ENABLE if CPU_V7 && !REALVIEW_HIGH_PHYS_OFFSET
>  	select ZONE_DMA if SPARSEMEM
> diff --git a/arch/arm/mach-vexpress/Kconfig b/arch/arm/mach-vexpress/Kconfig
> index c952960..4f8e0db 100644
> --- a/arch/arm/mach-vexpress/Kconfig
> +++ b/arch/arm/mach-vexpress/Kconfig
> @@ -11,6 +11,8 @@ config ARCH_VEXPRESS
>  	select HAVE_CLK
>  	select HAVE_PATA_PLATFORM
>  	select HAVE_SMP
> +	select HAVE_ARM_SCU if SMP
> +	select HAVE_ARM_TWD if LOCAL_TIMERS
>  	select ICST
>  	select MIGHT_HAVE_CACHE_L2X0
>  	select NO_IOPORT
> diff --git a/arch/arm/plat-spear/Kconfig b/arch/arm/plat-spear/Kconfig
> index 4404f82..a090ea3 100644
> --- a/arch/arm/plat-spear/Kconfig
> +++ b/arch/arm/plat-spear/Kconfig
> @@ -14,6 +14,8 @@ config ARCH_SPEAR13XX
>  	select CPU_V7
>  	select USE_OF
>  	select HAVE_SMP
> +	select HAVE_ARM_SCU if SMP
> +	select HAVE_ARM_TWD if LOCAL_TIMERS
>  	select MIGHT_HAVE_CACHE_L2X0
>  	select PINCTRL
>  	help
>