From: grygorii.strashko@ti•com (Grygorii Strashko)
To: linux-arm-kernel@lists•infradead.org
Subject: [PATCH 1/4] pinctrl: Remove duplicate code in pinctrl_pm_select_state functions
Date: Tue, 16 Jul 2013 16:15:07 +0300 [thread overview]
Message-ID: <51E5475B.1050900@ti.com> (raw)
In-Reply-To: <20130716090529.5541.54331.stgit@localhost>
Hi Tony,
This patch causes boot failure when I've applied my patch
"[RFC] ARM: OMAP2+: omap_device: add pinctrl handling"
https://lkml.org/lkml/2013/6/21/309
on top of it:
[ 0.264007] L310 cache controller enabled
[ 0.268310] l2x0: 16 ways, CACHE_ID 0x410000c4, AUX_CTRL 0x7e470000,
Cache size: 1048576 B
[ 0.282440] CPU1: Booted secondary processor
[ 0.366760] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.367401] Brought up 2 CPUs
[ 0.380920] SMP: Total of 2 processors activated (2387.96 BogoMIPS).
[ 0.387573] CPU: All CPU(s) started in SVC mode.
[ 0.395324] devtmpfs: initialized
[ 0.468658] pinctrl core: initialized pinctrl subsystem
[ 0.477996] regulator-dummy: no parameters
[ 0.485412] NET: Registered protocol family 16
[ 0.499145] DMA: preallocated 256 KiB pool for atomic coherent
allocations
[ 0.573181] Unable to handle kernel NULL pointer dereference at
virtual address 00000008
[ 0.581573] pgd = c0004000
[ 0.584472] [00000008] *pgd=00000000
[ 0.588226] Internal error: Oops: 5 [#1] SMP ARM
[ 0.593078] Modules linked in:
[ 0.596313] CPU: 0 PID: 1 Comm: swapper/0 Not tainted
3.11.0-rc1-00005-g37e15e6-dirty #100
[ 0.604888] task: de07f3c0 ti: de080000 task.ti: de080000
[ 0.610565] PC is at pinctrl_pm_select_active_state+0x4/0xc
[ 0.616394] LR is at _od_runtime_resume+0xc/0x20
[ 0.621215] pc : [<c02d4e2c>] lr : [<c002e930>] psr: 60000193
[ 0.621215] sp : de081cc0 ip : 60000193 fp : 00000000
[ 0.633209] r10: de080000 r9 : c0067e90 r8 : 00000004
[ 0.638671] r7 : c07800c0 r6 : c002e924 r5 : de0cf4a0 r4 : de0cf410
[ 0.645477] r3 : 00000000 r2 : 00000004 r1 : 00000470 r0 : de0cf410
[ 0.652282] Flags: nZCv IRQs off FIQs on Mode SVC_32 ISA ARM
Segment kernel
[ 0.660003] Control: 10c53c7d Table: 8000404a DAC: 00000017
[ 0.665985] Process swapper/0 (pid: 1, stack limit = 0xde080240)
[ 0.672241] Stack: (0xde081cc0 to 0xde082000)
[ 0.676818] 1cc0: de0cf410 c0335310 de0cf410 de0cb410 00000001
c0335374 de0cf410 de0cb410
[ 0.685333] 1ce0: 00000001 c033664c c0336b14 00000004 c1bbdedc
00000000 00000000 c0507c5c
[ 0.693847] 1d00: de0cf4a0 de0cf410 60000113 00000004 c1bbdedc
00000000 00000000 c0336b24
[ 0.702362] 1d20: de07f3c0 de11ea10 de0cf410 de0cf400 de0cd780
c02df144 de0cd740 00000000
[ 0.710845] 1d40: de0cf410 c0d6a634 de0cf410 00000000 00000000
c07efe7c 00000000 00000000
[ 0.719360] 1d60: 00000000 c032d794 c032d77c c032c554 de0cf410
c032c784 00000000 00000000
[ 0.727874] 1d80: c0d6a5f0 c032ac98 de07bed8 de0fd714 de0cf410
de0cf444 c07f65e8 c032c48c
[ 0.736389] 1da0: de0cf410 de0cf410 c07f65e8 c032b[RFC] ARM: OMAP2+:
omap_device: add pinctrl handlinga94 de0cf410 de0cf418 de0cb410 c0329ef8
[ 0.744873] 1dc0: 4a3101ff 00000000 00000200 00000000 00000000
00000000 c076f630 00000000
[ 0.753387] 1de0: de0cf400 00000000 de0cb410 c076f630 de0cb410
00000000 00000000 c042c2dc
[ 0.761901] 1e00: de0cb410 c1bbdedc 00000000 00000000 00000001
c042c3dc 00000001 c076f630
[ 0.770385] 1e20: 00000000 de0cb410 00000000 c0099068 60000113
c080b22c c1bbdd98 00000001
[ 0.778900] 1e40: c076f630 c1bbcaec 00000000 c1bbdedc 00000001
c076f630 00000000 de0cb410
[ 0.787414] 1e60: 00000000 c042c440 00000001 c076f630 00000000
00000001 00000000 c0099068
[ 0.795928] 1e80: 60000113 c080b22c 00000000 00000000 c076f630
c1bbcaec c1bbc09c 00000000
[ 0.804412] 1ea0: 00000000 c076f630 00000000 00000001 00000000
c042c4e4 00000001 c072c37c
[ 0.812927] 1ec0: c07221e0 de080000 c0762648 00000000 000000a4
c077979c c071f1c8 c0730a6c
[ 0.821441] 1ee0: c0760aec c07221fc 00000000 c0008978 00000083
de07f3c0 60000193 00000000
[ 0.829925] 1f00: 00000006 c07dbcd4 c07dbcd4 60000113 c02bf100
00000000 c07dbcd0 c07dbcd0
[ 0.838439] 1f20: 00000000 c0507c5c 00000002 de080000 c06f1920
c1bc531d 000000a4 c00655ec
[ 0.846954] 1f40: c06b2bd8 c06f0ee0 00000003 00000003 60000113
c0762668 00000003 c0762648
[ 0.855468] 1f60: c0817500 000000a4 c077979c c071f1c8 00000000
c071f91c 00000003 00000003
[ 0.863952] 1f80: c071f1c8 00000000 00000000 c04fd9ac 00000000
00000000 00000000 00000000
[ 0.872467] 1fa0: 00000000 c04fd9b4 00000000 c0013ac8 00000000
00000000 00000000 00000000
[ 0.880981] 1fc0: 00000000 00000000 00000000 00000000 00000000
00000000 00000000 00000000
[ 0.889465] 1fe0: 00000000 00000000 00000000 00000000 00000013
00000000 ce5331ac 3153ceac
[ 0.898010] [<c02d4e2c>] (pinctrl_pm_select_active_state+0x4/0xc)
from [<c002e930>] (_od_runtime_resume+0xc/0x20)
[ 0.908660] [<c002e930>] (_od_runtime_resume+0xc/0x20) from
[<c0335310>] (__rpm_callback+0x34/0x70)
[ 0.918060] [<c0335310>] (__rpm_callback+0x34/0x70) from [<c0335374>]
(rpm_callback+0x28/0x88)
[ 0.927032] [<c0335374>] (rpm_callback+0x28/0x88) from [<c033664c>]
(rpm_resume+0x3c8/0x624)
[ 0.935821] [<c033664c>] (rpm_resume+0x3c8/0x624) from [<c0336b24>]
(__pm_runtime_resume+0x48/0x60)
[ 0.945220] [<c0336b24>] (__pm_runtime_resume+0x48/0x60) from
[<c02df144>] (omap_gpio_probe+0x254/0x6c0)
[ 0.955078] [<c02df144>] (omap_gpio_probe+0x254/0x6c0) from
[<c032d794>] (platform_drv_probe+0x18/0x1c)
[ 0.964843] [<c032d794>] (platform_drv_probe+0x18/0x1c) from
[<c032c554>] (driver_probe_device+0x88/0x220)
[ 0.974884] [<c032c554>] (driver_probe_device+0x88/0x220) from
[<c032ac98>] (bus_for_each_drv+0x5c/0x88)
[ 0.984710] [<c032ac98>] (bus_for_each_drv+0x5c/0x88) from
[<c032c48c>] (device_attach+0x80/0xa4)
[ 0.993957] [<c032c48c>] (device_attach+0x80/0xa4) from [<c032ba94>]
(bus_probe_device+0x88/0xac)
[ 1.003173] [<c032ba94>] (bus_probe_device+0x88/0xac) from
[<c0329ef8>] (device_add+0x418/0x61c)
[ 1.012329] [<c0329ef8>] (device_add+0x418/0x61c) from [<c042c2dc>]
(of_platform_device_create_pdata+0x5c/0x80)
[ 1.022796] [<c042c2dc>] (of_platform_device_create_pdata+0x5c/0x80)
from [<c042c3dc>] (of_platform_bus_create+0xdc/0x184)
[ 1.034271] [<c042c3dc>] (of_platform_bus_create+0xdc/0x184) from
[<c042c440>] (of_platform_bus_create+0x140/0x184)
[ 1.045104] [<c042c440>] (of_platform_bus_create+0x140/0x184) from
[<c042c4e4>] (of_platform_populate+0x60/0x98)
[ 1.055664] [<c042c4e4>] (of_platform_populate+0x60/0x98) from
[<c0730a6c>] (omap_generic_init+0x24/0x60)
[ 1.065612] [<c0730a6c>] (omap_generic_init+0x24/0x60) from
[<c07221fc>] (customize_machine+0x1c/0x40)
[ 1.075286] [<c07221fc>] (customize_machine+0x1c/0x40) from
[<c0008978>] (do_one_initcall+0xe4/0x148)
[ 1.084869] [<c0008978>] (do_one_initcall+0xe4/0x148) from
[<c071f91c>] (kernel_init_freeable+0xfc/0x1c8)
[ 1.094818] [<c071f91c>] (kernel_init_freeable+0xfc/0x1c8) from
[<c04fd9b4>] (kernel_init+0x8/0xe4)
[ 1.104248] [<c04fd9b4>] (kernel_init+0x8/0xe4) from [<c0013ac8>]
(ret_from_fork+0x14/0x2c)
[ 1.112915] Code: e59031b4 e593100c eaffffde e59031b4 (e5931008)
[ 1.119323] ---[ end trace fd7907bbe82cc699 ]---
[ 1.124206] Kernel panic - not syncing: Attempted to kill init!
exitcode=0x0000000b
[ 1.124206]
[ 1.133789] CPU1: stopping
[ 1.136657] CPU: 1 PID: 0 Comm: swapper/1 Tainted: G D
3.11.0-rc1-00005-g37e15e6-dirty #100
[ 1.146270] [<c001b62c>] (unwind_backtrace+0x0/0xf0) from
[<c00177fc>] (show_stack+0x10/0x14)
[ 1.155151] [<c00177fc>] (show_stack+0x10/0x14) from [<c05027cc>]
(dump_stack+0x70/0x8c)
[ 1.163574] [<c05027cc>] (dump_stack+0x70/0x8c) from [<c0019384>]
(handle_IPI+0x130/0x158)
[ 1.172180] [<c0019384>] (handle_IPI+0x130/0x158) from [<c0008760>]
(gic_handle_irq+0x54/0x5c)
[ 1.181121] [<c0008760>] (gic_handle_irq+0x54/0x5c) from [<c0508624>]
(__irq_svc+0x44/0x5c)
[ 1.189819] Exception stack(0xde0a7f90 to 0xde0a7fd8)
[ 1.195098] 7f80: c0014ca8
000002da 00000000 00000000
[ 1.203613] 7fa0: de0a6000 00000000 10c03c7d c0817774 c0514820
c0815e40 c07869a8 00000000
[ 1.212097] 7fc0: 01000000 de0a7fd8 c0014ca8 c0014cac 60000113 ffffffff
[ 1.219024] [<c0508624>] (__irq_svc+0x44/0x5c) from [<c0014cac>]
(arch_cpu_idle+0x38/0x44)
[ 1.227630] [<c0014cac>] (arch_cpu_idle+0x38/0x44) from [<c00875d4>]
(cpu_startup_entry+0xa8/0x228)
[ 1.237030] [<c00875d4>] (cpu_startup_entry+0xa8/0x228) from
[<80008264>] (0x80008264)
On 07/16/2013 12:05 PM, Tony Lindgren wrote:
> There's no need to duplicate essentially the same functions. Let's
> introduce static int pinctrl_pm_select_state() and make the other
> related functions call that.
>
> This allows us to add support later on for multiple active states,
> and more optimized dynamic remuxing.
>
> Note that we still need to export the various pinctrl_pm_select
> functions as we want to keep struct pinctrl_state private to the
> pinctrl code, and cannot replace those with inline functions.
>
> Cc: Stephen Warren <swarren@wwwdotorg•org>
> Signed-off-by: Tony Lindgren <tony@atomide•com>
> ---
> drivers/pinctrl/core.c | 47 +++++++++++++++++++----------------------------
> 1 file changed, 19 insertions(+), 28 deletions(-)
>
> diff --git a/drivers/pinctrl/core.c b/drivers/pinctrl/core.c
> index 5b272bf..bda2c61 100644
> --- a/drivers/pinctrl/core.c
> +++ b/drivers/pinctrl/core.c
> @@ -1227,23 +1227,34 @@ EXPORT_SYMBOL_GPL(pinctrl_force_default);
> #ifdef CONFIG_PM
>
> /**
> - * pinctrl_pm_select_default_state() - select default pinctrl state for PM
> + * pinctrl_pm_select_state() - select pinctrl state for PM
> * @dev: device to select default state for
> + * @state: state to set
> */
> -int pinctrl_pm_select_default_state(struct device *dev)
> +static int pinctrl_pm_select_state(struct device *dev, struct pinctrl_state *state)
> {
> struct dev_pin_info *pins = dev->pins;
> int ret;
>
> if (!pins)
> return 0;
> - if (IS_ERR(pins->default_state))
> - return 0; /* No default state */
> - ret = pinctrl_select_state(pins->p, pins->default_state);
> + if (IS_ERR(state))
> + return 0; /* No such state */
> + ret = pinctrl_select_state(pins->p, state);
> if (ret)
> - dev_err(dev, "failed to activate default pinctrl state\n");
> + dev_err(dev, "failed to activate pinctrl state %s\n",
> + state->name);
> return ret;
> }
> +
> +/**
> + * pinctrl_pm_select_default_state() - select default pinctrl state for PM
> + * @dev: device to select default state for
> + */
> +int pinctrl_pm_select_default_state(struct device *dev)
> +{
Seems, need to keep check for !dev->pins here
if (!dev->pins)
return 0;
> + return pinctrl_pm_select_state(dev, dev->pins->default_state);
> +}
> EXPORT_SYMBOL_GPL(pinctrl_pm_select_default_state);
>
> /**
> @@ -1252,17 +1263,7 @@ EXPORT_SYMBOL_GPL(pinctrl_pm_select_default_state);
> */
> int pinctrl_pm_select_sleep_state(struct device *dev)
> {
> - struct dev_pin_info *pins = dev->pins;
> - int ret;
> -
> - if (!pins)
> - return 0;
> - if (IS_ERR(pins->sleep_state))
> - return 0; /* No sleep state */
> - ret = pinctrl_select_state(pins->p, pins->sleep_state);
> - if (ret)
> - dev_err(dev, "failed to activate pinctrl sleep state\n");
> - return ret;
here
if (!dev->pins)
return 0;
> + return pinctrl_pm_select_state(dev, dev->pins->sleep_state);
> }
> EXPORT_SYMBOL_GPL(pinctrl_pm_select_sleep_state);
>
> @@ -1272,17 +1273,7 @@ EXPORT_SYMBOL_GPL(pinctrl_pm_select_sleep_state);
> */
> int pinctrl_pm_select_idle_state(struct device *dev)
> {
> - struct dev_pin_info *pins = dev->pins;
> - int ret;
> -
> - if (!pins)
> - return 0;
> - if (IS_ERR(pins->idle_state))
> - return 0; /* No idle state */
> - ret = pinctrl_select_state(pins->p, pins->idle_state);
> - if (ret)
> - dev_err(dev, "failed to activate pinctrl idle state\n");
> - return ret;
here
if (!dev->pins)
return 0;
> + return pinctrl_pm_select_state(dev, dev->pins->idle_state);
> }
> EXPORT_SYMBOL_GPL(pinctrl_pm_select_idle_state);
> #endif
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
next prev parent reply other threads:[~2013-07-16 13:15 UTC|newest]
Thread overview: 41+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-07-16 9:05 [PATCH 0/4] improved support for runtime muxing for pinctrl Tony Lindgren
2013-07-16 9:05 ` [PATCH 1/4] pinctrl: Remove duplicate code in pinctrl_pm_select_state functions Tony Lindgren
2013-07-16 13:15 ` Grygorii Strashko [this message]
2013-07-16 13:41 ` Tony Lindgren
2013-07-16 14:25 ` Grygorii Strashko
2013-07-17 6:31 ` Tony Lindgren
2013-07-16 9:05 ` [PATCH 2/4] pinctrl: Allow pinctrl to have multiple active states Tony Lindgren
2013-07-17 20:55 ` Stephen Warren
2013-07-16 9:05 ` [PATCH 3/4] pinctrl: Add support for additional dynamic states Tony Lindgren
2013-07-16 9:35 ` Felipe Balbi
2013-07-16 12:06 ` Tony Lindgren
2013-07-17 21:14 ` Stephen Warren
2013-07-18 7:25 ` Tony Lindgren
2013-07-18 10:53 ` Tony Lindgren
2013-07-18 19:21 ` Stephen Warren
2013-07-19 7:29 ` Tony Lindgren
2013-07-19 18:52 ` Stephen Warren
2013-07-29 9:05 ` Tony Lindgren
2013-07-29 22:01 ` Stephen Warren
2013-08-14 16:41 ` Linus Walleij
2013-07-17 21:23 ` Stephen Warren
2013-07-18 7:36 ` Tony Lindgren
2013-07-18 19:26 ` Stephen Warren
2013-07-19 7:39 ` Tony Lindgren
2013-07-19 10:29 ` Grygorii Strashko
2013-07-19 19:03 ` Stephen Warren
2013-07-22 23:15 ` Linus Walleij
2013-07-29 9:08 ` Tony Lindgren
2013-07-19 18:58 ` Stephen Warren
2013-07-29 9:21 ` Tony Lindgren
2013-07-29 22:08 ` Stephen Warren
2013-07-22 23:07 ` Linus Walleij
2013-07-29 9:31 ` Tony Lindgren
2013-07-16 9:05 ` [PATCH 4/4] drivers: Add pinctrl handling for dynamic pin states Tony Lindgren
2013-07-17 21:21 ` Stephen Warren
2013-07-18 7:50 ` Tony Lindgren
2013-07-18 13:48 ` Tony Lindgren
2013-07-16 9:14 ` [PATCH 0/4] improved support for runtime muxing for pinctrl Tony Lindgren
2013-07-17 11:49 ` Grygorii Strashko
-- strict thread matches above, loose matches on Subject: below --
2013-07-18 15:15 [PATCHv2 " Tony Lindgren
2013-07-18 15:15 ` [PATCH 1/4] pinctrl: Remove duplicate code in pinctrl_pm_select_state functions Tony Lindgren
2013-07-22 22:43 ` Linus Walleij
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=51E5475B.1050900@ti.com \
--to=grygorii.strashko@ti$(echo .)com \
--cc=linux-arm-kernel@lists$(echo .)infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox