Subject: [PATCH V2 4/5] arm: mm: Added support for PJ4B cpu and init routines

From: [email-masked] (Gregory CLEMENT)
Date: Tue, 13 Nov 2012 16:15:16 +0100

Russell,

Do you have any comments on this patch?
Else do you agree to give your acked-by?

Thanks,

Gregory

On 10/29/2012 10:11 PM, Gregory CLEMENT wrote:
> From: Yehuda Yitschak <[email-masked]>
> 
> Signed-off-by: Yehuda Yitschak <[email-masked]>
> Signed-off-by: Gregory CLEMENT <[email-masked]>
> ---
>  arch/arm/mach-mvebu/Kconfig |    2 +-
>  arch/arm/mm/Kconfig         |    4 ++++
>  arch/arm/mm/proc-v7.S       |   43 +++++++++++++++++++++++++++++++++++++++++++
>  3 files changed, 48 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig
> index 17d246b..9bfaa0c 100644
> --- a/arch/arm/mach-mvebu/Kconfig
> +++ b/arch/arm/mach-mvebu/Kconfig
> @@ -22,7 +22,7 @@ config MVEBU_CLK_CPU
>  config MACH_ARMADA_370_XP
>  	bool
>  	select ARMADA_370_XP_TIMER
> -	select CPU_V7
> +	select CPU_PJ4B
>  
>  config MACH_ARMADA_370
>  	bool "Marvell Armada 370 boards"
> diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
> index 94186b6..3fd629d 100644
> --- a/arch/arm/mm/Kconfig
> +++ b/arch/arm/mm/Kconfig
> @@ -352,6 +352,10 @@ config CPU_PJ4
>  	select ARM_THUMBEE
>  	select CPU_V7
>  
> +config CPU_PJ4B
> +	bool
> +	select CPU_V7
> +
>  # ARMv6
>  config CPU_V6
>  	bool "Support ARM V6 processor" if ARCH_INTEGRATOR || MACH_REALVIEW_EB || MACH_REALVIEW_PBX
> diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S
> index 846d279..1a373c2 100644
> --- a/arch/arm/mm/proc-v7.S
> +++ b/arch/arm/mm/proc-v7.S
> @@ -169,6 +169,39 @@ __v7_ca15mp_setup:
>  	orreq	r0, r0, r10			@ Enable CPU-specific SMP bits
>  	mcreq	p15, 0, r0, c1, c0, 1
>  #endif
> +
> +__v7_pj4b_setup:
> +#ifdef CONFIG_CPU_PJ4B
> +	/* Auxiliary Debug Modes Control 1 Register */
> +	mrc	p15, 1,	r0, c15, c1, 1
> +	orr	r0, r0, #(1 << 16)     @ Disable data transfer for clean line.
> +	orr	r0, r0, #(1 << 5)      @ Enable the back off of STREX instr
> +	orr	r0, r0, #(1 << 8)      @ Disable Internal Parity Handling
> +	bic	r0, r0, #(1 << 2)      @ Disable Static BP
> +	mcr	p15, 1,	r0, c15, c1, 1
> +
> +	/* Auxiliary Debug Modes Control 2 Register */
> +	mrc	p15, 1,	r0, c15, c1, 2
> +	bic	r0, r0, #(1 << 23)   @ Enable fast LDR.
> +	orr	r0, r0, #(1 << 25)   @ Dont interleave write and snoop data.
> +	orr	r0, r0, #(1 << 27)   @ Disable Critical Word First feature.
> +	orr	r0, r0, #(1 << 29)   @ Disable outstanding non cacheable request
> +	orr	r0, r0, #(1 << 30)   @ L1 replacement - Strict round robin
> +	mcr	p15, 1,	r0, c15, c1, 2
> +
> +	/* Auxiliary Functional Modes Control Register 0 */
> +	mrc	p15, 1,	r0, c15, c2, 0
> +	orr	r0, r0, #(1 << 2)     @ Support L1 parity checking
> +	orr	r0, r0, #(1 << 8)     @ Broadcast Cache and TLB maintenance
> +	mcr	p15, 1,	r0, c15, c2, 0
> +
> +	/* Auxiliary Debug Modes Control 0 Register */
> +	mrc	p15, 1,	r0, c15, c1, 0
> +	orr	r0, r0, #(1 << 22)   @ WFI/WFE - serve the DVM and back to idle
> +	mcr	p15, 1,	r0, c15, c1, 0
> +
> +#endif /* CONFIG_CPU_PJ4B */
> +
>  __v7_setup:
>  	adr	r12, __v7_setup_stack		@ the local stack
>  	stmia	r12, {r0-r5, r7, r9, r11, lr}
> @@ -342,6 +375,16 @@ __v7_ca9mp_proc_info:
>  	.long	0xff0ffff0
>  	__v7_proc __v7_ca9mp_setup
>  	.size	__v7_ca9mp_proc_info, . - __v7_ca9mp_proc_info
> +
> +	/*
> +	 * Marvell PJ4B processor.
> +	 */
> +	.type   __v7_pj4b_proc_info, #object
> +__v7_pj4b_proc_info:
> +	.long	0x562f5842
> +	.long	0xffffffff
> +	__v7_proc __v7_pj4b_setup
> +	.size	__v7_pj4b_proc_info, . - __v7_pj4b_proc_info
>  #endif	/* CONFIG_ARM_LPAE */
>  
>  	/*
> 

-- 
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com