From: t-kristo@ti•com (Tero Kristo)
To: linux-arm-kernel@lists•infradead.org
Subject: [PATCHv4 08/33] ARM: dts: omap4 clock data
Date: Wed, 31 Jul 2013 17:49:28 +0300 [thread overview]
Message-ID: <51F923F8.6080700@ti.com> (raw)
In-Reply-To: <51F813B3.7020000@ti.com>
On 07/30/2013 10:27 PM, Nishanth Menon wrote:
> On 07/23/2013 02:20 AM, Tero Kristo wrote:
>> This patch creates a unique node for each clock in the OMAP4 power,
>> reset and clock manager (PRCM). OMAP443x and OMAP446x have slightly
>> different clock tree which is taken into account in the data.
>>
>> Signed-off-by: Tero Kristo <t-kristo@ti•com>
>> ---
>> arch/arm/boot/dts/omap443x-clocks.dtsi | 17 +
>> arch/arm/boot/dts/omap443x.dtsi | 8 +
>> arch/arm/boot/dts/omap4460.dtsi | 8 +
>> arch/arm/boot/dts/omap446x-clocks.dtsi | 27 +
>> arch/arm/boot/dts/omap44xx-clocks.dtsi | 1654
>> ++++++++++++++++++++++++++++++++
> arch/arm/boot/dts/omap44xx-common-clocks.dtsi ?
>> 5 files changed, 1714 insertions(+)
>> create mode 100644 arch/arm/boot/dts/omap443x-clocks.dtsi
>> create mode 100644 arch/arm/boot/dts/omap446x-clocks.dtsi
>> create mode 100644 arch/arm/boot/dts/omap44xx-clocks.dtsi
>>
>> diff --git a/arch/arm/boot/dts/omap443x-clocks.dtsi
>> b/arch/arm/boot/dts/omap443x-clocks.dtsi
>> new file mode 100644
>> index 0000000..2bd82b2
>> --- /dev/null
>> +++ b/arch/arm/boot/dts/omap443x-clocks.dtsi
>> @@ -0,0 +1,17 @@
>> +/*
>> + * Device Tree Source for OMAP443x clock data
>> + *
>> + * Copyright (C) 2013 Texas Instruments, Inc.
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License version 2 as
>> + * published by the Free Software Foundation.
>> + */
>> +
> Doing
> /include/ "omap44xx-clocks.dtsi" might avoid including that header in
> corresponding SoC dtsi,
> OR:
>> +bandgap_fclk: bandgap_fclk at 4a307888 {
>> + #clock-cells = <0>;
>> + compatible = "gate-clock";
>> + clocks = <&sys_32k_ck>;
>> + bit-shift = <8>;
>> + reg = <0x4a307888 0x4>;
>> +};
>
> Since we already have omap443x.dtsi and omap446x.dtsi, do we need
> clock.dtsi containing just a few entries?
> instead we could define the delta clocks in the clocks section, and save
> on two additional files, no?
Yea, thats also possible. I didn't want to put clock nodes there though,
just for clarity. I think this is for whoever is maintaining the DTS
files to answer.
>
> [...]
>
>> diff --git a/arch/arm/boot/dts/omap44xx-clocks.dtsi
>> b/arch/arm/boot/dts/omap44xx-clocks.dtsi
>> new file mode 100644
>> index 0000000..ed6bc9b
>> --- /dev/null
>> +++ b/arch/arm/boot/dts/omap44xx-clocks.dtsi
> [...]
>
>> +dpll_abe_m2x2_ck: dpll_abe_m2x2_ck at 4a0041f0 {
>> + #clock-cells = <0>;
>> + compatible = "divider-clock";
>> + clocks = <&dpll_abe_x2_ck>;
>> + ti,autoidle-shift = <8>;
>> + reg = <0x4a0041f0 0x4>;
>> + bit-mask = <0x1f>;
>> + index-starts-at-one;
>> + ti,autoidle-low;
>> +};
>> +
>> +abe_24m_fclk: abe_24m_fclk {
>> + #clock-cells = <0>;
>> + compatible = "fixed-factor-clock";
>> + clocks = <&dpll_abe_m2x2_ck>;
>> + clock-mult = <1>;
>> + clock-div = <8>;
>> +};
>> +
>> +abe_clk: abe_clk at 4a004108 {
>> + #clock-cells = <0>;
>> + compatible = "divider-clock";
>> + clocks = <&dpll_abe_m2x2_ck>;
>> + reg = <0x4a004108 0x4>;
>> + bit-mask = <0x3>;
>> + index-power-of-two;
>> +};
>> +
>> +aess_fclk: aess_fclk at 4a004528 {
> is there a naming convention used here? abe_clk, fclk etc?
The clock names are directly converted from existing data, so whatever
currently is there, will be in the DT also.
>
>> + #clock-cells = <0>;
>> + compatible = "divider-clock";
>> + clocks = <&abe_clk>;
>> + bit-shift = <24>;
>> + reg = <0x4a004528 0x4>;
>> + bit-mask = <0x1>;
>> +};
>
> [...]
>
>> +
>> +ocp2scp_usb_phy_phy_48m: ocp2scp_usb_phy_phy_48m at 4a0093e0 {
> _ck?
>
> [...]
>
>
next prev parent reply other threads:[~2013-07-31 14:49 UTC|newest]
Thread overview: 102+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-07-23 7:19 [PATCHv4 00/33] ARM: OMAP: clock conversion to DT Tero Kristo
2013-07-23 7:19 ` [PATCHv4 01/33] CLK: clkdev: add support for looking up clocks from DT Tero Kristo
2013-07-30 15:04 ` Nishanth Menon
2013-07-31 8:43 ` Tero Kristo
2013-07-23 7:19 ` [PATCHv4 02/33] clk: omap: introduce clock driver Tero Kristo
2013-07-30 15:21 ` Nishanth Menon
2013-07-31 8:59 ` Tero Kristo
2013-08-01 13:44 ` Nishanth Menon
2013-08-01 14:59 ` Tero Kristo
2013-07-23 7:19 ` [PATCHv4 03/33] CLK: OMAP4: Add DPLL clock support Tero Kristo
2013-07-30 16:23 ` Nishanth Menon
2013-07-31 9:46 ` Tero Kristo
2013-08-01 14:00 ` Nishanth Menon
2013-08-01 15:08 ` Tero Kristo
2013-08-01 15:13 ` Nishanth Menon
2013-08-01 8:29 ` Rajendra Nayak
2013-08-01 15:10 ` Nishanth Menon
2013-08-01 15:41 ` Tero Kristo
2013-07-23 7:19 ` [PATCHv4 04/33] CLK: omap: move part of the machine specific clock header contents to driver Tero Kristo
2013-07-30 18:22 ` Nishanth Menon
2013-07-31 9:59 ` Tero Kristo
2013-08-01 14:04 ` Nishanth Menon
2013-08-01 15:12 ` Tero Kristo
2013-08-01 15:21 ` Nishanth Menon
2013-07-23 7:20 ` [PATCHv4 05/33] CLK: omap: add DT duplicate clock registration mechanism Tero Kristo
2013-07-30 18:40 ` Nishanth Menon
2013-07-31 10:07 ` Tero Kristo
2013-08-01 14:25 ` Nishanth Menon
2013-08-01 15:18 ` Tero Kristo
2013-08-01 15:24 ` Nishanth Menon
2013-08-01 15:30 ` Tero Kristo
2013-08-02 7:22 ` Tony Lindgren
2013-07-23 7:20 ` [PATCHv4 06/33] CLK: omap: add autoidle support Tero Kristo
2013-07-30 18:56 ` Nishanth Menon
2013-07-31 10:13 ` Tero Kristo
2013-08-01 14:11 ` Nishanth Menon
2013-08-01 15:22 ` Tero Kristo
2013-07-23 7:20 ` [PATCHv4 07/33] CLK: omap: add support for OMAP gate clock Tero Kristo
2013-07-30 19:17 ` Nishanth Menon
2013-07-31 14:45 ` Tero Kristo
2013-08-01 14:33 ` Nishanth Menon
2013-08-01 15:29 ` Tero Kristo
2013-07-23 7:20 ` [PATCHv4 08/33] ARM: dts: omap4 clock data Tero Kristo
2013-07-30 19:27 ` Nishanth Menon
2013-07-31 14:49 ` Tero Kristo [this message]
2013-07-23 7:20 ` [PATCHv4 09/33] CLK: omap: add omap4 clock init file Tero Kristo
2013-07-30 19:33 ` Nishanth Menon
2013-07-31 14:52 ` Tero Kristo
2013-08-01 14:40 ` Nishanth Menon
2013-08-01 15:34 ` Tero Kristo
2013-08-01 16:10 ` Nishanth Menon
2013-07-23 7:20 ` [PATCHv4 10/33] ARM: OMAP4: remove old clock data and link in new clock init code Tero Kristo
2013-07-30 19:42 ` Nishanth Menon
2013-07-31 14:55 ` Tero Kristo
2013-07-23 7:20 ` [PATCHv4 11/33] ARM: dts: omap5 clock data Tero Kristo
2013-07-23 7:20 ` [PATCHv4 12/33] CLK: omap: add omap5 clock init file Tero Kristo
2013-07-23 7:20 ` [PATCHv4 13/33] ARM: dts: dra7 clock data Tero Kristo
2013-07-23 7:20 ` [PATCHv4 14/33] CLK: omap: add dra7 clock init file Tero Kristo
2013-07-23 7:20 ` [PATCHv4 15/33] CLK: OMAP: DPLL: add support for DT property ti, dpll-no-gate Tero Kristo
2013-07-30 19:18 ` [PATCHv4 15/33] CLK: OMAP: DPLL: add support for DT property ti,dpll-no-gate Nishanth Menon
2013-07-31 14:56 ` Tero Kristo
2013-07-23 7:20 ` [PATCHv4 16/33] CLK: OMAP: DPLL: do not of_iomap NULL autoidle register Tero Kristo
2013-07-30 19:49 ` Nishanth Menon
2013-07-31 14:57 ` Tero Kristo
2013-07-23 7:20 ` [PATCHv4 17/33] CLK: DT: add support for set-rate-parent flag Tero Kristo
2013-07-30 19:58 ` Nishanth Menon
2013-07-23 7:20 ` [PATCHv4 18/33] ARM: dts: am33xx clock data Tero Kristo
2013-07-23 7:20 ` [PATCHv4 19/33] CLK: omap: add am33xx clock init file Tero Kristo
2013-07-30 20:00 ` Nishanth Menon
2013-07-31 14:59 ` Tero Kristo
2013-08-01 14:43 ` Nishanth Menon
2013-08-01 15:35 ` Tero Kristo
2013-07-23 7:20 ` [PATCHv4 20/33] ARM: AM33xx: remove old clock data and link in new clock init code Tero Kristo
2013-07-23 7:20 ` [PATCHv4 21/33] CLK: OMAP: DPLL: add omap3 dpll support Tero Kristo
2013-07-30 20:08 ` Nishanth Menon
2013-07-31 15:03 ` Tero Kristo
2013-08-01 14:46 ` Nishanth Menon
2013-07-23 7:20 ` [PATCHv4 22/33] CLK: OMAP: update gate clock setup for OMAP3 Tero Kristo
2013-07-30 20:13 ` Nishanth Menon
2013-07-31 15:05 ` Tero Kristo
2013-07-23 7:20 ` [PATCHv4 23/33] CLK: OMAP: add interface clock support " Tero Kristo
2013-07-30 20:23 ` Nishanth Menon
2013-07-31 15:09 ` Tero Kristo
2013-08-01 14:50 ` Nishanth Menon
2013-07-23 7:20 ` [PATCHv4 24/33] CLK: OMAP: move some defines from machine to driver header Tero Kristo
2013-07-23 7:20 ` [PATCHv4 25/33] ARM: OMAP: hwmod: fix an incorrect clk type cast with _get_clkdm Tero Kristo
2013-07-23 7:20 ` [PATCHv4 26/33] CLK: omap: gate: add support for OMAP36xx dpllx_mx_ck:s Tero Kristo
2013-07-23 7:20 ` [PATCHv4 27/33] ARM: OMAP3: hwmod: initialize clkdm from clkdm_name Tero Kristo
2013-07-23 7:20 ` [PATCHv4 28/33] ARM: dts: omap3 clock data Tero Kristo
2013-07-23 7:20 ` [PATCHv4 30/33] clk: OMAP: DRA7: Add APLL support Tero Kristo
2013-07-23 7:20 ` [PATCHv4 31/33] ARM: dts: clk: Add apll related clocks Tero Kristo
2013-07-23 7:20 ` [PATCHv4 32/33] clk: OMAP: DRA7: Change apll_pcie_m2_ck to fixed factor clock Tero Kristo
2013-07-23 7:20 ` [PATCHv4 33/33] clk: DTS: DRA7: Add PCIe related clock nodes Tero Kristo
2013-07-23 8:24 ` [PATCHv4 00/33] ARM: OMAP: clock conversion to DT Tero Kristo
2013-07-24 14:16 ` Roger Quadros
2013-07-24 14:29 ` Tero Kristo
2013-07-24 14:34 ` Roger Quadros
2013-07-24 14:43 ` Tero Kristo
[not found] ` <1374564028-11352-30-git-send-email-t-kristo@ti.com>
2013-07-30 20:19 ` [PATCHv4 29/33] CLK: omap: add omap3 clock init file Nishanth Menon
2013-07-31 6:35 ` Tony Lindgren
2013-07-31 15:10 ` Tero Kristo
2013-08-02 7:24 ` Tony Lindgren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=51F923F8.6080700@ti.com \
--to=t-kristo@ti$(echo .)com \
--cc=linux-arm-kernel@lists$(echo .)infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox