From: kgene.kim@samsung•com (Kukjin Kim)
To: linux-arm-kernel@lists•infradead.org
Subject: [PATCH v7 0/7] Initial Device Tree support for S3C64xx
Date: Mon, 26 Aug 2013 02:31:11 +0900 [thread overview]
Message-ID: <521A3F5F.8040809@samsung.com> (raw)
In-Reply-To: <1377120111-25601-1-git-send-email-tomasz.figa@gmail.com>
On 08/22/13 06:21, Tomasz Figa wrote:
> This series adds Device Tree support for Samsung S3C64xx SoC series.
>
> It fixes several problems preventing from booting an S3C64xx-based system
> using Device Tree, adds all the infrastructure for Device Tree-based board
> support, including mach-s3c64xx-dt and dts include files for S3C64xx SoCs,
> and basic device tree source for FriendlyARM Mini6410 and SAMSUNG SMDK6410
> boards.
>
> Current support is somewhat limite, but should be fine as a start and
> will be extended in future, hopefully with help of S3C64xx board
> maintainers.
>
> Depends on:
> - [PATCH v2 0/8] Common Clock Framework support for Samsung S3C64xx
> http://thread.gmane.org/gmane.linux.usb.general/90493
>
> On Samsung S3C6410-based Mini6410 and SMDK6410 boards:
>
> Tested-by: Tomasz Figa<tomasz.figa@gmail•com>
>
> Changes since v6:
> - Rebased onto current for-next branch of Kgene's tree,
> - Dropped the idea of .init_platform() machine callback,
> - Added support for i2c controllers,
> - Replaced separate apb and ahb nodes with a single common soc node,
> - Updated cpus node according to CPU bindings,
> - Updated fixed rate clock nodes to use generic bindings,
> - Added support for PWM buzzer and I2C EEPROM on Mini6410 board,
> - Simplified the condition of skipping legacy GPIO initialization.
>
> Changes since v5:
> - Rebased onto current for-next branch of Kgene's tree,
> - Added support for new Common Clock Framework based clock driver,
> - Introduced hierarchical structure of device nodes (representing
> physical AHB and APB buses),
> - Bypassed most of legacy initialization when booting with DT,
> - Used preprocessor macros in dts files to improve readabilty,
> - Added support for SMDK6410 board.
>
> Changes since v4:
> - Rebased onto current for-next branch of Kgene's tree
> - Added support for pinctrl (driver merged through pinctrl tree)
> - Added labels to all nodes that can be overridden from board dts
> - Modified board dts to use the&label syntax to reference device nodes
>
> Changes since v3:
> - Rebased onto current for-next branch of Kgene's tree
> - Updated timer node for next version of samsung-time patches
> - Replaced local s3c64xx_dt_init_irq with irqchip_init
>
> Changes since v2:
> - Updated timer node for next version of samsung-time patches
>
> Changes since v1:
> - Dropped two VIC-related patches that are no longer necessary
> - Added Device Tree-based instantation of system timers
> - Corrected VIC interrupt specifiers
> - Adjusted CPU compatible values and dropped @id
>
> Tomasz Figa (7):
> ARM: common: vic: Parse interrupt and resume masks from device tree
> ARM: s3c64xx: Bypass legacy initialization when booting with DT
> gpio: samsung: Skip initialization if device tree is present
> ARM: s3c64xx: Add board file for boot using Device Tree
> ARM: dts: Add basic dts include files for Samsung S3C64xx SoCs
> ARM: dts: Add dts file for S3C6410-based Mini6410 board
> ARM: dts: Add dts file for S3C6410-based SMDK6410 board
>
> Documentation/devicetree/bindings/arm/vic.txt | 6 +
> arch/arm/boot/dts/Makefile | 2 +
> arch/arm/boot/dts/s3c6400.dtsi | 41 ++
> arch/arm/boot/dts/s3c6410-mini6410.dts | 228 +++++++++
> arch/arm/boot/dts/s3c6410-smdk6410.dts | 103 ++++
> arch/arm/boot/dts/s3c6410.dtsi | 57 +++
> arch/arm/boot/dts/s3c64xx-pinctrl.dtsi | 687 ++++++++++++++++++++++++++
> arch/arm/boot/dts/s3c64xx.dtsi | 199 ++++++++
> arch/arm/mach-s3c64xx/Kconfig | 16 +
> arch/arm/mach-s3c64xx/Makefile | 1 +
> arch/arm/mach-s3c64xx/common.c | 12 +
> arch/arm/mach-s3c64xx/dma.c | 9 +
> arch/arm/mach-s3c64xx/irq-pm.c | 9 +
> arch/arm/mach-s3c64xx/mach-s3c64xx-dt.c | 85 ++++
> arch/arm/mach-s3c64xx/s3c6400.c | 9 +
> arch/arm/mach-s3c64xx/s3c6410.c | 9 +
> arch/arm/plat-samsung/init.c | 12 +-
> drivers/gpio/gpio-samsung.c | 34 +-
> drivers/irqchip/irq-vic.c | 7 +-
> 19 files changed, 1497 insertions(+), 29 deletions(-)
> create mode 100644 arch/arm/boot/dts/s3c6400.dtsi
> create mode 100644 arch/arm/boot/dts/s3c6410-mini6410.dts
> create mode 100644 arch/arm/boot/dts/s3c6410-smdk6410.dts
> create mode 100644 arch/arm/boot/dts/s3c6410.dtsi
> create mode 100644 arch/arm/boot/dts/s3c64xx-pinctrl.dtsi
> create mode 100644 arch/arm/boot/dts/s3c64xx.dtsi
> create mode 100644 arch/arm/mach-s3c64xx/mach-s3c64xx-dt.c
>
Nice, applied this whole series.
Thanks,
Kukjin
prev parent reply other threads:[~2013-08-25 17:31 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-08-21 21:21 [PATCH v7 0/7] Initial Device Tree support for S3C64xx Tomasz Figa
2013-08-21 21:21 ` [PATCH v7 1/7] ARM: common: vic: Parse interrupt and resume masks from device tree Tomasz Figa
2013-08-21 23:19 ` Linus Walleij
2013-08-22 7:57 ` Tomasz Figa
2013-08-22 23:22 ` [PATCH v8 1/7] irqchip: " Tomasz Figa
2013-08-23 18:12 ` Linus Walleij
2013-08-23 22:11 ` Stephen Warren
2013-08-23 23:04 ` Tomasz Figa
2013-08-23 23:19 ` Stephen Warren
2013-08-23 23:33 ` Tomasz Figa
2013-08-24 15:25 ` Rob Herring
2013-08-24 15:31 ` Tomasz Figa
2013-08-24 16:35 ` Rob Herring
2013-08-24 16:57 ` Tomasz Figa
2013-08-23 23:54 ` [PATCH v9 " Tomasz Figa
2013-08-21 21:21 ` [PATCH v7 2/7] ARM: s3c64xx: Bypass legacy initialization when booting with DT Tomasz Figa
2013-08-21 21:21 ` [PATCH v7 3/7] gpio: samsung: Skip initialization if device tree is present Tomasz Figa
2013-08-21 23:21 ` Linus Walleij
2013-08-22 8:06 ` Tomasz Figa
2013-08-22 9:48 ` Mark Brown
2013-08-22 9:59 ` Kukjin Kim
2013-08-22 23:19 ` Tomasz Figa
2013-08-23 18:11 ` Linus Walleij
2013-08-25 17:21 ` Kukjin Kim
2013-08-22 9:45 ` Kukjin Kim
2013-08-21 21:21 ` [PATCH v7 4/7] ARM: s3c64xx: Add board file for boot using Device Tree Tomasz Figa
2013-08-21 21:21 ` [PATCH v7 5/7] ARM: dts: Add basic dts include files for Samsung S3C64xx SoCs Tomasz Figa
2013-08-22 23:24 ` [PATCH v8 " Tomasz Figa
2013-08-23 23:56 ` [PATCH v9 " Tomasz Figa
2013-08-21 21:21 ` [PATCH v7 6/7] ARM: dts: Add dts file for S3C6410-based Mini6410 board Tomasz Figa
2013-08-21 21:21 ` [PATCH v7 7/7] ARM: dts: Add dts file for S3C6410-based SMDK6410 board Tomasz Figa
2013-08-25 17:31 ` Kukjin Kim [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=521A3F5F.8040809@samsung.com \
--to=kgene.kim@samsung$(echo .)com \
--cc=linux-arm-kernel@lists$(echo .)infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox