Subject: [PATCH 5/5] ARM: dts: OMAP5: Specify nonsecure PPI IRQ for arch timer

From: [email-masked] (Santosh Shilimkar)
Date: Fri, 18 Jan 2013 22:30:20 +0530

On Friday 18 January 2013 09:32 PM, Marc Zyngier wrote:
> On 18/01/13 15:32, Santosh Shilimkar wrote:
>> From: Rajendra Nayak <[email-masked]>
>>
>> Specify both secure as well as nonsecure PPI IRQ for arch
>> timer. This fixes the following errors seen on DT OMAP5 boot..
>>
>> [    0.000000] arch_timer: No interrupt available, giving up
>>
>> Cc: Benoit Cousson <[email-masked]>
>>
>> Signed-off-by: Rajendra Nayak <[email-masked]>
>> Signed-off-by: Santosh Shilimkar <[email-masked]>
>> ---
>>   arch/arm/boot/dts/omap5.dtsi |   16 ++++++++++++----
>>   1 file changed, 12 insertions(+), 4 deletions(-)
>>
>> diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
>> index 790bb2a..7a78d1b 100644
>> --- a/arch/arm/boot/dts/omap5.dtsi
>> +++ b/arch/arm/boot/dts/omap5.dtsi
>> @@ -35,8 +35,12 @@
>>   			compatible = "arm,cortex-a15";
>>   			timer {
>>   				compatible = "arm,armv7-timer";
>> -				/* 14th PPI IRQ, active low level-sensitive */
>> -				interrupts = <1 14 0x308>;
>> +				/*
>> +				 * PPI secure/nonsecure IRQ,
>> +				 * active low level-sensitive
>> +				 */
>> +				interrupts = <1 13 0x308>,
>> +					     <1 14 0x308>;
>
> Care to add the virtual and HYP timer interrupts? So KVM can get a
> chance to run on this HW...
>
Thanks Marc for spotting it. Will take care of it.

Regards
Santosh