Subject: [PATCH 2/5] iio: at91: Use different prescal, startup mask in MR for different IP

From: [email-masked] (Josh Wu)
Date: Tue, 16 Jul 2013 16:35:54 +0800

Hi, Maxime

On 7/15/2013 8:58 PM, Maxime Ripard wrote:
> Hi Josh,
>
> On Sun, Jul 14, 2013 at 04:04:26PM +0800, Josh Wu wrote:
>> For at91 boards, there are different IPs for adc. Different IPs has different
>> STARTUP & PRESCAL mask in ADC_MR.
>>
>> This patch can change the masks according to the different IP version.
>>
>> Signed-off-by: Josh Wu <[email-masked]>
>> ---
>>   arch/arm/mach-at91/include/mach/at91_adc.h |    9 ++++--
>>   drivers/iio/adc/at91_adc.c                 |   48 ++++++++++++++++++++++++++--
>>   2 files changed, 53 insertions(+), 4 deletions(-)
>>
>> diff --git a/arch/arm/mach-at91/include/mach/at91_adc.h b/arch/arm/mach-at91/include/mach/at91_adc.h
>> index 8e7ed5c..ab273ee 100644
>> --- a/arch/arm/mach-at91/include/mach/at91_adc.h
>> +++ b/arch/arm/mach-at91/include/mach/at91_adc.h
>> @@ -28,9 +28,12 @@
>>   #define			AT91_ADC_TRGSEL_EXTERNAL	(6 << 1)
>>   #define		AT91_ADC_LOWRES		(1 << 4)	/* Low Resolution */
>>   #define		AT91_ADC_SLEEP		(1 << 5)	/* Sleep Mode */
>> -#define		AT91_ADC_PRESCAL	(0x3f << 8)	/* Prescalar Rate Selection */
>> +#define		AT91_ADC_PRESCAL	(0xff << 8)	/* Prescalar Rate Selection */
>> +#define		AT91_ADC_PRESCAL_9260	(0x3f << 8)
>>   #define			AT91_ADC_PRESCAL_(x)	((x) << 8)
>> -#define		AT91_ADC_STARTUP	(0x1f << 16)	/* Startup Up Time */
>> +#define		AT91_ADC_STARTUP	(0xf << 16)	/* Startup Up Time */
>> +#define		AT91_ADC_STARTUP_9260	(0x1f << 16)
>> +#define		AT91_ADC_STARTUP_9G45	(0x7f << 16)
>>   #define			AT91_ADC_STARTUP_(x)	((x) << 16)
>>   #define		AT91_ADC_SHTIM		(0xf  << 24)	/* Sample & Hold Time */
>>   #define			AT91_ADC_SHTIM_(x)	((x) << 24)
>> @@ -58,4 +61,6 @@
>>   #define AT91_ADC_CHR(n)		(0x30 + ((n) * 4))	/* Channel Data Register N */
>>   #define		AT91_ADC_DATA		(0x3ff)
>>   
>> +#define AT91_ADC_VERSION	0xFC
>> +
>>   #endif
>> diff --git a/drivers/iio/adc/at91_adc.c b/drivers/iio/adc/at91_adc.c
>> index 18bd54f..14e99ba 100644
>> --- a/drivers/iio/adc/at91_adc.c
>> +++ b/drivers/iio/adc/at91_adc.c
>> @@ -39,6 +39,12 @@
>>   #define at91_adc_writel(st, reg, val) \
>>   	(writel_relaxed(val, st->reg_base + reg))
>>   
>> +struct at91_adc_caps {
>> +	bool	has_tsmr;	/* only at91sam9x5, sama5d3 have TSMR reg */
>> +	u32	mr_prescal_mask;
>> +	u32	mr_startup_mask;
>> +};
>> +
>>   struct at91_adc_state {
>>   	struct clk		*adc_clk;
>>   	u16			*buffer;
>> @@ -62,6 +68,7 @@ struct at91_adc_state {
>>   	u32			res;		/* resolution used for convertions */
>>   	bool			low_res;	/* the resolution corresponds to the lowest one */
>>   	wait_queue_head_t	wq_data_avail;
>> +	struct at91_adc_caps	caps;
>>   };
>>   
>>   static irqreturn_t at91_adc_trigger_handler(int irq, void *p)
>> @@ -580,6 +587,41 @@ static const struct iio_info at91_adc_info = {
>>   	.read_raw = &at91_adc_read_raw,
>>   };
>>   
>> +/*
>> + * Since atmel adc support different ip for touchscreen mode. Through the
>> + * IP check, we will know the touchscreen capbilities.
>> + */
>> +static void atmel_adc_get_cap(struct at91_adc_state *st)
>> +{
>> +	unsigned int version;
>> +	struct iio_dev *idev = iio_priv_to_dev(st);
>> +
>> +	version = at91_adc_readl(st, AT91_ADC_VERSION);
>> +	dev_dbg(&idev->dev, "version: 0x%x\n", version);
>> +
>> +	st->caps.mr_prescal_mask = AT91_ADC_PRESCAL_9260;
>> +	st->caps.mr_startup_mask = AT91_ADC_STARTUP_9260;
>> +
>> +	/* keep only major version number */
>> +	switch (version & 0xf00) {
>> +	case 0x500:	/* SAMA5D3 */
>> +	case 0x400:	/* AT91SAM9X5/9N12 */
>> +		st->caps.has_tsmr = 1;
>> +		st->caps.mr_startup_mask = AT91_ADC_STARTUP;
>> +	case 0x200:	/* AT91SAM9M10/9G45 */
>> +		st->caps.mr_prescal_mask = AT91_ADC_PRESCAL;
>> +
>> +		if ((version & 0xf00) == 0x200)
>> +			st->caps.mr_startup_mask = AT91_ADC_STARTUP_9G45;
>> +	case 0x100:	/* AT91SAM9260/9G20 */
>> +		break;
>> +	default:
>> +		dev_warn(&idev->dev,
>> +				"Unmanaged adc version, use minimal capabilities\n");
>> +		break;
>> +	};
>> +}
> Why don't you use different compatible names and derive your
> capabilities from which compatible is declared.
>
> It seems safer.

Ok, that make sense. I will use compatible names for the capabilities in 
next version. Thanks.

> Maxime

Best Regards,
Josh Wu