Subject: [PATCH v3 0/3] Platform support for EHRPWM & ECAP devices in DAVINCI.

From: [email-masked] (Sekhar Nori)
Date: Mon, 25 Mar 2013 13:44:37 +0530

On 3/25/2013 1:19 PM, Philip Avinash wrote:
> Add platform support for EHRPWM and ECAP by providing clock nodes and
> device tree nodes.
> This series depends on [1] and [2] and is available for testing at [3].
> Tested for back light support in da850 EVM with EHRPWM PWM device.
> 
> [1] http://gitorious.org/linux-davinci/linux-davinci/trees/davinci-for-v3.9/dt-2
> [2] https://gitorious.org/linux-pwm/linux-pwm/trees/for-next
> [3] https://github.com/avinashphilip/am335x_linux/tree/davinci-for-v3.9_soc_pwm
> 
> Note:
> DT support for EHRPWM backlight has not been added in da850-evm.dts as there is
> conflicting pin-mux requirement with SPI flash.
> 
> Philip Avinash (3):
>   ARM: davinci: clk framework support for enable/disable functionality

Patch 1/3 did not reach me. I cant find it in archives either so most
likely no one received it. Can you please send that one patch again?

>   arm: davinci: clock node support for ECAP & EHRPWM

For future, please be consistent and capitalize 'ARM' in subject line.

>   ARM: davinci: da850: add EHRPWM & ECAP DT node
> 
>  arch/arm/boot/dts/da850.dtsi               |   30 ++++++++++++++++++
>  arch/arm/mach-davinci/clock.c              |   21 ++++++++-----
>  arch/arm/mach-davinci/clock.h              |    2 ++
>  arch/arm/mach-davinci/da850.c              |   46 ++++++++++++++++++++++++++++
>  arch/arm/mach-davinci/da8xx-dt.c           |    5 +++
>  arch/arm/mach-davinci/include/mach/da8xx.h |    1 +
>  6 files changed, 98 insertions(+), 7 deletions(-)
> 

Thanks,
Sekhar