[PATCH 4/5] iio: at91: add an optional dt property for for adc clock hz.

From: b.brezillon@overkiz•com (boris brezillon)
To: linux-arm-kernel@lists•infradead.org
Subject: [PATCH 4/5] iio: at91: add an optional dt property for for adc clock hz.
Date: Thu, 25 Jul 2013 14:11:38 +0200	[thread overview]
Message-ID: <51F115FA.1040801@overkiz.com> (raw)
In-Reply-To: <51F11395.9040406@overkiz.com>

On 25/07/2013 14:01, boris brezillon wrote:
> Hi Josh,
>
> On 14/07/2013 10:04, Josh Wu wrote:
>> Signed-off-by: Josh Wu <josh.wu@atmel•com>
>> ---
>>   Documentation/devicetree/bindings/arm/atmel-adc.txt |    2 ++
>>   drivers/iio/adc/at91_adc.c                          |    8 +++++++-
>>   2 files changed, 9 insertions(+), 1 deletion(-)
>>
>> diff --git a/Documentation/devicetree/bindings/arm/atmel-adc.txt
>> b/Documentation/devicetree/bindings/arm/atmel-adc.txt
>> index 16769d9..0db2945 100644
>> --- a/Documentation/devicetree/bindings/arm/atmel-adc.txt
>> +++ b/Documentation/devicetree/bindings/arm/atmel-adc.txt
>> @@ -27,6 +27,8 @@ Optional properties:
>>                  resolution will be used.
>>     - atmel,adc-sleep-mode: Boolean to enable sleep mode when no
>> conversion
>>     - atmel,adc-sample-hold-time: Sample and Hold Time in microseconds
>> +  - atmel,adc-clock-rate: ADC clock rate. If not specified, use the
>> default
>> +              adc_op_clk.
>>
>>   Optional trigger Nodes:
>>     - Required properties:
>> diff --git a/drivers/iio/adc/at91_adc.c b/drivers/iio/adc/at91_adc.c
>> index e93a075..8f1386f 100644
>> --- a/drivers/iio/adc/at91_adc.c
>> +++ b/drivers/iio/adc/at91_adc.c
>> @@ -47,6 +47,7 @@ struct at91_adc_caps {
>>
>>   struct at91_adc_state {
>>       struct clk        *adc_clk;
>> +    u32            adc_clk_rate;
>>       u16            *buffer;
>>       unsigned long        channels_mask;
>>       struct clk        *clk;
>> @@ -448,6 +449,10 @@ static int at91_adc_probe_dt(struct
>> at91_adc_state *st,
>>       if (!node)
>>           return -EINVAL;
>>
>> +    prop = 0;
>> +    of_property_read_u32(node, "atmel,adc-clock-rate", &prop);
>> +    st->adc_clk_rate = prop;
>> +
>>       st->use_external = of_property_read_bool(node,
>> "atmel,adc-use-external-triggers");
>>
>>       if (of_property_read_u32(node, "atmel,adc-channels-used", &prop)) {
>> @@ -723,7 +728,8 @@ static int at91_adc_probe(struct platform_device
>> *pdev)
>>        * specified by the electrical characteristics of the board.
>>        */
>>       mstrclk = clk_get_rate(st->clk);
>> -    adc_clk = clk_get_rate(st->adc_clk);
>> +    adc_clk = st->adc_clk_rate ?
>> +        st->adc_clk_rate : clk_get_rate(st->adc_clk);
>>       adc_clk_khz = adc_clk / 1000;
>>       prsc = (mstrclk / (2 * adc_clk)) - 1;
>>
>>
>
> As said by Maxime and Lars-Peter, I think this should be handled by a
> proper clock implementation (adc_clock ?) using common clock framework.
>
> IMO the fake adc_op_clk should not exist. Instead the adc clock binding
> should define properties describing the adc clock characteristics (see
> pll implementation in at91 common clk series).
> These characteristics can be found in 'ADC characteristics' chapter in
> atmel's datasheets.
>
> The adc clock binding would look like this (based on sama5 datasheet):
>
> adc_clk {
>      compatible = "sama5d3-adc-clk";
>      output = <1000000 20000000>; /* output clock frequency range */
> };

or more like this:

adc_clk {
	compatible = "xxx-adc-clk";
	#clock-cells = <0>;
	clocks = <&mck>;
	output = <1000000 20000000>; /* output clock frequency range */
};
>
> It is up to the clk user (adc driver) to choose the appropriate
> frequency to use (maximum rate ?) and configure it with clk_set_rate
> function.
> The adc clk implem will take care of PRESCAL field config in ADC_MR
> according to parent rate (mck rate) and requested rate. It will also
> check if the requested rate is in the output clk range.
>
> These are just thought, feel free to comment it.
>
> Best Regards,
>
> Boris
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel