From: kgene.kim@samsung•com (Kukjin Kim)
To: linux-arm-kernel@lists•infradead.org
Subject: [GIT PULL] Late Exynos stuff for v3.10
Date: Wed, 24 Apr 2013 07:09:27 +0900 [thread overview]
Message-ID: <51770697.7080504@samsung.com> (raw)
In-Reply-To: <5176B499.1000208@samsung.com>
On 04/24/13 01:19, Kukjin Kim wrote:
> The following changes since commit
> 58a7bbf75442ea439a4d3b7993ad87023e406063:
>
> ARM: dts: add PDMA0 changes for exynos5440 (2013-04-09 01:39:27 +0900)
>
> are available in the git repository at:
>
> git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung.git
> tags/late-exynos-for-v3.10
>
> for you to fetch changes up to 9007025f3438ec3bdea02439e760585345102b8d:
>
> ARM: dts: Disable the RTC by default on exynos5 (2013-04-24 00:32:28 +0900)
>
> ----------------------------------------------------------------
> This includes late exynos stuff for v3.10 1) keypad for smdk4412 and
> origen4412 boards 2) adds mfc clock entries for exynos4 3) enables
> usb2phy, usb3phy and dwc3-exynos for exynos5250 4) enables tmu for
> exynos4210 5) support chip id with dt
>
> ----------------------------------------------------------------
> Doug Anderson (1):
> ARM: dts: Disable the RTC by default on exynos5
>
> Girish K S (1):
> ARM: EXYNOS: force MAC ip to 32bit DMA
>
> Sachin Kamat (7):
> ARM: dts: Remove keypad entries from exynos4x12-pinctrl.dtsi
> ARM: dts: Add keypad entries to Exynos4412 based Origen
> ARM: dts: Add keypad entries to SMDK4412
> ARM: dts: Add MFC clock entries for exynos4
> ARM: dts: Update MFC documentation for clock entries
> ARM: dts: Add TMU clock entries to exynos4210.dtsi
> ARM: dts: Enable TMU on Origen4210 board
>
> Thomas Abraham (4):
> ARM: dts: add mshc controller node for Exynos4x12 SoCs
> ARM: EXYNOS: Add a platform bus notifier to set dma masks for Exynos5440
> ARM: EXYNOS: Create virtual I/O mapping for Chip-ID controller using
> device tree
> ARM: dts: Add chip-id controller node on Exynos4/5 SoC
>
> Vivek Gautam (5):
> ARM: dts: Enabling samsung-usb2phy driver for exynos5250
> ARM: dts: Enabling samsung-usb3phy driver for exynos5250
> ARM: dts: Add device tree bindings for dwc3-exynos
> ARM: dts: Enabling dwc3-exynos driver for exynos5250
> ARM: EXYNOS: Enable XHCI support on exynos5
>
> .../devicetree/bindings/media/s5p-mfc.txt | 5 ++
> .../devicetree/bindings/usb/exynos-usb.txt | 34 +++++++++
> arch/arm/boot/dts/exynos4.dtsi | 7 ++
> arch/arm/boot/dts/exynos4210-origen.dts | 4 +
> arch/arm/boot/dts/exynos4210.dtsi | 3 +
> arch/arm/boot/dts/exynos4412-origen.dts | 62 +++++++++++++++
> arch/arm/boot/dts/exynos4412-smdk4412.dts | 87 ++++++++++++++++++++++
> arch/arm/boot/dts/exynos4412.dtsi | 8 ++
> arch/arm/boot/dts/exynos4x12-pinctrl.dtsi | 56 --------------
> arch/arm/boot/dts/exynos5250.dtsi | 51 +++++++++++++
> arch/arm/boot/dts/exynos5440.dtsi | 1 +
> arch/arm/mach-exynos/Kconfig | 1 +
> arch/arm/mach-exynos/common.c | 53 +++++++------
> arch/arm/mach-exynos/include/mach/map.h | 1 -
> arch/arm/mach-exynos/mach-exynos5-dt.c | 28 +++++++
> 15 files changed, 321 insertions(+), 80 deletions(-)
>
> Hi Arnd and Olof,
>
> As I said, last my pull-request at 4/10 included most of above changes.
> So would be nice if you could pull this and small patches added on top
> of that though.
>
> If any problems, please kindly let me know.
>
Arnd, Olof,
Since above request should be too late, so I did sort out like
following. I think, it should be fine to you ;-) Sorry for noise.
Note that others will be queued for v3.11.
Thanks.
- Kukjin
The following changes since commit
58a7bbf75442ea439a4d3b7993ad87023e406063:
ARM: dts: add PDMA0 changes for exynos5440 (2013-04-09 01:39:27 +0900)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung.git
tags/late-exynos-v2-for-v3.10
for you to fetch changes up to 1ec583759692013c4576d557904b595e9f3953dd:
ARM: dts: Disable the RTC by default on exynos5 (2013-04-24 06:58:21
+0900)
----------------------------------------------------------------
This includes late exynos stuff for v3.10 and 2nd version for pull
request 1) enables usb2phy, usb3phy and dwc3-exynos for exynos5250 2)
support chip id with dt
----------------------------------------------------------------
Doug Anderson (1):
ARM: dts: Disable the RTC by default on exynos5
Thomas Abraham (3):
ARM: dts: add mshc controller node for Exynos4x12 SoCs
ARM: EXYNOS: Create virtual I/O mapping for Chip-ID controller
using device tree
ARM: dts: Add chip-id controller node on Exynos4/5 SoC
Vivek Gautam (5):
ARM: dts: Enabling samsung-usb2phy driver for exynos5250
ARM: dts: Enabling samsung-usb3phy driver for exynos5250
ARM: dts: Add device tree bindings for dwc3-exynos
ARM: dts: Enabling dwc3-exynos driver for exynos5250
ARM: EXYNOS: Enable XHCI support on exynos5
.../devicetree/bindings/usb/exynos-usb.txt | 34 ++++++++++++++
arch/arm/boot/dts/exynos4.dtsi | 5 ++
arch/arm/boot/dts/exynos4412.dtsi | 8 ++++
arch/arm/boot/dts/exynos5250.dtsi | 51
+++++++++++++++++++++
next prev parent reply other threads:[~2013-04-23 22:09 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-04-23 16:19 [GIT PULL] Late Exynos stuff for v3.10 Kukjin Kim
2013-04-23 22:09 ` Kukjin Kim [this message]
2013-04-24 0:06 ` Olof Johansson
2013-04-25 15:38 ` Kukjin Kim
2013-05-09 23:47 ` Olof Johansson
2013-05-10 0:31 ` Kukjin Kim
2013-05-14 5:40 ` Tushar Behera
2013-05-14 12:31 ` Kukjin Kim
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=51770697.7080504@samsung.com \
--to=kgene.kim@samsung$(echo .)com \
--cc=linux-arm-kernel@lists$(echo .)infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox