Subject: [PATCH 1/5] ARM: tegra20: cpuidle: add powered-down state for secondary CPU

From: [email-masked] (Stephen Warren)
Date: Mon, 03 Dec 2012 11:31:58 -0700

On 12/02/2012 08:00 PM, Joseph Lo wrote:
> The powered-down state of Tegra20 requires power gating both CPU cores.
> When the secondary CPU requests to enter powered-down state, it saves
> its own contexts and then enters WFI. The Tegra20 had a limition to
> power down both CPU cores. The secondary CPU must waits for CPU0 in
> powered-down state too. If the secondary CPU be woken up before CPU0
> entering powered-down state, then it needs to restore its CPU states
> and waits for next chance.
> 
> Be aware of that, you may see the legacy power state "LP2" in the code
> which is exactly the same meaning of "CPU power down".

> diff --git a/arch/arm/mach-tegra/sleep-tegra20.S b/arch/arm/mach-tegra/sleep-tegra20.S

> +/*
> + * tegra_pen_lock
> + *
> + * spinlock implementation with no atomic test-and-set and no coherence
> + * using Peterson's algorithm on strongly-ordered registers
> + * used to synchronize a cpu waking up from wfi with entering lp2 on idle
> + *
> + * SCRATCH37 = r1 = !turn (inverted from Peterson's algorithm)

A link to a description of that algorithm would be useful.

> + * on cpu 0:
> + * SCRATCH38 = r2 = flag[0]
> + * SCRATCH39 = r3 = flag[1]
> + * on cpu1:
> + * SCRATCH39 = r2 = flag[1]
> + * SCRATCH38 = r3 = flag[0]

That implies that r2/r3 are used for different purposes on the 2 CPUs,
and/or shadow the values of different registers. However, I see nothing
in the code which is conditional on cpu ID.