From: javier.martinez@collabora•co.uk (Javier Martinez Canillas)
To: linux-arm-kernel@lists•infradead.org
Subject: [PATCH 3/3] ARM: dts: OMAP3: Use MTD constants for OMAP3 boards
Date: Tue, 11 Jun 2013 17:29:43 +0200 [thread overview]
Message-ID: <51B74267.1000700@collabora.co.uk> (raw)
In-Reply-To: <1370962138-9631-4-git-send-email-florian.vaussard@epfl.ch>
On 06/11/2013 04:48 PM, Florian Vaussard wrote:
> Use the MTD constants for NAND and OneNAND nodes used in OMAP3
> DTS.
>
> Signed-off-by: Florian Vaussard <florian.vaussard@epfl•ch>
> ---
> arch/arm/boot/dts/omap3-devkit8000.dts | 10 +++++-----
> arch/arm/boot/dts/omap3-igep0020.dts | 10 +++++-----
> arch/arm/boot/dts/omap3-igep0030.dts | 10 +++++-----
> arch/arm/boot/dts/omap3430-sdp.dts | 28 ++++++++++++++--------------
> 4 files changed, 29 insertions(+), 29 deletions(-)
>
> diff --git a/arch/arm/boot/dts/omap3-devkit8000.dts b/arch/arm/boot/dts/omap3-devkit8000.dts
> index 5be71b1..08699cb 100644
> --- a/arch/arm/boot/dts/omap3-devkit8000.dts
> +++ b/arch/arm/boot/dts/omap3-devkit8000.dts
> @@ -143,27 +143,27 @@
>
> x-loader at 0 {
> label = "X-Loader";
> - reg = <0 0x80000>;
> + reg = <(0 * SZ_128K) (4 * SZ_128K)>;
> };
>
> bootloaders at 80000 {
> label = "U-Boot";
> - reg = <0x80000 0x1e0000>;
> + reg = <(4 * SZ_128K) (15 * SZ_128K)>;
> };
>
> bootloaders_env at 260000 {
> label = "U-Boot Env";
> - reg = <0x260000 0x20000>;
> + reg = <(19 * SZ_128K) (1 * SZ_128K)>;
> };
>
> kernel at 280000 {
> label = "Kernel";
> - reg = <0x280000 0x400000>;
> + reg = <(20 * SZ_128K) (32 * SZ_128K)>;
> };
>
> filesystem at 680000 {
> label = "File System";
> - reg = <0x680000 0xf980000>;
> + reg = <(52 * SZ_128K) MTDPART_SIZ_FULL>;
> };
> };
> };
> diff --git a/arch/arm/boot/dts/omap3-igep0020.dts b/arch/arm/boot/dts/omap3-igep0020.dts
> index e8c4828..3476b3c 100644
> --- a/arch/arm/boot/dts/omap3-igep0020.dts
> +++ b/arch/arm/boot/dts/omap3-igep0020.dts
> @@ -97,23 +97,23 @@
>
> partition at 0 {
> label = "SPL";
> - reg = <0 0x100000>;
> + reg = <(0 * SZ_256K) (4 * SZ_256K)>;
> };
> partition at 0x80000 {
> label = "U-Boot";
> - reg = <0x100000 0x180000>;
> + reg = <(4 * SZ_256K) (6 * SZ_256K)>;
> };
> partition at 0x1c0000 {
> label = "Environment";
> - reg = <0x280000 0x100000>;
> + reg = <(10 * SZ_256K) (4 * SZ_256K)>;
> };
> partition at 0x280000 {
> label = "Kernel";
> - reg = <0x380000 0x300000>;
> + reg = <(14 * SZ_256K) (12 * SZ_256K)>;
> };
> partition at 0x780000 {
> label = "Filesystem";
> - reg = <0x680000 0x1f980000>;
> + reg = <(26 * SZ_256K) MTDPART_SIZ_FULL>;
> };
> };
>
> diff --git a/arch/arm/boot/dts/omap3-igep0030.dts b/arch/arm/boot/dts/omap3-igep0030.dts
> index 644d053..e4f078c 100644
> --- a/arch/arm/boot/dts/omap3-igep0030.dts
> +++ b/arch/arm/boot/dts/omap3-igep0030.dts
> @@ -72,23 +72,23 @@
>
> partition at 0 {
> label = "SPL";
> - reg = <0 0x100000>;
> + reg = <(0 * SZ_256K) (4 * SZ_256K)>;
> };
> partition at 0x80000 {
> label = "U-Boot";
> - reg = <0x100000 0x180000>;
> + reg = <(4 * SZ_256K) (6 * SZ_256K)>;
> };
> partition at 0x1c0000 {
> label = "Environment";
> - reg = <0x280000 0x100000>;
> + reg = <(10 * SZ_256K) (4 * SZ_256K)>;
> };
> partition at 0x280000 {
> label = "Kernel";
> - reg = <0x380000 0x300000>;
> + reg = <(14 * SZ_256K) (12 * SZ_256K)>;
> };
> partition at 0x780000 {
> label = "Filesystem";
> - reg = <0x680000 0x1f980000>;
> + reg = <(26 * SZ_256K) MTDPART_SIZ_FULL>;
> };
> };
> };
Hi Florian,
I don't have access to my IGEP board so I can test it right now but the patch
looks good to me.
In fact I wanted to use MTDPART_SIZ_FULL when added the NAND nodes since not all
IGEP boards have 512MB flash but I didn't know that a value of 0 meant that.
So thanks a lot for doing this!
Acked-by: Javier Martinez Canillas <javier.martinez@collabora•co.uk>
next prev parent reply other threads:[~2013-06-11 15:29 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-06-11 14:48 [PATCH 0/3] ARM: dts: OMAP3: Use constants with MTD devices Florian Vaussard
2013-06-11 14:48 ` [PATCH 1/3] ARM: dts: Add headers with constants for MTD partitions Florian Vaussard
2013-06-11 16:24 ` Stephen Warren
2013-06-11 17:28 ` Florian Vaussard
2013-06-12 13:05 ` Grant Likely
2013-06-19 9:19 ` Florian Vaussard
2013-06-11 14:48 ` [PATCH 2/3] ARM: dts: Add omap3-overo NAND flash memory binding Florian Vaussard
2013-06-11 14:48 ` [PATCH 3/3] ARM: dts: OMAP3: Use MTD constants for OMAP3 boards Florian Vaussard
2013-06-11 15:29 ` Javier Martinez Canillas [this message]
2013-06-11 17:30 ` Florian Vaussard
2013-06-12 13:11 ` Grant Likely
2013-06-11 16:27 ` Stephen Warren
2013-06-11 17:31 ` Florian Vaussard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=51B74267.1000700@collabora.co.uk \
--to=javier.martinez@collabora$(echo .)co.uk \
--cc=linux-arm-kernel@lists$(echo .)infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox