From: joelf@ti•com (Joel Fernandes)
To: linux-arm-kernel@lists•infradead.org
Subject: [PATCH v2 3/9] ARM: dts: Add SHAM data and documentation for AM33XX
Date: Sat, 5 Oct 2013 13:18:08 -0500 [thread overview]
Message-ID: <525057E0.80009@ti.com> (raw)
In-Reply-To: <20131004142644.GI6999@e106331-lin.cambridge.arm.com>
On 10/04/2013 09:26 AM, Mark Rutland wrote:
> On Mon, Sep 30, 2013 at 04:13:00PM +0100, Joel Fernandes wrote:
>> From: "Mark A. Greer" <mgreer@animalcreek•com>
>>
>> Add the generic AM33XX SHAM module's device tree data and
>> enable it for the am335x-evm, am335x-evmsk, and am335x-bone
>> platforms. Also add Documentation file describing the data
>> for the SHAM module.
>>
>> [joelf at ti.com: Dropped interrupt-parrent property]
>> CC: Paul Walmsley <paul@pwsan•com>
>> Signed-off-by: Mark A. Greer <mgreer@animalcreek•com>
>> ---
>> .../devicetree/bindings/crypto/omap-sham.txt | 31 ++++++++++++++++++++++
>> arch/arm/boot/dts/am335x-bone.dts | 4 +++
>> arch/arm/boot/dts/am335x-evm.dts | 4 +++
>> arch/arm/boot/dts/am335x-evmsk.dts | 4 +++
>> arch/arm/boot/dts/am33xx.dtsi | 9 +++++++
>> 5 files changed, 52 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/crypto/omap-sham.txt
>>
>> diff --git a/Documentation/devicetree/bindings/crypto/omap-sham.txt b/Documentation/devicetree/bindings/crypto/omap-sham.txt
>> new file mode 100644
>> index 0000000..b97710f
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/crypto/omap-sham.txt
>> @@ -0,0 +1,31 @@
>> +OMAP SoC SHA crypto Module
>> +
>> +Required properties:
>> +
>> +- compatible : Should contain entries for this and backward compatible
>> + SHAM versions:
>> + - "ti,omap2-sham" for OMAP2 & OMAP3.
>> + - "ti,omap4-sham" for OMAP4 and AM33XX.
>> + Note that these two versions are incompatible.
>> +- ti,hwmods: Name of the hwmod associated with the SHAM module
>> +- reg : Offset and length of the register set for the module
>> +- interrupt-parent : the phandle for the interrupt controller that
>> + services interrupts for this module.
>
> I don't think this is strictly speaking necessary -- it's mostly going
> to be implicit (it is in the dtsi below). As this is a standard
> property, you don't need to document it here.
Ok, dropping from documentation.
>> +- interrupts : the interrupt number for the SHAM module.
>
> Sorry, I missed this last time, but this should be interrupt-specifier
> rather than interrupt number.
Ok, done.
>
> Otherwise, this looks good to me. With the fixups above:
>
> Acked-by: Mark Rutland <mark.rutland@arm•com>
Thanks!
-Joel
>
>> +
>> +Optional properties:
>> +- dmas: DMA specifier for the rx dma. See the DMA client binding,
>> + Documentation/devicetree/bindings/dma/dma.txt
>> +- dma-names: DMA request name. Should be "rx" if a dma is present.
>> +
>> +Example:
>> + /* AM335x */
>> + sham: sham at 53100000 {
>> + compatible = "ti,omap4-sham";
>> + ti,hwmods = "sham";
>> + reg = <0x53100000 0x200>;
>> + interrupt-parent = <&intc>;
>> + interrupts = <109>;
>> + dmas = <&edma 36>;
>> + dma-names = "rx";
>> + };
>> diff --git a/arch/arm/boot/dts/am335x-bone.dts b/arch/arm/boot/dts/am335x-bone.dts
>> index 0d63348..8a9802e 100644
>> --- a/arch/arm/boot/dts/am335x-bone.dts
>> +++ b/arch/arm/boot/dts/am335x-bone.dts
>> @@ -19,3 +19,7 @@
>> &mmc1 {
>> vmmc-supply = <&ldo3_reg>;
>> };
>> +
>> +&sham {
>> + status = "okay";
>> +};
>> diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts
>> index 23b0a3e..d59e51c 100644
>> --- a/arch/arm/boot/dts/am335x-evm.dts
>> +++ b/arch/arm/boot/dts/am335x-evm.dts
>> @@ -522,3 +522,7 @@
>> status = "okay";
>> vmmc-supply = <&vmmc_reg>;
>> };
>> +
>> +&sham {
>> + status = "okay";
>> +};
>> diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts
>> index bc93895..d45a330 100644
>> --- a/arch/arm/boot/dts/am335x-evmsk.dts
>> +++ b/arch/arm/boot/dts/am335x-evmsk.dts
>> @@ -424,3 +424,7 @@
>> status = "okay";
>> vmmc-supply = <&vmmc_reg>;
>> };
>> +
>> +&sham {
>> + status = "okay";
>> +};
>> diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
>> index 553adc6..299710b 100644
>> --- a/arch/arm/boot/dts/am33xx.dtsi
>> +++ b/arch/arm/boot/dts/am33xx.dtsi
>> @@ -710,5 +710,14 @@
>> #size-cells = <1>;
>> status = "disabled";
>> };
>> +
>> + sham: sham at 53100000 {
>> + compatible = "ti,omap4-sham";
>> + ti,hwmods = "sham";
>> + reg = <0x53100000 0x200>;
>> + interrupts = <109>;
>> + dmas = <&edma 36>;
>> + dma-names = "rx";
>> + };
>> };
>> };
>> --
>> 1.8.1.2
>>
>>
next prev parent reply other threads:[~2013-10-05 18:18 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-09-30 15:12 [PATCH v2 0/9] ARM: dts: DT data for OMAP platforms for v3.13 Joel Fernandes
2013-09-30 15:12 ` [PATCH v2 1/9] omap4: dts: Add node for AES Joel Fernandes
2013-09-30 15:12 ` [PATCH v2 2/9] omap4: dts: Add node for DES3DES module Joel Fernandes
2013-09-30 15:13 ` [PATCH v2 3/9] ARM: dts: Add SHAM data and documentation for AM33XX Joel Fernandes
2013-10-04 14:26 ` Mark Rutland
2013-10-05 18:18 ` Joel Fernandes [this message]
2013-09-30 15:13 ` [PATCH v2 4/9] ARM: dts: Add AES " Joel Fernandes
2013-10-04 14:33 ` Mark Rutland
2013-10-05 18:29 ` Joel Fernandes
2013-09-30 15:13 ` [PATCH v2 5/9] am33xx: dts: Fix AES interrupt number Joel Fernandes
2013-10-04 14:19 ` Benoit Cousson
2013-09-30 15:13 ` [PATCH v2 6/9] ARM: am437x: dts: Add AES node for am437x Joel Fernandes
2013-09-30 15:13 ` [PATCH v2 7/9] ARM: am437x: dts: Add DES " Joel Fernandes
2013-09-30 15:13 ` [PATCH v2 8/9] ARM: dts: AM33XX: Add LCDC info into am335x-evm Joel Fernandes
2013-09-30 15:13 ` [PATCH v2 9/9] dts: boneblack: add pinmux and hdmi node to enable display Joel Fernandes
2013-10-03 13:25 ` [PATCH v2 0/9] ARM: dts: DT data for OMAP platforms for v3.13 Benoit Cousson
2013-10-04 2:00 ` Joel Fernandes
2013-10-04 14:10 ` Benoit Cousson
2013-10-04 14:50 ` Joel Fernandes
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=525057E0.80009@ti.com \
--to=joelf@ti$(echo .)com \
--cc=linux-arm-kernel@lists$(echo .)infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox