From: ludovic.desroches@atmel•com (ludovic.desroches)
To: linux-arm-kernel@lists•infradead.org
Subject: [PATCH 4/8] ARM: at91: fix external interrupt specification in board code
Date: Wed, 24 Oct 2012 17:58:42 +0200 [thread overview]
Message-ID: <50881032.3030900@atmel.com> (raw)
In-Reply-To: <ecf01c6afd3969c9af1839ccbe64cdf5357d0433.1351092432.git.nicolas.ferre@atmel.com>
Le 10/24/2012 05:33 PM, Nicolas Ferre a ?crit :
> Since the switch to sparse irq, we have to add the NR_IRQS_LEGACY
> offset to static irq numbers. It has been forgotten on these
> SPI irq definitions in board code.
>
> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel•com>
Acked-By: Ludovic Desroches <ludovic.desroches@atmel•com>
> Cc: stable <stable@vger•kernel.org> [v3.6]
> ---
> arch/arm/mach-at91/board-neocore926.c | 2 +-
> arch/arm/mach-at91/board-sam9261ek.c | 2 +-
> arch/arm/mach-at91/board-sam9263ek.c | 2 +-
> 3 files changed, 3 insertions(+), 3 deletions(-)
>
> diff --git a/arch/arm/mach-at91/board-neocore926.c b/arch/arm/mach-at91/board-neocore926.c
> index 9cda3fd..6960778 100644
> --- a/arch/arm/mach-at91/board-neocore926.c
> +++ b/arch/arm/mach-at91/board-neocore926.c
> @@ -129,7 +129,7 @@ static struct spi_board_info neocore926_spi_devices[] = {
> .max_speed_hz = 125000 * 16,
> .bus_num = 0,
> .platform_data = &ads_info,
> - .irq = AT91SAM9263_ID_IRQ1,
> + .irq = NR_IRQS_LEGACY + AT91SAM9263_ID_IRQ1,
> },
> #endif
> };
> diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c
> index 27b3af1..a9167dd 100644
> --- a/arch/arm/mach-at91/board-sam9261ek.c
> +++ b/arch/arm/mach-at91/board-sam9261ek.c
> @@ -309,7 +309,7 @@ static struct spi_board_info ek_spi_devices[] = {
> .max_speed_hz = 125000 * 26, /* (max sample rate @ 3V) * (cmd + data + overhead) */
> .bus_num = 0,
> .platform_data = &ads_info,
> - .irq = AT91SAM9261_ID_IRQ0,
> + .irq = NR_IRQS_LEGACY + AT91SAM9261_ID_IRQ0,
> .controller_data = (void *) AT91_PIN_PA28, /* CS pin */
> },
> #endif
> diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c
> index 073e174..b87dbe2 100644
> --- a/arch/arm/mach-at91/board-sam9263ek.c
> +++ b/arch/arm/mach-at91/board-sam9263ek.c
> @@ -132,7 +132,7 @@ static struct spi_board_info ek_spi_devices[] = {
> .max_speed_hz = 125000 * 26, /* (max sample rate @ 3V) * (cmd + data + overhead) */
> .bus_num = 0,
> .platform_data = &ads_info,
> - .irq = AT91SAM9263_ID_IRQ1,
> + .irq = NR_IRQS_LEGACY + AT91SAM9263_ID_IRQ1,
> },
> #endif
> };
>
next prev parent reply other threads:[~2012-10-24 15:58 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-10-24 15:33 [PATCH 0/8] at91: 3.7 fixes patch series Nicolas Ferre
2012-10-24 15:33 ` [PATCH 1/8] ARM: at91/tc: fix typo in the DT document Nicolas Ferre
2012-10-24 15:33 ` [PATCH 2/8] ARM: at91: at91sam9g10: fix SOC type detection Nicolas Ferre
2012-10-24 15:33 ` [PATCH 3/8] ARM: at91: fix external interrupts in non-DT case Nicolas Ferre
2012-10-24 15:58 ` ludovic.desroches
2012-10-24 15:33 ` [PATCH 4/8] ARM: at91: fix external interrupt specification in board code Nicolas Ferre
2012-10-24 15:58 ` ludovic.desroches [this message]
2012-10-24 15:33 ` [PATCH 5/8] ARM: at91/dts: at91sam9g20ek_common: Fix typos in buttons labels Nicolas Ferre
2012-10-24 15:33 ` [PATCH 6/8] ARM: at91/i2c: change id to let i2c-gpio work Nicolas Ferre
2012-10-24 15:59 ` ludovic.desroches
2012-10-24 15:33 ` [PATCH 7/8] ARM: at91/i2c: change id to let i2c-at91 work Nicolas Ferre
2012-10-24 15:59 ` ludovic.desroches
2012-10-24 15:33 ` [PATCH 8/8] ARM: at91: drop duplicated config SOC_AT91SAM9 entry Nicolas Ferre
2012-10-24 15:44 ` [PATCH 0/8] at91: 3.7 fixes patch series Jean-Christophe PLAGNIOL-VILLARD
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=50881032.3030900@atmel.com \
--to=ludovic.desroches@atmel$(echo .)com \
--cc=linux-arm-kernel@lists$(echo .)infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox