From: rnayak@ti•com (Rajendra Nayak)
To: linux-arm-kernel@lists•infradead.org
Subject: [PATCH v3 0/9] DRA7xx core support
Date: Mon, 12 Aug 2013 12:10:26 +0530 [thread overview]
Message-ID: <5208835A.6000506@ti.com> (raw)
In-Reply-To: <1375633657-6835-1-git-send-email-rnayak@ti.com>
On Sunday 04 August 2013 09:57 PM, Rajendra Nayak wrote:
> Changes in v3:
> -1- Dropped some clock/dpll framework builds for dra7
> -2- Added all instances of IPs in dtsi file
> -3- dtsi does a 'disabled' by default and dts enables as needed
> -4- soc_is_dra7xx() based on DT compatible instead of using ID code
>
> Changes in v2:
> -1- Fixed minor changelog details
> -2- Dropped the SRAM support patch since we need to move to drivers/misc/sram.c
> -3- Added DTS update patches to this series which were earlier posted as
> part of the data series (Since they don't have much objections as against the
> other in-kernel data files)
> -4- Updated the EVM dts file with pin config details for uart/mcspi and i2c
>
> DRA7xx based SoCs' are high-performance, infotainment application devices,
> based on enhanced OMAP architecture integrated on a 28nm
> technology.
>
> The DRA7xx family is composed of DRA75x and DRA74x devices.
> The current device for which the patches add support is the
> DRA752 SoC.
>
> Most of the core IPs are similar to those found on the OMAP5
> devices, including the dual cortex-A15 based MPU subsystem,
> which has helped quite some reuse from existing OMAP5 support.
>
> This series contains only core support patches and none of
> the PRCM and hwmod data needed for the device to boot.
Tony, any chance of this series making it to 3.12?
regards,
Rajendra
>
> The bootloader support for the platform is already available
> in mainline u-boot.
>
> The patches posted in this series are available at:
> git://github.com/rrnayak/linux.git for-3.12/dra-core-v3
>
> The patches (including the ones for in-kernel data) which boot
> on dra7xx evm are available at:
> t://github.com/rrnayak/linux.git out-of-tree/dra-integrated-v3
>
> R Sricharan (8):
> ARM: DRA7: Reuse all of PRCM and MPUSS SMP infra
> ARM: DRA7: Reuse io tables and add a new .init_early
> ARM: DRA7: Resue the clocksource, clockevent support
> ARM: DRA7: board-generic: Add basic DT support
> ARM: DRA7: Kconfig: Make ARCH_NR_GPIO default to 512
> ARM: DRA7: dts: Add the dts files for dra7 SoC and dra7-evm board
> ARM: DRA7: id: Add cpu detection support for DRA7xx based SoCs'
> ARM: DRA7: Add the build support in omap2plus
>
> Rajendra Nayak (1):
> ARM: DRA7: hwmod: Reuse the soc_ops used for OMAP4/5
>
> .../devicetree/bindings/arm/omap/omap.txt | 3 +
> arch/arm/Kconfig | 2 +-
> arch/arm/boot/dts/Makefile | 3 +-
> arch/arm/boot/dts/dra7-evm.dts | 140 +++++
> arch/arm/boot/dts/dra7.dtsi | 567 ++++++++++++++++++++
> arch/arm/configs/omap2plus_defconfig | 1 +
> arch/arm/mach-omap1/include/mach/soc.h | 1 +
> arch/arm/mach-omap2/Kconfig | 12 +-
> arch/arm/mach-omap2/Makefile | 6 +
> arch/arm/mach-omap2/board-generic.c | 18 +
> arch/arm/mach-omap2/common.h | 1 +
> arch/arm/mach-omap2/id.c | 4 +-
> arch/arm/mach-omap2/io.c | 20 +-
> arch/arm/mach-omap2/omap54xx.h | 4 +
> arch/arm/mach-omap2/omap_hwmod.c | 2 +-
> arch/arm/mach-omap2/soc.h | 17 +
> arch/arm/mach-omap2/timer.c | 3 +-
> arch/arm/plat-omap/Kconfig | 2 +-
> 18 files changed, 795 insertions(+), 11 deletions(-)
> create mode 100644 arch/arm/boot/dts/dra7-evm.dts
> create mode 100644 arch/arm/boot/dts/dra7.dtsi
>
next prev parent reply other threads:[~2013-08-12 6:40 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-08-04 16:27 [PATCH v3 0/9] DRA7xx core support Rajendra Nayak
2013-08-04 16:27 ` [PATCH v3 1/9] ARM: DRA7: Reuse all of PRCM and MPUSS SMP infra Rajendra Nayak
2013-08-04 16:27 ` [PATCH v3 2/9] ARM: DRA7: Reuse io tables and add a new .init_early Rajendra Nayak
2013-08-04 16:27 ` [PATCH v3 3/9] ARM: DRA7: Resue the clocksource, clockevent support Rajendra Nayak
2013-08-04 16:27 ` [PATCH v3 4/9] ARM: DRA7: board-generic: Add basic DT support Rajendra Nayak
2013-08-04 16:27 ` [PATCH v3 5/9] ARM: DRA7: Kconfig: Make ARCH_NR_GPIO default to 512 Rajendra Nayak
2013-08-04 16:27 ` [PATCH v3 6/9] ARM: DRA7: dts: Add the dts files for dra7 SoC and dra7-evm board Rajendra Nayak
2013-08-04 16:27 ` [PATCH v3 7/9] ARM: DRA7: id: Add cpu detection support for DRA7xx based SoCs' Rajendra Nayak
2013-08-05 11:44 ` Grygorii Strashko
2013-08-06 8:11 ` Rajendra Nayak
2013-08-06 11:59 ` Grygorii Strashko
2013-08-04 16:27 ` [PATCH v3 8/9] ARM: DRA7: hwmod: Reuse the soc_ops used for OMAP4/5 Rajendra Nayak
2013-08-04 16:27 ` [PATCH v3 9/9] ARM: DRA7: Add the build support in omap2plus Rajendra Nayak
2013-08-12 6:40 ` Rajendra Nayak [this message]
2013-08-12 8:24 ` [PATCH v3 0/9] DRA7xx core support Tony Lindgren
2013-08-12 8:27 ` Rajendra Nayak
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5208835A.6000506@ti.com \
--to=rnayak@ti$(echo .)com \
--cc=linux-arm-kernel@lists$(echo .)infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox