Subject: [RFC 5/8] ARM:stih41x: Add STiH415 SOC support

From: [email-masked] (Srinivas KANDAGATLA)
Date: Wed, 08 May 2013 18:03:23 +0100

Thankyou for the comments.
On 08/05/13 17:18, Arnd Bergmann wrote:
> On Wednesday 08 May 2013, Srinivas KANDAGATLA wrote:
>> From: Srinivas Kandagatla <[email-masked]>
>>
>> The STiH415 is the next generation of HD, AVC set-top box processors for
>> satellite, cable, terrestrial and IP-STB markets. It is an ARM Cortex-A9
>> 1.0 GHz, dual-core CPU.
>>
>> Signed-off-by: Srinivas Kandagatla <[email-masked]>
>> CC: Stephen Gallimore <[email-masked]>
>> CC: Stuart Menefy <[email-masked]>
>> ---
>>  Documentation/arm/STiH41x/overview.txt         |   39 ++
>>  Documentation/arm/STiH41x/stih415-overview.txt |   12 +
>>  arch/arm/Kconfig                               |    3 +
>>  arch/arm/Kconfig.debug                         |   38 ++
>>  arch/arm/Makefile                              |    2 +
>>  arch/arm/boot/dts/stih415-clock.dtsi           |   38 ++
>>  arch/arm/boot/dts/stih415-pinctrl.dtsi         |  480 ++++++++++++++++++++++++
>>  arch/arm/boot/dts/stih415.dtsi                 |   94 +++++
>>  arch/arm/boot/dts/stih415.h                    |   20 +
>>  arch/arm/boot/dts/stih41x.dtsi                 |   30 ++
>>  arch/arm/boot/dts/stixxxx-pincfg.h             |   95 +++++
>>  arch/arm/configs/stih41x_defconfig             |   94 +++++
>>  arch/arm/include/debug/stixxxx.S               |   61 +++
>>  arch/arm/mach-stih41x/Kconfig                  |   35 ++
>>  arch/arm/mach-stih41x/Makefile                 |    4 +
>>  arch/arm/mach-stih41x/board-dt.c               |   76 ++++
>>  arch/arm/mach-stih41x/stih41x.c                |   82 ++++
>>  arch/arm/mach-stih41x/stih41x.h                |    7 +
>>  arch/arm/plat-stixxxx/Kconfig                  |    2 +
>>  arch/arm/plat-stixxxx/Makefile                 |    2 +
>>  arch/arm/plat-stixxxx/headsmp.S                |   44 +++
>>  arch/arm/plat-stixxxx/include/plat/hardware.h  |   20 +
>>  arch/arm/plat-stixxxx/include/plat/smp.h       |   19 +
>>  arch/arm/plat-stixxxx/platsmp.c                |  144 +++++++
> I think there is no point in having a separate mach- and plat- directory
> here, given that modern machines require very little code. You can probably
> fold the three files in mach-stih41x (board-dt.c, stih41x.c and stih41x.h)
> into a single file and rename plat-stixxxx to mach-stixxxx
Yep, sounds good.
>
>> diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
>> index 9b31f43..42a5193 100644
>> --- a/arch/arm/Kconfig.debug
>> +++ b/arch/arm/Kconfig.debug
>> @@ -447,6 +447,16 @@ choice
>>  		  This option selects UART0 on VIA/Wondermedia System-on-a-chip
>>  		  devices, including VT8500, WM8505, WM8650 and WM8850.
>>  
>> +	config DEBUG_STIH41X_UART
>> +		depends on ARCH_STIH41X
>> +		bool "Use StiH415/416 ASC for low-level debug"
>> +		help
>> +		  Say Y here if you want kernel low-level debugging support
>> +		  on StiH415/416 based platforms like B2000, B2020.
>> +		  It support UART2 and SBC_UART1.
>> +
>> +		  If unsure, say N.
>> +
>>  	config DEBUG_LL_UART_NONE
>>  		bool "No low-level debugging UART"
>>  		depends on !ARCH_MULTIPLATFORM
> I would split out the debug code into a separate patch though.
Will do this in next version.
>
>> @@ -600,6 +637,7 @@ config DEBUG_LL_INCLUDE
>>  	default "debug/vt8500.S" if DEBUG_VT8500_UART0
>>  	default "debug/tegra.S" if DEBUG_TEGRA_UART
>>  	default "debug/zynq.S" if DEBUG_ZYNQ_UART0 || DEBUG_ZYNQ_UART1
>> +	default "debug/stixxxx.S" if DEBUG_STIH41X_UART
>>  	default "mach/debug-macro.S"
> Please keep this in alphabetical order.
Yes.
>
>> +	soc {
>> +		#address-cells = <1>;
>> +		#size-cells = <1>;
>> +		#interrupt-cells = <3>;
>> +		interrupt-parent = <&intc>;
> The "#interrupt-cells" property doesn't belong here I think.
>
>> +
>> +		uart2: uart at fed32000 {
>> +			compatible	= "st,asc";
>> +			status 		= "disabled";
>> +			reg		= <0xfed32000 0x2c>;
>> +			interrupts	= <0 197 0>;
>> +			pinctrl-names 	= "default";
>> +			pinctrl-0 	= <&pinctrl_uart2>;
>> +			clocks		= <&CLKS_ICN_REG_0>;
>> +		};
>> +
>> +		/* SBC comms block ASCs in SASG1 */
>> +		sbc_uart1: uart at fe531000 {
>> +			compatible	= "st,asc";
>> +			status 		= "disabled";
>> +			reg		= <0xfe531000 0x2c>;
>> +			interrupts	= <0 210 0>;
>> +			clocks		= <&CLK_SYSIN>;
>> +			pinctrl-names 	= "default";
>> +			pinctrl-0	= <&pinctrl_sbc_uart1>;
>> +		};
>> +	};
> Please name these devices "serial", not "uart".
Ok, I will rename them to serial.
>> diff --git a/arch/arm/configs/stih41x_defconfig b/arch/arm/configs/stih41x_defconfig
>> new file mode 100644
>> index 0000000..dd9268b
>> --- /dev/null
>> +++ b/arch/arm/configs/stih41x_defconfig
> I would prefer to have this be part of multi_v7_defconfig, unless
> you have strong reason why it can't be.
I think we can move this to multi_v7_defconfig.
>> diff --git a/arch/arm/mach-stih41x/Kconfig b/arch/arm/mach-stih41x/Kconfig
>> new file mode 100644
>> index 0000000..9c40540
>> --- /dev/null
>> +++ b/arch/arm/mach-stih41x/Kconfig
>> @@ -0,0 +1,35 @@
>> +config ARCH_STIH41X
>> +	bool "STMicroelectronics STiH41x SOCs with Flattened Device Tree" if ARCH_MULTI_V7
>> +	select GENERIC_CLOCKEVENTS
>> +	select CLKDEV_LOOKUP
>> +	select ARM_GIC
>
>> +if ARCH_STIH41X
>> +menu "STMicroelectronics Consumer Electronics SOCs"
> You can use 'menuconfig' to combine these two.
Thats a nice one.. Will use it.
>> +static void __init stih41x_timer_init(void)
>> +{
>> +	of_clk_init(NULL);
>> +	clocksource_of_init();
>> +	stih41x_l2x0_init();
>> +}
> I'm hoping we can kill make the clk and l2x0 init work by default in 3.11,
> as clocksource_of_init already does, so you won't need this function
> any more.
Ok.
>
>> +/*
>> + * A basic implementation of irq_set_wake that ensures wakeup source
>> + * interrupts are not disabled during PM_SUSPEND_FREEZE.
>> + */
>> +static int stih41x_set_wake(struct irq_data *d, unsigned int on)
>> +{
>> +	struct irq_desc *desc = irq_to_desc(d->irq);
>> +
>> +	if (on) {
>> +		if (desc->action)
>> +			desc->action->flags |= IRQF_NO_SUSPEND;
>> +	} else {
>> +		if (desc->action)
>> +			desc->action->flags &= ~IRQF_NO_SUSPEND;
>> +	}
>> +	return 0;
>> +}
>> +
>> +static void __init stih41x_irq_init(void)
>> +{
>> +	gic_arch_extn.irq_set_wake = stih41x_set_wake;
>> +	gic_arch_extn.flags = IRQCHIP_MASK_ON_SUSPEND;
>> +
>> +	irqchip_init();
>> +}
> This looks like it should be generic. Why do you need this?

>
>> +void __init stih41x_dt_init(void)
>> +{
>> +	of_platform_populate(NULL, of_default_bus_match_table,
>> +				NULL, NULL);
>> +	return;
>> +}
> This is already not needed in 3.10.
Ok, cool... will get rid of this..
>
>> +static struct map_desc stih41x_io_desc[] __initdata = {
>> +#ifdef CONFIG_SMP
>> +	{
>> +		.virtual	= IO_ADDRESS(MPE41_SCU_BASE),
>> +		.pfn		= __phys_to_pfn(MPE41_SCU_BASE),
>> +		.length		= SZ_4K,
>> +		.type		= MT_DEVICE,
>> +	},
>> +#endif
>> +void __init stih41x_map_io(void)
>> +{
>> +#ifdef CONFIG_SMP
>> +	stixxxx_scu_base_addr = ((void __iomem *)IO_ADDRESS(MPE41_SCU_BASE));
>> +#endif
>> +	iotable_init(stih41x_io_desc, ARRAY_SIZE(stih41x_io_desc));
>> +}
> IIRC the SCU no longer needs to be mapped this early, so you can use
> ioremap these days.
yep, I agree.
>
>> +void __init stih41x_l2x0_init(void)
>> +{
>> +	u32 way_size = 0x4;
>> +	u32 aux_ctrl;
>> +
>> +	aux_ctrl = (0x1 << L2X0_AUX_CTRL_SHARE_OVERRIDE_SHIFT) |
>> +		(0x1 << L2X0_AUX_CTRL_DATA_PREFETCH_SHIFT) |
>> +		(0x1 << L2X0_AUX_CTRL_INSTR_PREFETCH_SHIFT) |
>> +		(way_size << L2X0_AUX_CTRL_WAY_SIZE_SHIFT);
>> +
>> +	l2x0_of_init(aux_ctrl, L2X0_AUX_CTRL_MASK);
>> +}
> I don't know where we stand on this, but I think we should kill all
> calls like these.
I agree, but we don't have other ways as of today..
> 	Arnd