From: hector.palacios@digi•com (Hector Palacios)
To: linux-arm-kernel@lists•infradead.org
Subject: Chipidea usb otg support for IMX/MXS (device functionality)
Date: Thu, 30 May 2013 18:17:47 +0200 [thread overview]
Message-ID: <51A77BAB.4060101@digi.com> (raw)
In-Reply-To: <20130529075044.GC3293@lukather>
Dear Maxime,
On 05/29/2013 09:50 AM, maxime.ripard at free-electrons.com wrote:
> Hi,
>
> On Wed, May 29, 2013 at 07:11:30AM +0000, Chen Peter-B29397 wrote:
>>
>>> Hello,
>>>
>>> Am I right in assuming that the MXS USB on-the-go port does not currently
>>> support the
>>> device (gadget) functionality?
>>> Anybody out there working on that?
>>>
>>
>> As far as I know, Maxime Ripard may already let the chipidea durl-role function
>> work ok at mx28. It may need my chipidea otg patch
>>
>> https://github.com/hzpeterchen/linux-usb.git
>
> Indeed, I've been using the patchset "Add tested id switch and vbus
> connect detect support for Chipidea" from Peter for quite some time on
> top of 3.9 and it works like a charm for the gadget mode on an MX28
> platform.
>
> BTW, Peter, I've seen that these patches are still not merged in 3.10,
> is there a reason for that? do you plan on sending a version rebased on
> top of 3.10 some time in the future? I tried to do the rebasing myself,
> but the chipidea driver seems to have changed quite heavily, which makes
> the process quite difficult when you don't know what you're doing :)
I guess you didn't get rid of the 'possible circular locking dependency' you talked
about at [1], right? I experimented the same and also a BUG [2] after cable reconnection.
Despite those, I ran a simple test of serial, ethernet, and mass_storage gadgets and
they worked fine.
I didn't use the new properties (phy_type, dr_mode...) in the DT of my mx28 platform,
did you?
[1] https://lkml.org/lkml/2013/3/6/200
[2]
[ 1949.074726] BUG: spinlock lockup suspected on CPU#0, swapper/0
[ 1949.080623] lock: 0xcf41f014, .magic: dead4ead, .owner: swapper/0, .owner_cpu: 0
[ 1949.088184] [<c001510c>] (unwind_backtrace+0x0/0xf4) from [<c0273754>]
(do_raw_spin_lock+0x104/0x14c)
[ 1949.097463] [<c0273754>] (do_raw_spin_lock+0x104/0x14c) from [<c045893c>]
(_raw_spin_lock_irqsave+0x50/0x5c)
[ 1949.107340] [<c045893c>] (_raw_spin_lock_irqsave+0x50/0x5c) from [<c03467f8>]
(ep_disable+0x30/0xfc)
[ 1949.116541] [<c03467f8>] (ep_disable+0x30/0xfc) from [<bf00a19c>]
(gserial_disconnect+0x9c/0x174 [g_serial])
[ 1949.126447] [<bf00a19c>] (gserial_disconnect+0x9c/0x174 [g_serial]) from
[<bf00a288>] (acm_disable+0xc/0x2c [g_serial])
[ 1949.137325] [<bf00a288>] (acm_disable+0xc/0x2c [g_serial]) from [<bf000930>]
(reset_config+0x34/0x5c [libcomposite])
[ 1949.147931] [<bf000930>] (reset_config+0x34/0x5c [libcomposite]) from [<bf000fd0>]
(composite_disconnect+0x34/0x5c [libcomposite])
[ 1949.159737] [<bf000fd0>] (composite_disconnect+0x34/0x5c [libcomposite]) from
[<c0347b14>] (udc_irq+0x1d8/0xbe4)
[ 1949.169951] [<c0347b14>] (udc_irq+0x1d8/0xbe4) from [<c0345830>] (ci_irq+0x9c/0x104)
[ 1949.177751] [<c0345830>] (ci_irq+0x9c/0x104) from [<c006cb50>]
(handle_irq_event_percpu+0x5c/0x26c)
[ 1949.186847] [<c006cb50>] (handle_irq_event_percpu+0x5c/0x26c) from [<c006cd9c>]
(handle_irq_event+0x3c/0x5c)
[ 1949.196716] [<c006cd9c>] (handle_irq_event+0x3c/0x5c) from [<c006f3c8>]
(handle_level_irq+0x8c/0x118)
[ 1949.205976] [<c006f3c8>] (handle_level_irq+0x8c/0x118) from [<c006cae4>]
(generic_handle_irq+0x28/0x30)
[ 1949.215421] [<c006cae4>] (generic_handle_irq+0x28/0x30) from [<c001009c>]
(handle_IRQ+0x30/0x84)
[ 1949.224246] [<c001009c>] (handle_IRQ+0x30/0x84) from [<c00086ec>]
(icoll_handle_irq+0x30/0x44)
[ 1949.232897] [<c00086ec>] (icoll_handle_irq+0x30/0x44) from [<c000ee24>]
(__irq_svc+0x44/0x54)
[ 1949.241438] Exception stack(0xc0627f68 to 0xc0627fb0)
[ 1949.246520] 7f60: c0010278 0005317f 0005217f 60000013 c0626000
c0667c88
[ 1949.254729] 7f80: c0631980 7fffffff 40004000 41069265 4061c574 00000000 600000d3
c0627fb0
[ 1949.262926] 7fa0: c0010278 c0010284 60000013 ffffffff
[ 1949.268023] [<c000ee24>] (__irq_svc+0x44/0x54) from [<c0010284>]
(default_idle+0x40/0x48)
[ 1949.276244] [<c0010284>] (default_idle+0x40/0x48) from [<c00105b8>]
(cpu_idle+0x68/0xd0)
[ 1949.284380] [<c00105b8>] (cpu_idle+0x68/0xd0) from [<c0600810>]
(start_kernel+0x258/0x298)
[ 1953.034550] gadget: high-speed config #2: CDC ACM config
Regards,
--
H?ctor Palacios
next prev parent reply other threads:[~2013-05-30 16:17 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <51A5A808.2070803@digi.com>
[not found] ` <F281D0F91ED19E4D8E63A7504E8A649803E8A3F3@039-SN2MPN1-021.039d.mgd.msft.net>
2013-05-29 7:50 ` Chipidea usb otg support for IMX/MXS (device functionality) maxime.ripard at free-electrons.com
2013-05-29 8:07 ` Chen Peter-B29397
2013-05-29 10:13 ` Michael Grzeschik
2013-05-29 12:19 ` maxime.ripard at free-electrons.com
2013-05-29 12:41 ` Michael Grzeschik
2013-05-30 13:53 ` maxime.ripard at free-electrons.com
2013-06-21 11:26 ` Marek Vasut
2013-06-21 12:22 ` Michael Grzeschik
2013-06-21 12:56 ` Marek Vasut
2013-06-22 2:33 ` Marek Vasut
2013-06-22 8:28 ` Chen Peter-B29397
2013-06-22 13:29 ` Marek Vasut
2013-06-24 1:37 ` Chen Peter-B29397
2013-06-24 7:08 ` Shawn Guo
2013-06-24 13:51 ` Marek Vasut
2013-06-25 1:48 ` Chen Peter-B29397
2013-06-25 18:40 ` Marek Vasut
2013-06-27 13:49 ` Marek Vasut
2013-06-28 6:48 ` Chen Peter-B29397
2013-06-28 9:42 ` Marek Vasut
2013-06-28 10:46 ` Chen Peter-B29397
2013-06-28 11:56 ` Marek Vasut
2013-06-28 13:04 ` Chen Peter-B29397
2013-06-28 13:11 ` Fabio Estevam
2013-07-01 2:06 ` Chen Peter-B29397
2013-07-07 1:10 ` Marek Vasut
2013-07-08 1:21 ` Chen Peter-B29397
2013-07-08 20:56 ` Marek Vasut
2013-07-09 1:05 ` Chen Peter-B29397
2013-07-09 10:38 ` Marek Vasut
2013-06-25 14:23 ` Fabio Estevam
2013-06-25 15:39 ` Fabio Estevam
2013-06-25 18:42 ` Marek Vasut
2013-07-09 15:07 ` Marek Vasut
2013-05-30 16:17 ` Hector Palacios [this message]
2013-06-07 9:37 ` maxime.ripard at free-electrons.com
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=51A77BAB.4060101@digi.com \
--to=hector.palacios@digi$(echo .)com \
--cc=linux-arm-kernel@lists$(echo .)infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox