Subject: [PATCH] ARM: S3C64XX: Statically define parent clock of the "camera" clock

From: [email-masked] (Sylwester Nawrocki)
Date: Fri, 09 Nov 2012 11:18:03 +0100

On 11/09/2012 11:05 AM, Sylwester Nawrocki wrote:
> Hi,
>
> On 11/09/2012 10:31 AM, Andrey Gusakov wrote:
>> On Fri, Nov 9, 2012 at 12:32 PM, Sylwester Nawrocki
>> <[email-masked]> wrote:
>>> The "camera" clock defined in arch/arm/mach-s3c64xx/clock.c has null
>>> clock source mux control register as it can have only one parent
>>> clock. In such cases there is a need to configure the parent clock
>>> statically, otherwise s3c_set_clksrc() bails out with an error message
>>> "no parent clock specified" leaving the parent clock not configured.
>>> Define statically the parent clock so it is possible to get or set
>>> rate of the "camera" clock.
>>> While at it remove the unneded null reg_src definition.
>>>
>>> Reported-by: In-Bae Jeong<[email-masked]>
>>> Signed-off-by: Sylwester Nawrocki<[email-masked]>
>>> ---
>>> arch/arm/mach-s3c64xx/clock.c | 2 +-
>>> 1 files changed, 1 insertions(+), 1 deletions(-)
>>>
>>> diff --git a/arch/arm/mach-s3c64xx/clock.c
>>> b/arch/arm/mach-s3c64xx/clock.c
>>> index 28041e8..2e6d7f9 100644
>>> --- a/arch/arm/mach-s3c64xx/clock.c
>>> +++ b/arch/arm/mach-s3c64xx/clock.c
>>> @@ -744,9 +744,9 @@ static struct clksrc_clk clksrcs[] = {
>>> .name = "camera",
>>> .ctrlbit = S3C_CLKCON_SCLK_CAM,
>>> .enable = s3c64xx_sclk_ctrl,
>>> + .parent =&clk_h2,
>>> },
>>> .reg_div = { .reg = S3C_CLK_DIV0, .shift = 20, .size = 4 },
>>> - .reg_src = { .reg = NULL, .shift = 0, .size = 0 },
>>> .sources =&clkset_camif,
>> Just figure out that .sources can be removed to. And seems
>> "clkset_camif" and "clkset_camif_list" can be removed as unused.
>
> OK, you're right. I think it could be done as a separate patch,
> depending on this one to avoid conflicts.

Or feel free to make a new patch, ignoring this one.

--
Regards,
Sylwester