From: marc.zyngier@arm•com (Marc Zyngier)
To: linux-arm-kernel@lists•infradead.org
Subject: [PATCH 1/7] ARM: KVM: simplify HYP mapping population
Date: Thu, 04 Apr 2013 13:35:17 +0100 [thread overview]
Message-ID: <515D7385.5050403@arm.com> (raw)
In-Reply-To: <20130403231344.GA29227@gmail.com>
On 04/04/13 00:13, Christoffer Dall wrote:
> On Tue, Apr 02, 2013 at 02:25:09PM +0100, Marc Zyngier wrote:
>> The way we populate HYP mappings is a bit convoluted, to say the least.
>> Passing a pointer around to keep track of the current PFN is quite
>> odd, and we end-up having two different PTE accessors for no good
>> reason.
>>
>> Simplify the whole thing by unifying the two PTE accessors, passing
>> a pgprot_t around, and moving the various validity checks to the
>> upper layers.
>>
>> Signed-off-by: Marc Zyngier <marc.zyngier@arm•com>
>> ---
>> arch/arm/kvm/mmu.c | 100 ++++++++++++++++++++++-------------------------------
>> 1 file changed, 41 insertions(+), 59 deletions(-)
>>
>> diff --git a/arch/arm/kvm/mmu.c b/arch/arm/kvm/mmu.c
>> index 2f12e40..24811d1 100644
>> --- a/arch/arm/kvm/mmu.c
>> +++ b/arch/arm/kvm/mmu.c
>> @@ -125,54 +125,34 @@ void free_hyp_pmds(void)
>> }
>>
>> static void create_hyp_pte_mappings(pmd_t *pmd, unsigned long start,
>> - unsigned long end)
>> + unsigned long end, unsigned long pfn,
>> + pgprot_t prot)
>> {
>> pte_t *pte;
>> unsigned long addr;
>> - struct page *page;
>>
>> - for (addr = start & PAGE_MASK; addr < end; addr += PAGE_SIZE) {
>> - unsigned long hyp_addr = KERN_TO_HYP(addr);
>> -
>> - pte = pte_offset_kernel(pmd, hyp_addr);
>> - BUG_ON(!virt_addr_valid(addr));
>> - page = virt_to_page(addr);
>> - kvm_set_pte(pte, mk_pte(page, PAGE_HYP));
>> - }
>> -}
>> -
>> -static void create_hyp_io_pte_mappings(pmd_t *pmd, unsigned long start,
>> - unsigned long end,
>> - unsigned long *pfn_base)
>> -{
>> - pte_t *pte;
>> - unsigned long addr;
>> -
>> - for (addr = start & PAGE_MASK; addr < end; addr += PAGE_SIZE) {
>> - unsigned long hyp_addr = KERN_TO_HYP(addr);
>> -
>> - pte = pte_offset_kernel(pmd, hyp_addr);
>> - BUG_ON(pfn_valid(*pfn_base));
>> - kvm_set_pte(pte, pfn_pte(*pfn_base, PAGE_HYP_DEVICE));
>> - (*pfn_base)++;
>> + for (addr = start; addr < end; addr += PAGE_SIZE) {
>> + pte = pte_offset_kernel(pmd, addr);
>> + kvm_set_pte(pte, pfn_pte(pfn, prot));
>> + pfn++;
>> }
>> }
>>
>> static int create_hyp_pmd_mappings(pud_t *pud, unsigned long start,
>> - unsigned long end, unsigned long *pfn_base)
>> + unsigned long end, unsigned long pfn,
>> + pgprot_t prot)
>> {
>> pmd_t *pmd;
>> pte_t *pte;
>> unsigned long addr, next;
>>
>> for (addr = start; addr < end; addr = next) {
>> - unsigned long hyp_addr = KERN_TO_HYP(addr);
>> - pmd = pmd_offset(pud, hyp_addr);
>> + pmd = pmd_offset(pud, addr);
>>
>> BUG_ON(pmd_sect(*pmd));
>>
>> if (pmd_none(*pmd)) {
>> - pte = pte_alloc_one_kernel(NULL, hyp_addr);
>> + pte = pte_alloc_one_kernel(NULL, addr);
>> if (!pte) {
>> kvm_err("Cannot allocate Hyp pte\n");
>> return -ENOMEM;
>> @@ -182,25 +162,17 @@ static int create_hyp_pmd_mappings(pud_t *pud, unsigned long start,
>>
>> next = pmd_addr_end(addr, end);
>>
>> - /*
>> - * If pfn_base is NULL, we map kernel pages into HYP with the
>> - * virtual address. Otherwise, this is considered an I/O
>> - * mapping and we map the physical region starting at
>> - * *pfn_base to [start, end[.
>> - */
>> - if (!pfn_base)
>> - create_hyp_pte_mappings(pmd, addr, next);
>> - else
>> - create_hyp_io_pte_mappings(pmd, addr, next, pfn_base);
>> + create_hyp_pte_mappings(pmd, addr, next, pfn, prot);
>> + pfn += (next - addr) >> PAGE_SHIFT;
>
> so this scheme always assumes a physically contiguous memory reason,
> and I wasn't sure if we ever wanted to support mapping vmalloc'ed
> regions into Hyp mode, which is why I wrote the code the way it was
> (which goes to your "for no good reason" comment above).
So let's look at what we're actually mapping:
- kernel code/kmalloc-ed data: this is always physically contiguous
- MMIO: While this is mapped in the vmalloc region, this is actually
physically contiguous.
> I'm fine with assuming that this only works for contiguous regions, but
> I think it deserves a line in the comments on the exported functions
> (the non-IO one anyway).
Sure, I'll add that.
>> }
>>
>> return 0;
>> }
>>
>> -static int __create_hyp_mappings(void *from, void *to, unsigned long *pfn_base)
>> +static int __create_hyp_mappings(pgd_t *pgdp,
>> + unsigned long start, unsigned long end,
>> + unsigned long pfn, pgprot_t prot)
>> {
>> - unsigned long start = (unsigned long)from;
>> - unsigned long end = (unsigned long)to;
>> pgd_t *pgd;
>> pud_t *pud;
>> pmd_t *pmd;
>> @@ -209,21 +181,14 @@ static int __create_hyp_mappings(void *from, void *to, unsigned long *pfn_base)
>>
>> if (start >= end)
>> return -EINVAL;
>> - /* Check for a valid kernel memory mapping */
>> - if (!pfn_base && (!virt_addr_valid(from) || !virt_addr_valid(to - 1)))
>> - return -EINVAL;
>> - /* Check for a valid kernel IO mapping */
>> - if (pfn_base && (!is_vmalloc_addr(from) || !is_vmalloc_addr(to - 1)))
>> - return -EINVAL;
>>
>> mutex_lock(&kvm_hyp_pgd_mutex);
>> - for (addr = start; addr < end; addr = next) {
>> - unsigned long hyp_addr = KERN_TO_HYP(addr);
>> - pgd = hyp_pgd + pgd_index(hyp_addr);
>> - pud = pud_offset(pgd, hyp_addr);
>> + for (addr = start & PAGE_MASK; addr < end; addr = next) {
>> + pgd = pgdp + pgd_index(addr);
>> + pud = pud_offset(pgd, addr);
>>
>> if (pud_none_or_clear_bad(pud)) {
>> - pmd = pmd_alloc_one(NULL, hyp_addr);
>> + pmd = pmd_alloc_one(NULL, addr);
>> if (!pmd) {
>> kvm_err("Cannot allocate Hyp pmd\n");
>> err = -ENOMEM;
>> @@ -233,9 +198,10 @@ static int __create_hyp_mappings(void *from, void *to, unsigned long *pfn_base)
>> }
>>
>> next = pgd_addr_end(addr, end);
>> - err = create_hyp_pmd_mappings(pud, addr, next, pfn_base);
>> + err = create_hyp_pmd_mappings(pud, addr, next, pfn, prot);
>> if (err)
>> goto out;
>> + pfn += (next - addr) >> PAGE_SHIFT;
>
> nit: consider passing a pointer to pfn instead? Not sure if it's nicer.
That's what we had before, and it wasn't that nice...
>> }
>> out:
>> mutex_unlock(&kvm_hyp_pgd_mutex);
>> @@ -255,7 +221,16 @@ out:
>> */
>> int create_hyp_mappings(void *from, void *to)
>> {
>> - return __create_hyp_mappings(from, to, NULL);
>> + unsigned long phys_addr = virt_to_phys(from);
>> + unsigned long start = KERN_TO_HYP((unsigned long)from);
>> + unsigned long end = KERN_TO_HYP((unsigned long)to);
>> +
>> + /* Check for a valid kernel memory mapping */
>> + if (!virt_addr_valid(from) || !virt_addr_valid(to - 1))
>> + return -EINVAL;
>> +
>> + return __create_hyp_mappings(hyp_pgd, start, end,
>> + __phys_to_pfn(phys_addr), PAGE_HYP);
>> }
>>
>> /**
>> @@ -267,10 +242,17 @@ int create_hyp_mappings(void *from, void *to)
>> * The resulting HYP VA is the same as the kernel VA, modulo
>> * HYP_PAGE_OFFSET.
>> */
>> -int create_hyp_io_mappings(void *from, void *to, phys_addr_t addr)
>> +int create_hyp_io_mappings(void *from, void *to, phys_addr_t phys_addr)
>
> nit: change the parameter documentation name as well.
Sure.
>
>> {
>> - unsigned long pfn = __phys_to_pfn(addr);
>> - return __create_hyp_mappings(from, to, &pfn);
>> + unsigned long start = KERN_TO_HYP((unsigned long)from);
>> + unsigned long end = KERN_TO_HYP((unsigned long)to);
>> +
>> + /* Check for a valid kernel IO mapping */
>> + if (!is_vmalloc_addr(from) || !is_vmalloc_addr(to - 1))
>> + return -EINVAL;
>> +
>> + return __create_hyp_mappings(hyp_pgd, start, end,
>> + __phys_to_pfn(phys_addr), PAGE_HYP_DEVICE);
>> }
>>
>> /**
>> --
>> 1.8.1.4
>>
>
> If the contigous thing is not a concern, then I'm happy about the
> simplification.
Thanks,
M.
--
Jazz is not dead. It just smells funny...
next prev parent reply other threads:[~2013-04-04 12:35 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-04-02 13:25 [PATCH 0/7] ARM: KVM: Revamping the HYP init code for fun and profit Marc Zyngier
2013-04-02 13:25 ` [PATCH 1/7] ARM: KVM: simplify HYP mapping population Marc Zyngier
2013-04-03 23:13 ` Christoffer Dall
2013-04-04 12:35 ` Marc Zyngier [this message]
2013-04-02 13:25 ` [PATCH 2/7] ARM: KVM: fix HYP mapping limitations around zero Marc Zyngier
2013-04-03 23:14 ` Christoffer Dall
2013-04-04 12:40 ` Marc Zyngier
2013-04-02 13:25 ` [PATCH 3/7] ARM: KVM: move to a KVM provided HYP idmap Marc Zyngier
2013-04-03 9:43 ` Will Deacon
2013-04-03 9:46 ` Marc Zyngier
2013-04-03 23:14 ` Christoffer Dall
2013-04-02 13:25 ` [PATCH 4/7] ARM: KVM: enforce page alignment for identity mapped code Marc Zyngier
2013-04-03 9:50 ` Will Deacon
2013-04-03 10:00 ` Marc Zyngier
2013-04-03 23:15 ` Christoffer Dall
2013-04-04 10:47 ` Marc Zyngier
2013-04-04 15:32 ` Christoffer Dall
2013-04-02 13:25 ` [PATCH 5/7] ARM: KVM: parametrize HYP page table freeing Marc Zyngier
2013-04-03 23:15 ` Christoffer Dall
2013-04-02 13:25 ` [PATCH 6/7] ARM: KVM: switch to a dual-step HYP init code Marc Zyngier
2013-04-03 10:07 ` Will Deacon
2013-04-03 10:38 ` Marc Zyngier
2013-04-03 23:15 ` Christoffer Dall
2013-04-04 11:05 ` Marc Zyngier
2013-04-03 23:15 ` Christoffer Dall
2013-04-04 12:52 ` Marc Zyngier
2013-04-04 22:10 ` Geoff Levand
2013-04-05 9:08 ` Marc Zyngier
2013-04-05 16:46 ` Geoff Levand
2013-04-05 16:54 ` Marc Zyngier
2013-04-18 15:54 ` Russell King - ARM Linux
2013-04-18 16:01 ` Marc Zyngier
2013-04-02 13:25 ` [PATCH 7/7] ARM: KVM: perform HYP initilization for hotplugged CPUs Marc Zyngier
2013-04-03 23:16 ` Christoffer Dall
2013-04-03 23:18 ` [PATCH 0/7] ARM: KVM: Revamping the HYP init code for fun and profit Christoffer Dall
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=515D7385.5050403@arm.com \
--to=marc.zyngier@arm$(echo .)com \
--cc=linux-arm-kernel@lists$(echo .)infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox