Subject: [PATCH] ARM: EXYNOS: cpuidle: Skip C1 cpuidle state for exynos5440

From: [email-masked] (Daniel Lezcano)
Date: Sun, 28 Jul 2013 12:31:51 +0200

On 07/28/2013 11:22 AM, Tomasz Figa wrote:
> On Sunday 28 of July 2013 09:10:09 Daniel Lezcano wrote:
>> On 07/24/2013 01:47 PM, Kukjin Kim wrote:
>>> Amit Daniel Kachhap wrote:
>>>> This patch skips the deep C1(AFTR -Arm off top running) state for
>>>> exynos5440
>>>> soc as this soc does not support this state. All the cpu's only
>>>> allows the basic
>>>> C0 state.
>>>>
>>>> Signed-off-by: Amit Daniel Kachhap <[email-masked]>
>>>> ---
>>>>
>>>>  arch/arm/mach-exynos/cpuidle.c |    2 +-
>>>>  1 files changed, 1 insertions(+), 1 deletions(-)
>>>>
>>>> diff --git a/arch/arm/mach-exynos/cpuidle.c b/arch/arm/mach-
>>>> exynos/cpuidle.c
>>>> index 17a18ff..9a776a1 100644
>>>> --- a/arch/arm/mach-exynos/cpuidle.c
>>>> +++ b/arch/arm/mach-exynos/cpuidle.c
>>>> @@ -210,7 +210,7 @@ static int __init exynos4_init_cpuidle(void)
>>>>
>>>>  		device->cpu = cpu_id;
>>>>  		
>>>>  		/* Support IDLE only */
>>>>
>>>> -		if (cpu_id != 0)
>>>> +		if (soc_is_exynos5440() || cpu_id != 0)
>>>>
>>>>  			device->state_count = 1;
>>>>  		
>>>>  		ret = cpuidle_register_device(device);
>>>>
>>>> --
>>>> 1.7.1
>>>
>>> Applied, thanks.
>>
>> You shouldn't have. This patch means exynos5540 has no cpuidle driver at
>> all. It should be fixed in the Kconfig to unselect CONFIG_CPU_IDLE for
>> an exynos5540.
> 
> To shed more light on this, let me add that you need to register a cpuidle 
> driver only if you have more states than a simple WFI or you need some 
> crazy steps to enter WFI. Default setup falls back to generic ARM WFI. 
> (Daniel, do we get the nice idle stats as provided by cpuidle core then?)

Nope, but with one state, idle vs busy stats do the trick.

BTW, I am writing a tool to do some stats based on the idle events [1].
It is still at a very early development stage but we can get some
interesting informations.

> Anyway, Exynos cpuidle is using an initcall to initialize and we support 
> multiple Exynos SoCs in single zImage, so deselecting CONFIG_CPU_IDLE is 
> not an option. 

Good point.

> Considering multiplatform requirements, the driver has to 
> be modified to initialize only on supported platforms, either by:
> 
>  a) dropping the initcall and calling the init function directly from 
> arch/arm/mach-exynos
> 
>  or
> 
>  b) checking if machine we are running on is supported, which would mean a 
> long list of all Exynos SoCs that needs to be checked.
> 
> An evolution of option a) is registering a platform device somewhere in 
> arch/arm/mach-exynos and making exynos-cpuidle a platform driver.

Yes, I am favorable to this solution [2].

> The 
> problem is that you must register a static platform device from arch code, 
> because cpuidle is not a real hardware block that can be put into device 
> tree.

Thanks
  -- Daniel

[1] https://git.linaro.org/gitweb?p=people/dlezcano/idlestat.git;a=summary
[2] http://patches.linaro.org/18368/

-- 
 <http://www.linaro.org/> Linaro.org ? Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog