From: richard.genoud@gmail•com (Richard Genoud)
To: linux-arm-kernel@lists•infradead.org
Subject: [PATCH v2 00/42] ARM: at91: move to common clk framework
Date: Fri, 26 Jul 2013 16:10:56 +0200 [thread overview]
Message-ID: <51F28370.6050304@gmail.com> (raw)
In-Reply-To: <1374068069-13496-1-git-send-email-b.brezillon@overkiz.com>
On 17/07/2013 15:34, Boris BREZILLON wrote:
> Hello,
>
> This patch series is a proposal to move at91 clock implementation
> to common clk framework.
>
> Most of the clock provided by the PMC (Power Management Controller) are
> implemented :
> - main clock (main oscillator)
> - pll clocks
> - master clock
> - programmable clocks
> - utmi clock
> - peripheral clocks
> - system clocks
>
> This implementation is compatible with device tree: the goal is
> to define the whole clock tree in the device tree (all currently
> available dt SoCs and boards are patched to support dt clocks).
> Please feel free to comment the dt bindinds.
>
> I removed the register_clocks function in SoC supporting dt boards only:
> - at91sam9x5 SoCs
> - at91sam9n12 SoC
> - sama5d3 SoCs
>
> This patch series is based on linux-next and has been tested on sama5d31ek
> board using device tree. It compiles for other SoCs and both with and without
> dt support, but it has not been tested.
>
> BTW could other people test it on other boards (I only have a kizbox and
> a sama5d31ek dev kit).
>
> Best Regards,
> Boris
>
> Changes since v1:
> - fix bugs in pll, programmable and system clock implementations
> (wrong bit position).
> - add usb clock configuration support (ohci and udc drivers +
> clk_lookup for non dt boards)
> - rework of the system clock interfaces (no need to define a parent clock,
> system clock is a gate with no rate info)
> - change system, peripheral and programmable clk dt bindings (1 master node
> and multiple child nodes each defining a system/peripheral or prog clock)
> - fix bugs in sama5 dt definition
>
Hi Boris,
First of all: Big thumbs up for this work !
Then, I tested the serie on at91sam9g35ek (sam9x5 familly), and I see some problems:
kernel is next-20130725 with the v4 serie of "ARM: at91: prepare transition to common clk framework"
and v2 serie of "ARM: at91: move to common clk framework"
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 3.11.0-rc2-next-20130725+ (rgenoud at lnx-rg) (gcc version 4.7.3 (Buildroot 2013.05-00157-g6d1e60b-dirty) ) #61 Fri Jul 26 15:30:13 CEST 2013
[ 0.000000] CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177
[ 0.000000] CPU: VIVT data cache, VIVT instruction cache
[ 0.000000] Machine: Atmel AT91SAM (Device Tree), model: Atmel AT91SAM9G35-EK
[ 0.000000] bootconsole [earlycon0] enabled
[ 0.000000] Memory policy: ECC disabled, Data cache writeback
[ 0.000000] AT91: Detected soc type: at91sam9x5
[ 0.000000] AT91: Detected soc subtype: at91sam9g35
[ 0.000000] AT91: sram at 0x300000 of 0x8000 mapped at 0xfef70000
[ 0.000000] On node 0 totalpages: 32768
[ 0.000000] free_area_init_node: node 0, pgdat c039d208, node_mem_map c03b5000
[ 0.000000] Normal zone: 256 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 32768 pages, LIFO batch:7
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512
[ 0.000000] Kernel command line: console=ttyS0,115200 loglevel=8 ip=dhcp root=/dev/nfs nfsroot=10.128.0.9:/nfsroot,v3 rw earlyprintk
[ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.000000] Memory: 126044K/131072K available (2804K kernel code, 126K rwdata, 592K rodata, 141K init, 93K bss, 5028K reserved)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xc8800000 - 0xff000000 ( 872 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xc8000000 ( 128 MB)
[ 0.000000] .text : 0xc0008000 - 0xc0359550 (3398 kB)
[ 0.000000] .init : 0xc035a000 - 0xc037d61c ( 142 kB)
[ 0.000000] .data : 0xc037e000 - 0xc039d920 ( 127 kB)
[ 0.000000] .bss : 0xc039d920 - 0xc03b4ff4 ( 94 kB)
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] AT91: PIT: mck rate = 0
[ 0.000000] ------------[ cut here ]------------
[ 0.000000] WARNING: CPU: 0 PID: 0 at arch/arm/mach-at91/at91sam926x_time.c:259 at91sam926x_pit_init+0x114/0x234()
[ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 3.11.0-rc2-next-20130725+ #61
[ 0.000000] [<c000ca18>] (unwind_backtrace+0x0/0xe0) from [<c000b0f0>] (show_stack+0x10/0x14)
[ 0.000000] [<c000b0f0>] (show_stack+0x10/0x14) from [<c00144e0>] (warn_slowpath_common+0x5c/0x7c)
[ 0.000000] [<c00144e0>] (warn_slowpath_common+0x5c/0x7c) from [<c00145b8>] (warn_slowpath_null+0x18/0x1c)
[ 0.000000] [<c00145b8>] (warn_slowpath_null+0x18/0x1c) from [<c03607b0>] (at91sam926x_pit_init+0x114/0x234)
[ 0.000000] [<c03607b0>] (at91sam926x_pit_init+0x114/0x234) from [<c035ca4c>] (time_init+0x1c/0x24)
[ 0.000000] [<c035ca4c>] (time_init+0x1c/0x24) from [<c035a650>] (start_kernel+0x19c/0x2f4)
[ 0.000000] [<c035a650>] (start_kernel+0x19c/0x2f4) from [<20008040>] (0x20008040)
[ 0.000000] ---[ end trace 1b75b31a2719ed1c ]---
[ 0.000000] Division by zero in kernel.
[ 0.000000] CPU: 0 PID: 0 Comm: swapper Tainted: G W 3.11.0-rc2-next-20130725+ #61
[ 0.000000] [<c000ca18>] (unwind_backtrace+0x0/0xe0) from [<c000b0f0>] (show_stack+0x10/0x14)
[ 0.000000] [<c000b0f0>] (show_stack+0x10/0x14) from [<c013f0a0>] (Ldiv0_64+0x8/0x18)
[ 0.000000] [<c013f0a0>] (Ldiv0_64+0x8/0x18) from [<c003b864>] (__clocksource_updatefreq_scale+0x30/0x104)
[ 0.000000] [<c003b864>] (__clocksource_updatefreq_scale+0x30/0x104) from [<c003b944>] (__clocksource_register_scale+0xc/0x48)
[ 0.000000] [<c003b944>] (__clocksource_register_scale+0xc/0x48) from [<c0360810>] (at91sam926x_pit_init+0x174/0x234)
[ 0.000000] [<c0360810>] (at91sam926x_pit_init+0x174/0x234) from [<c035ca4c>] (time_init+0x1c/0x24)
[ 0.000000] [<c035ca4c>] (time_init+0x1c/0x24) from [<c035a650>] (start_kernel+0x19c/0x2f4)
[ 0.000000] [<c035a650>] (start_kernel+0x19c/0x2f4) from [<20008040>] (0x20008040)
[ 0.000000] Division by zero in kernel.
[ 0.000000] CPU: 0 PID: 0 Comm: swapper Tainted: G W 3.11.0-rc2-next-20130725+ #61
[ 0.000000] [<c000ca18>] (unwind_backtrace+0x0/0xe0) from [<c000b0f0>] (show_stack+0x10/0x14)
[ 0.000000] [<c000b0f0>] (show_stack+0x10/0x14) from [<c013f0a0>] (Ldiv0_64+0x8/0x18)
[ 0.000000] [<c013f0a0>] (Ldiv0_64+0x8/0x18) from [<c003b76c>] (clocks_calc_mult_shift+0x70/0xa4)
[ 0.000000] [<c003b76c>] (clocks_calc_mult_shift+0x70/0xa4) from [<c003b8e4>] (__clocksource_updatefreq_scale+0xb0/0x104)
[ 0.000000] [<c003b8e4>] (__clocksource_updatefreq_scale+0xb0/0x104) from [<c003b944>] (__clocksource_register_scale+0xc/0x48)
[ 0.000000] [<c003b944>] (__clocksource_register_scale+0xc/0x48) from [<c0360810>] (at91sam926x_pit_init+0x174/0x234)
[ 0.000000] [<c0360810>] (at91sam926x_pit_init+0x174/0x234) from [<c035ca4c>] (time_init+0x1c/0x24)
[ 0.000000] [<c035ca4c>] (time_init+0x1c/0x24) from [<c035a650>] (start_kernel+0x19c/0x2f4)
[ 0.000000] [<c035a650>] (start_kernel+0x19c/0x2f4) from [<20008040>] (0x20008040)
[...]
Best regards,
Richard
next prev parent reply other threads:[~2013-07-26 14:10 UTC|newest]
Thread overview: 64+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-07-17 13:34 [PATCH v2 00/42] ARM: at91: move to common clk framework Boris BREZILLON
2013-07-17 13:37 ` [PATCH v2 01/42] ARM: at91: move at91_pmc.h to include/linux/clk/at91.h Boris BREZILLON
2013-07-23 18:03 ` Jean-Christophe PLAGNIOL-VILLARD
2013-07-23 22:24 ` boris brezillon
2013-07-17 13:40 ` [PATCH v2 02/42] ARM: at91: add PMC main clock Boris BREZILLON
2013-07-17 16:39 ` boris brezillon
2013-07-26 16:41 ` boris brezillon
2013-07-17 13:42 ` [PATCH v2 03/42] ARM: at91: add PMC pll clocks Boris BREZILLON
2013-07-17 13:44 ` [PATCH v2 04/42] ARM: at91: add PMC master clock Boris BREZILLON
2013-07-17 13:45 ` [PATCH v2 05/42] ARM: at91: add PMC system clocks Boris BREZILLON
2013-07-17 13:46 ` [PATCH v2 06/42] ARM: at91: add PMC peripheral clocks Boris BREZILLON
2013-07-17 13:47 ` [PATCH v2 07/42] ARM: at91: add PMC programmable clocks Boris BREZILLON
2013-07-17 13:50 ` [PATCH v2 08/42] ARM: at91: add PMC utmi clock Boris BREZILLON
2013-07-17 13:52 ` [PATCH v2 09/42] ARM: at91: add PMC usb clock Boris BREZILLON
2013-07-17 13:53 ` [PATCH v2 10/42] ARM: at91: add PMC smd clock Boris BREZILLON
2013-07-17 13:55 ` [PATCH v2 11/42] ARM: at91: add PMC clk device tree binding doc Boris BREZILLON
2013-07-17 14:35 ` [PATCH v2 12/42] ARM: at91: move to common clk framework Boris BREZILLON
2013-07-17 14:41 ` [PATCH v2 13/42] ARM: at91: move at91rm9200 SoC to new at91 clk implem Boris BREZILLON
2013-07-17 14:42 ` [PATCH v2 14/42] ARM: at91: move at91sam9260 " Boris BREZILLON
2013-07-17 14:44 ` [PATCH v2 15/42] ARM: at91: move at91sam9261 " Boris BREZILLON
2013-07-17 14:45 ` [PATCH v2 16/42] ARM: at91: move at91sam9263 " Boris BREZILLON
2013-07-17 14:49 ` [PATCH v2 17/42] ARM: at91: move at91sam9g45 " Boris BREZILLON
2013-07-23 22:29 ` boris brezillon
2013-07-17 14:49 ` [PATCH v2 18/42] ARM: at91: move at91sam9n12 " Boris BREZILLON
2013-07-17 14:52 ` [PATCH v2 19/42] ARM: at91: move at91sam9rl " Boris BREZILLON
2013-07-17 14:53 ` [PATCH v2 20/42] ARM: at91: move at91sam9x5 SoCs " Boris BREZILLON
2013-07-17 14:59 ` [PATCH v2 21/42] ARM: at91: move at91sam9 " Boris BREZILLON
2013-07-17 14:59 ` [PATCH v2 22/42] ARM: at91: move sama5d3 " Boris BREZILLON
2013-07-17 15:00 ` [PATCH v2 23/42] ARM: at91: move at91rm9200 boards " Boris BREZILLON
2013-07-17 15:37 ` [PATCH v2 24/42] ARM: at91: move at91sam9 " Boris BREZILLON
2013-07-17 17:13 ` Russell King - ARM Linux
2013-07-17 20:32 ` boris brezillon
2013-07-17 15:46 ` [PATCH v2 25/42] ARM: at91: move pit timer to common clk framework Boris BREZILLON
2013-07-17 15:47 ` [PATCH v2 26/42] USB: ohci-at91: add usb_clk for transition " Boris BREZILLON
2013-07-31 7:56 ` boris brezillon
2013-07-31 14:32 ` Alan Stern
2013-07-17 15:49 ` [PATCH v2 27/42] usb: gadget: at91_udc: " Boris BREZILLON
2013-07-17 15:51 ` [PATCH v2 28/42] ARM: at91/dt: move at91rm9200 SoC to new at91 clk implem Boris BREZILLON
2013-07-17 15:53 ` [PATCH v2 29/42] ARM: at91/dt: move at91sam9260 " Boris BREZILLON
2013-07-17 15:55 ` [PATCH v2 30/42] ARM: at91/dt: move at91sam9263 " Boris BREZILLON
2013-07-17 16:00 ` [PATCH v2 31/42] ARM: at91/dt: move at91sam9g45 " Boris BREZILLON
2013-07-17 16:02 ` [PATCH v2 32/42] ARM: at91/dt: move at91sam9n12 " Boris BREZILLON
2013-07-17 16:05 ` [PATCH v2 33/42] ARM: at91/dt: move at91sam9x5 SoCs " Boris BREZILLON
2013-07-17 16:45 ` [PATCH v2 34/42] ARM: at91/dt: move at91sam9g20 SoC " Boris BREZILLON
2013-07-17 16:50 ` [PATCH v2 35/42] ARM: at91/dt: move sama5d3 SoCs " Boris BREZILLON
2013-07-17 20:06 ` [PATCH v2 36/42] ARM: at91/dt: move sam9260/sam9g20 " Boris BREZILLON
2013-07-17 20:08 ` [PATCH v2 37/42] ARM: at91/dt: move rm9200 boards " Boris BREZILLON
2013-07-17 20:09 ` [PATCH v2 38/42] ARM: at91/dt: move sam9263 " Boris BREZILLON
2013-07-17 20:17 ` [PATCH v2 39/42] ARM: at91/dt: move sam9g45 " Boris BREZILLON
2013-07-17 20:19 ` [PATCH v2 40/42] ARM: at91/dt: move sam9n12 " Boris BREZILLON
2013-07-17 20:21 ` [PATCH v2 41/42] ARM: at91/dt: move sam9x5 " Boris BREZILLON
2013-07-17 20:32 ` [PATCH v2 42/42] ARM: at91/dt: move sama5d3 " Boris BREZILLON
2013-07-18 8:51 ` [PATCH v2 00/42] ARM: at91: move to common clk framework boris brezillon
2013-07-26 14:10 ` Richard Genoud [this message]
2013-07-26 15:44 ` boris brezillon
2013-07-26 16:35 ` boris brezillon
2013-07-29 8:00 ` Richard Genoud
2013-07-29 9:25 ` boris brezillon
2013-07-29 14:18 ` Richard Genoud
2013-07-29 14:34 ` boris brezillon
2013-07-29 15:09 ` Richard Genoud
2013-07-29 15:14 ` boris brezillon
2013-07-29 16:44 ` boris brezillon
2013-07-27 4:41 ` boris brezillon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=51F28370.6050304@gmail.com \
--to=richard.genoud@gmail$(echo .)com \
--cc=linux-arm-kernel@lists$(echo .)infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox