Subject: [PATCH 2/2] ARM: dts: dra7-evm: Add mmc2 node for eMMC support

From: [email-masked] (Benoit Cousson)
Date: Tue, 24 Sep 2013 11:41:21 +0200

+ Sekhar

Hi Balaji,

On 26/08/2013 15:53, Balaji T K wrote:
> Add mmc2 dt node to dra7-evm board
> and model eMMC vcc as fixed regulator.
>
> Signed-off-by: Balaji T K <[email-masked]>
> ---
>   arch/arm/boot/dts/dra7-evm.dts |   14 ++++++++++++++
>   1 files changed, 14 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts
> index a59bbd0..2062724 100644
> --- a/arch/arm/boot/dts/dra7-evm.dts
> +++ b/arch/arm/boot/dts/dra7-evm.dts
> @@ -17,6 +17,13 @@
>   		device_type = "memory";
>   		reg = <0x80000000 0x60000000>; /* 1536 MB */
>   	};
> +
> +	mmc2_3v3: fixedregulator-mmc2 {
> +		compatible = "regulator-fixed";
> +		regulator-name = "mmc2_3v3";
> +		regulator-min-microvolt = <3300000>;
> +		regulator-max-microvolt = <3300000>;
> +	};
>   };
>
>   &dra7_pmx_core {
> @@ -257,3 +264,10 @@
>   	vmmc-supply = <&ldo1_reg>;
>   	bus-width = <4>;
>   };
> +
> +&mmc2 {
> +	status = "okay";
> +	vmmc-supply = <&mmc2_3v3>;
> +	bus-width = <8>;
> +	ti,non-removable;

Sekhar just posted a series to replace that with a non-TI attribute: 
non-removable.

I'm not sure if this got merged, but it might be good to use the 
standard attribute instead.

Regards,
Benoit