Subject: [PATCH 6/8] ARM: at91: sam9263: add fb dt support

From: [email-masked] (Nicolas Ferre)
Date: Tue, 16 Apr 2013 16:11:18 +0200

On 04/11/2013 05:00 PM, Jean-Christophe PLAGNIOL-VILLARD :
> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <[email-masked]>
> Cc: Nicolas Ferre <[email-masked]>
> ---
>  arch/arm/boot/dts/at91sam9263.dtsi |   39 ++++++++++++++++++++++++++++++++++++
>  1 file changed, 39 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi
> index 271d4de..3d0effa 100644
> --- a/arch/arm/boot/dts/at91sam9263.dtsi
> +++ b/arch/arm/boot/dts/at91sam9263.dtsi
> @@ -303,6 +303,34 @@
>  					};
>  				};
>  
> +				fb {
> +					pinctrl_fb: fb-0 {
> +						atmel,pins =
> +							<2 1 0x1 0x0	/* PC1 periph A */
> +							 2 2 0x1 0x0	/* PC2 periph A */
> +							 2 3 0x1 0x0	/* PC3 periph A */
> +							 1 9 0x2 0x0	/* PB9 periph B */
> +							 2 6 0x1 0x0	/* PC6 periph A */
> +							 2 7 0x1 0x0	/* PC7 periph A */
> +							 2 8 0x1 0x0	/* PC8 periph A */
> +							 2 9 0x1 0x0	/* PC9 periph A */
> +							 2 10 0x1 0x0	/* PC10 periph A */
> +							 2 11 0x1 0x0	/* PC11 periph A */
> +							 2 14 0x1 0x0	/* PC14 periph A */
> +							 2 15 0x1 0x0	/* PC15 periph A */
> +							 2 16 0x1 0x0	/* PC16 periph A */
> +							 2 12 0x2 0x0	/* PC12 periph B */
> +							 2 18 0x1 0x0	/* PC18 periph A */
> +							 2 19 0x1 0x0	/* PC19 periph A */
> +							 2 22 0x1 0x0	/* PC22 periph A */
> +							 2 23 0x1 0x0	/* PC23 periph A */
> +							 2 24 0x1 0x0	/* PC24 periph A */
> +							 2 17 0x2 0x0	/* PC17 periph B */
> +							 2 26 0x1 0x0	/* PC26 periph A */
> +							 2 27 0x1 0x0>;	/* PC27 periph A */

Verified, okay.

> +					};
> +				};
> +
>  				pioA: gpio at fffff200 {
>  					compatible = "atmel,at91rm9200-gpio";
>  					reg = <0xfffff200 0x200>;
> @@ -464,6 +492,17 @@
>  			};
>  		};
>  
> +		fb0: fb at 0x00500000 {

No, it is 0x700000

> +			compatible = "atmel,at91sam9263-lcdc";
> +			reg = <0x00700000 0x1000>;

Ditto.

> +			interrupts = <26 3 0>;

<26 4 0> here.

> +			pinctrl-names = "default";
> +			pinctrl-0 = <&pinctrl_fb>;
> +			status = "disabled";
> +			#address-cells = <1>;
> +			#size-cells = <1>;

Ditto in 9g45 case.

> +		};
> +
>  		nand0: nand at 40000000 {
>  			compatible = "atmel,at91rm9200-nand";
>  			#address-cells = <1>;
> 

-- 
Nicolas Ferre