From: florian@openwrt•org (Florian Fainelli)
To: linux-arm-kernel@lists•infradead.org
Subject: [PATCH] net: fec: Add support for multiple phys on mdiobus
Date: Mon, 21 Jan 2013 12:12:52 +0100 [thread overview]
Message-ID: <50FD22B4.5070307@openwrt.org> (raw)
In-Reply-To: <50FD2172.2020608@grandegger.com>
On 01/21/2013 12:07 PM, Wolfgang Grandegger wrote:
> On 01/21/2013 11:07 AM, Sascha Hauer wrote:
>> On Mon, Jan 21, 2013 at 09:56:24AM +0100, Wolfgang Grandegger wrote:
>>> On 01/21/2013 09:37 AM, Sascha Hauer wrote:
>>>> There may be multiple phys on an mdio bus. This series adds support
>>>> for this to the fec driver. I recently had a board which has a switch
>>>> connected to the fec's mdio bus, so I had to pick the correct phy.
>>>
>>> Pick one PHY from a switch port? Well, does a PHY-less (or fixed-link)
>>> configuration for a switch not make more sense?
>>
>> Yes, you're probably right.
>>
>>> Various ARM Ethernet
>>> contoller drivers do not support it. I recently needed a hack for an
>>> AT91 board.
>>
>> I wonder how we want to proceed. Should there be a devicetree property
>> 'fixed-link' like done for fs_enet (and not recommended for new code,
>> stated in the comment above of_phy_connect_fixed_link)?
>
> Also the gianfar and ucc_geth drivers use this interface (via fixed
> link phy). I tried to use it for the AT91 macb driver but stopped
> quickly because the usage was not straight forward (too much code)...
> even if the idea of using a fake fixed-link phy is not bad.
>
>> Currently I have a property 'phy' in the fec binding which has a phandle
>> to a phy provided by the fec's mdio bus, but this could equally well
>
> But than the cable must be connected to the associated switch port.
>
>> point to a fixed dummy phy:
>>
>> phy = &fixed-phy;
>
> The link speed, full/half duplex and maybe some mroe parameter should
> be configurable via device tree.
>
>> Currently there seems to be no common convention for the devicetree how
>> to handle such situations, or am I missing something?
>
> That's also may impression. There seem to be a few more related hacks:
>
> $ find . -name '*.c'| xargs grep -i "phy-less"
> ./ethernet/amd/au1000_eth.c: netdev_info(dev, "using PHY-less setup\n");
> ./ethernet/amd/au1000_eth.c: } else { /* PHY-less op, assume full-duplex */
> ./ethernet/ibm/emac/core.c: /* PHY-less configuration.
> ./ethernet/ibm/emac/core.c: /* PHY-less configuration.
>
> I would prefer to handle the "fixed-link" property of the ethernet dt
> node directly in the driver with a generic helper function.
Is not what of_phy_connect_fixed_link() offer? I am not sure there can
be much done by an helper than that.
--
Florian
next prev parent reply other threads:[~2013-01-21 11:12 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-01-21 8:37 [PATCH] net: fec: Add support for multiple phys on mdiobus Sascha Hauer
2013-01-21 8:37 ` [PATCH 1/2] net: fec: refactor dt probing Sascha Hauer
2013-01-21 17:48 ` Baruch Siach
2013-01-21 18:27 ` Sascha Hauer
2013-01-21 8:37 ` [PATCH 2/2] net: fec: Add support for phys from devicetree Sascha Hauer
2013-01-21 8:56 ` [PATCH] net: fec: Add support for multiple phys on mdiobus Wolfgang Grandegger
2013-01-21 10:07 ` Sascha Hauer
2013-01-21 11:07 ` Wolfgang Grandegger
2013-01-21 11:12 ` Florian Fainelli [this message]
2013-01-21 11:33 ` Wolfgang Grandegger
2013-01-21 11:56 ` Sascha Hauer
2013-01-21 12:06 ` Sascha Hauer
2013-01-22 7:22 ` Wolfgang Grandegger
2013-01-22 14:47 ` Florian Fainelli
2013-01-22 15:03 ` Wolfgang Grandegger
2013-01-22 15:19 ` Florian Fainelli
2013-01-22 15:26 ` Wolfgang Grandegger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=50FD22B4.5070307@openwrt.org \
--to=florian@openwrt$(echo .)org \
--cc=linux-arm-kernel@lists$(echo .)infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox