Subject: [PATCH 0/2] OMAP4+: Get rid of internal SRAM handling

From: [email-masked] (Santosh Shilimkar)
Date: Wed, 28 Aug 2013 09:38:34 -0400

On Wednesday 28 August 2013 02:29 AM, Nayak, Rajendra wrote:
> On Tuesday 27 August 2013 06:55 PM, Santosh Shilimkar wrote:
>> + Paul,
>>
>> On Tuesday 27 August 2013 06:11 AM, Rajendra Nayak wrote:
>>> Make all OMAP DT only platforms (am33xx, am43xx, omap4 and omap5)
>>> use drivers/misc/sram.c driver instead of the omap internal
>>> implementation for SRAM handling.
>>>
>>> Rajendra Nayak (2):
>>>   ARM: AM335x: Get rid of unused sram init function
>>>   ARM: OMAP4+: Move SRAM data to DT
>>>
>>>  arch/arm/boot/dts/am33xx.dtsi        |    5 +++++
>>>  arch/arm/boot/dts/am4372.dtsi        |    5 +++++
>>>  arch/arm/boot/dts/omap4.dtsi         |    5 +++++
>>>  arch/arm/boot/dts/omap5.dtsi         |    5 +++++
>>>  arch/arm/configs/omap2plus_defconfig |    1 +
>>>  arch/arm/mach-omap2/sram.c           |   39 +---------------------------------
>>>  arch/arm/mach-omap2/sram.h           |    1 -
>>>  7 files changed, 22 insertions(+), 39 deletions(-)
>>>
>> Really nice to see the SRAM code getting moved now. Thanks
>> a lot Rajendra.
>>
>> - The sram_init() seems to be the post core init call.
>> Hope this is not a problem for SDRC init which needs to have
>> SRAM ready to update the DDR parameters.
> 
> It should be fine given its needed only during core dvfs. Besides
> drivers/misc/sram.c is useful only on DT platforms, so for now OMAP2/3
> continue to use the omap specific sram handling.
> 
Its used in early boot to initialize the DDR parameters and then
later these can be used based on whether core DVFS supported or
not. Look for _omap2_init_reprogram_sdrc() which has init
dependency with omap_sram_init().

Regards,
Santosh