Subject: [PATCH 1/7] usb: dwc3: get "usb_phy" only if the platform indicates the presence of PHY

From: [email-masked] (Roger Quadros)
Date: Thu, 12 Sep 2013 14:04:36 +0300

Hi,

On 09/12/2013 01:47 PM, Vivek Gautam wrote:
> On Thu, Sep 12, 2013 at 4:06 PM, Roger Quadros <[email-masked]> wrote:
>> Hi Kishon,
>>
>> On 09/02/2013 06:43 PM, Kishon Vijay Abraham I wrote:
>>> There can be systems which does not have a external usb_phy, so get
>>> usb_phy only if usb-phy property is added in the case of dt boot or if
>>> platform_data indicates the presence of PHY. Also remove checking if
>>> return value is -ENXIO since it's now changed to always enable usb_phy layer.
>>>
>>> Signed-off-by: Kishon Vijay Abraham I <[email-masked]>
>>> ---
>>>  drivers/usb/dwc3/Kconfig         |    1 +
>>>  drivers/usb/dwc3/core.c          |   60 +++++++++++++++++---------------------
>>>  drivers/usb/dwc3/platform_data.h |    1 +
>>>  3 files changed, 28 insertions(+), 34 deletions(-)
>>>
>>> diff --git a/drivers/usb/dwc3/Kconfig b/drivers/usb/dwc3/Kconfig
>>> index f969ea2..cfc16dd 100644
>>> --- a/drivers/usb/dwc3/Kconfig
>>> +++ b/drivers/usb/dwc3/Kconfig
>>> @@ -2,6 +2,7 @@ config USB_DWC3
>>>       tristate "DesignWare USB3 DRD Core Support"
>>>       depends on (USB || USB_GADGET) && GENERIC_HARDIRQS && HAS_DMA
>>>       depends on EXTCON
>>> +     select USB_PHY
>>>       select USB_XHCI_PLATFORM if USB_SUPPORT && USB_XHCI_HCD
>>>       help
>>>         Say Y or M here if your system has a Dual Role SuperSpeed
>>> diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
>>> index 474162e..428c29e 100644
>>> --- a/drivers/usb/dwc3/core.c
>>> +++ b/drivers/usb/dwc3/core.c
>>> @@ -387,16 +387,38 @@ static int dwc3_probe(struct platform_device *pdev)
>>>       if (node) {
>>>               dwc->maximum_speed = of_usb_get_maximum_speed(node);
>>>
>>> -             dwc->usb2_phy = devm_usb_get_phy_by_phandle(dev, "usb-phy", 0);
>>> -             dwc->usb3_phy = devm_usb_get_phy_by_phandle(dev, "usb-phy", 1);
>>> +             if (of_property_read_bool(node, "usb-phy")) {
>>> +                     dwc->usb2_phy = devm_usb_get_phy_by_phandle(dev,
>>> +                             "usb-phy", 0);
>>> +                     if (IS_ERR(dwc->usb2_phy))
>>> +                             return PTR_ERR(dwc->usb2_phy);
>>> +                     dwc->usb3_phy = devm_usb_get_phy_by_phandle(dev,
>>> +                             "usb-phy", 1);
>>> +                     if (IS_ERR(dwc->usb3_phy))
>>> +                             return PTR_ERR(dwc->usb3_phy);
>>
>> Some DWC3 instances use only usb2_phy. e.g. on DRA7 the 2nd dwc3 instance doesn't use usb3_phy.
>> This needs to be a valid case and driver shouldn't error out.
> 
> So, i think adding flexibility to DWC3 to have either
> usb2-phy/usb3-phy or both of them seems to be valid point.
> Any suggestions ?
> 

For high speed operation we need only usb2_phy but for super speed we need both usb2_phy
and usb3_phy.

Why would a dwc3 controller use only usb3_phy? A USB3.0 interface has to be compatible with
USB2.0 as well, no?

cheers,
-roger