Subject: [PATCH 2/2] ARM: S3C64XX: Statically define parent clock of the "camera" clock

From: [email-masked] (Sylwester Nawrocki)
Date: Fri, 09 Nov 2012 09:30:49 +0100

On 11/09/2012 08:42 AM, Andrey Gusakov wrote:
> Hi.
>
> I think .reg_src can be removed? This clock have only one source.

Yes, good point. I'll repost with reg_src removed.
Can you test that patch then ?

Thanks,
Sylwester

> On Thu, Nov 8, 2012 at 2:00 AM, Sylwester Nawrocki
> <[email-masked]>  wrote:
>> The "camera" clock defined in arch/arm/mach-s3c64xx/clock.c has null
>> clock source mux control register as it can have only one parent
>> clock. In such cases there is a need to configure the parent clock
>> statically, otherwise s3c_set_clksrc() bails out with an error message
>> "no parent clock specified" leaving the parent clock not configured.
>> Define statically the parent clock so it is possible to get or set rate
>> of the "camera" clock.
>>
>> Reported-by: In-Bae Jeong<[email-masked]>
>> Signed-off-by: Sylwester Nawrocki<[email-masked]>
>> ---
>>   arch/arm/mach-s3c64xx/clock.c |    1 +
>>   1 files changed, 1 insertions(+), 0 deletions(-)
>>
>> diff --git a/arch/arm/mach-s3c64xx/clock.c b/arch/arm/mach-s3c64xx/clock.c
>> index 28041e8..85b9cf1 100644
>> --- a/arch/arm/mach-s3c64xx/clock.c
>> +++ b/arch/arm/mach-s3c64xx/clock.c
>> @@ -744,6 +744,7 @@ static struct clksrc_clk clksrcs[] = {
>>                          .name           = "camera",
>>                          .ctrlbit        = S3C_CLKCON_SCLK_CAM,
>>                          .enable         = s3c64xx_sclk_ctrl,
>> +                       .parent         =&clk_h2,
>>                  },
>>                  .reg_div        = { .reg = S3C_CLK_DIV0, .shift = 20, .size = 4  },
>>                  .reg_src        = { .reg = NULL, .shift = 0, .size = 0  },
>> --
>> 1.7.4.1