From: dgilbert@interlog•com (Douglas Gilbert)
To: linux-arm-kernel@lists•infradead.org
Subject: [PATCH] rtc: rtc-at91sam9.c add DT support
Date: Thu, 04 Apr 2013 09:25:42 -0400 [thread overview]
Message-ID: <515D7F56.90702@interlog.com> (raw)
In-Reply-To: <515D35C2.7050405@atmel.com>
On 13-04-04 04:11 AM, Nicolas Ferre wrote:
> On 04/04/2013 05:54 AM, Douglas Gilbert :
>> Some members of the at91 SoCs use the Real Time Timer (RTT)
>> and the General Purpose Backup Registers (GPBR) to implement
>> a real time clock (RTC). The AT91SAM9G20 is one example.
>>
>> Attached is a patch to add DT support to rtc-at91sam9.c .
>> The patch is against lk 3.9.0-rc5 .
>>
>> Below is a snippet of DT code for the 'G20 that was observed
>> to work with this patch:
>>
>> ahb {
>> apb {
>>
>> rtc {
>> compatible = "atmel,at91sam9-rtc";
>
> The compatible string has to be formed by the name of the first SoC
> compatible with this IP. It turns to be the at91sam9260.
> The second part of the string should be a name that reflects the nature
> of the peripheral. For this binding, I would like to mention the "RTT"
> in the compatibility string (because other drivers can use other RTT
> with other uses).
>
> What do you think about:
> "atmel,at91sam9260-rtt-as-rtc"? or something shorter?
Hi Nicolas,
Johan Hovold suggested:
atmel,at91sam9260-rtt
I notice (in the G20 doco) that the acronym RTTC is also used
for the rtt registers. What do you want?
>
>> /* RTTC followed by GPBR (backup registers) */
>> reg = <0xfffffd20 0x10>, <0xfffffd50 0x10>;
>> interrupts = <1 4 7>;
>> status = "okay";
>
> Last, but not least, when we add a DT binding, it is a requirement to
> add the corresponding documentation in the
> Documentation/devicetree/bindings/rtc/ directory.
I have been underwhelmed by the accuracy and the organisation
of information in that documentation. And the examples are
often misleading given the actual hierarchy of real dtsi/dts
config files.
Give me working examples any day. You could (and should) test
what I gave on a g20ek board.
Also I note there is no "bindings" documentation for
rtc-at91rm9200.c :-) After you, sir ....
Doug Gilbert
next prev parent reply other threads:[~2013-04-04 13:25 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-04-04 3:54 [PATCH] rtc: rtc-at91sam9.c add DT support Douglas Gilbert
2013-04-04 8:11 ` Nicolas Ferre
2013-04-04 13:25 ` Douglas Gilbert [this message]
2013-04-04 14:08 ` Nicolas Ferre
2013-04-04 19:14 ` Douglas Gilbert
2013-04-07 15:09 ` Johan Hovold
[not found] ` <1365347572-14972-1-git-send-email-jhovold@gmail.com>
2013-04-08 7:33 ` [RFC 1/5] ARM: at91: add general purpose backup register (GPBR) support Jean-Christophe PLAGNIOL-VILLARD
2013-04-08 8:46 ` Johan Hovold
2013-04-08 10:04 ` Jean-Christophe PLAGNIOL-VILLARD
2013-04-11 12:39 ` Johan Hovold
2013-04-11 14:53 ` Jean-Christophe PLAGNIOL-VILLARD
[not found] ` <1365347572-14972-2-git-send-email-jhovold@gmail.com>
2013-04-08 7:35 ` [RFC 2/5] ARM: at91/dts: " Jean-Christophe PLAGNIOL-VILLARD
[not found] ` <1365347572-14972-4-git-send-email-jhovold@gmail.com>
2013-04-08 7:38 ` [RFC 4/5] RTC: rtc-at91sam9: add device-tree support Jean-Christophe PLAGNIOL-VILLARD
2013-04-08 9:00 ` Johan Hovold
2013-04-08 9:57 ` Nicolas Ferre
2013-04-08 10:03 ` Jean-Christophe PLAGNIOL-VILLARD
2013-04-08 10:42 ` Nicolas Ferre
2013-04-08 11:02 ` Jean-Christophe PLAGNIOL-VILLARD
2013-04-08 10:48 ` Johan Hovold
2013-04-08 11:08 ` Jean-Christophe PLAGNIOL-VILLARD
2013-04-08 10:38 ` Johan Hovold
2013-04-08 11:11 ` Jean-Christophe PLAGNIOL-VILLARD
2013-04-11 12:57 ` Johan Hovold
2013-04-04 8:16 ` [PATCH] rtc: rtc-at91sam9.c add DT support Johan Hovold
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=515D7F56.90702@interlog.com \
--to=dgilbert@interlog$(echo .)com \
--cc=linux-arm-kernel@lists$(echo .)infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox