From: bcousson@baylibre•com (Benoit Cousson)
To: linux-arm-kernel@lists•infradead.org
Subject: [RFCv3 7/7] ARM: dts: N900: Add SSI information
Date: Tue, 22 Oct 2013 14:48:45 +0200 [thread overview]
Message-ID: <5266742D.9050604@baylibre.com> (raw)
In-Reply-To: <1381091235-18293-8-git-send-email-sre@debian.org>
Hi Sebastian,
Thanks to Tony, I've just realized that I missed all your patches, that
for some reason ended-up in my junk folder :-(
That being said, I cannot apply any of your DTS patches! What base
branch are you using?
Could you repost all your pending DTS patches in one series rebased on
top of my for_3.13/dts?
Thanks,
Benoit
On 06/10/2013 22:27, Sebastian Reichel wrote:
> Add SSI device tree data for OMAP3 and Nokia N900.
>
> Signed-off-by: Sebastian Reichel <sre@debian•org>
> ---
> arch/arm/boot/dts/omap3-n900.dts | 12 ++++++++++
> arch/arm/boot/dts/omap3.dtsi | 47 ++++++++++++++++++++++++++++++++++++++++
> 2 files changed, 59 insertions(+)
>
> diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts
> index 0582356..0fbb77e 100644
> --- a/arch/arm/boot/dts/omap3-n900.dts
> +++ b/arch/arm/boot/dts/omap3-n900.dts
> @@ -186,6 +186,18 @@
> power = <50>;
> };
>
> +&ssi_port1 {
> + ti,ssi-cawake-gpio = <&gpio5 23 GPIO_ACTIVE_HIGH>; /* 151 */
> +
> + ssi-char {
> + compatible = "ssi-char";
> + };
> +};
> +
> +&ssi_port2 {
> + status = "disabled";
> +};
> +
> &uart1 {
> pinctrl-names = "default";
> pinctrl-0 = <&uart1_pins>;
> diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
> index 7d95cda..9f60b82 100644
> --- a/arch/arm/boot/dts/omap3.dtsi
> +++ b/arch/arm/boot/dts/omap3.dtsi
> @@ -532,5 +532,52 @@
> num-eps = <16>;
> ram-bits = <12>;
> };
> +
> + ssi: ssi-controller at 48058000 {
> + compatible = "ti,omap3-ssi";
> + ti,hwmods = "ssi";
> +
> + reg = <0x48058000 0x1000>,
> + <0x48059000 0x1000>;
> + reg-names = "sys",
> + "gdd";
> +
> + interrupts = <71>;
> + interrupt-names = "gdd_mpu";
> +
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> +
> + ssi_port1: ssi-port at 0 {
> + compatible = "ti,omap3-ssi-port";
> +
> + reg = <0x4805a000 0x800>,
> + <0x4805a800 0x800>;
> + reg-names = "tx",
> + "rx";
> +
> + interrupt-parent = <&intc>;
> + interrupts = <67>,
> + <68>;
> + interrupt-names = "mpu_irq0",
> + "mpu_irq1";
> + };
> +
> + ssi_port2: ssi-port at 1 {
> + compatible = "ti,omap3-ssi-port";
> +
> + reg = <0x4805b000 0x800>,
> + <0x4805b800 0x800>;
> + reg-names = "tx",
> + "rx";
> +
> + interrupt-parent = <&intc>;
> + interrupts = <69>,
> + <70>;
> + interrupt-names = "mpu_irq0",
> + "mpu_irq1";
> + };
> + };
> };
> };
>
--
Beno?t Cousson
BayLibre
Embedded Linux Technology Lab
www.baylibre.com
next prev parent reply other threads:[~2013-10-22 12:48 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-10-06 20:27 [RFCv3 0/7] OMAP SSI driver Sebastian Reichel
2013-10-08 17:28 ` Tony Lindgren
2013-10-10 17:21 ` Sebastian Reichel
2013-10-10 17:32 ` Tony Lindgren
2013-10-10 18:28 ` Aaro Koskinen
2013-10-10 20:02 ` Sebastian Reichel
2013-10-10 20:19 ` Aaro Koskinen
2013-10-10 22:22 ` Sebastian Reichel
2013-10-24 8:27 ` Pavel Machek
2013-10-11 8:06 ` Linus Walleij
[not found] ` <1381091235-18293-2-git-send-email-sre@debian.org>
2013-10-09 5:43 ` [RFCv3 1/7] ARM: OMAP2+: hwmod-data: Add SSI information Paul Walmsley
2013-10-10 14:19 ` Sebastian Reichel
2013-10-21 9:23 ` [RFCv3 0/7] OMAP SSI driver Sebastian Reichel
[not found] ` <1381091235-18293-8-git-send-email-sre@debian.org>
2013-10-22 12:48 ` Benoit Cousson [this message]
2013-10-22 14:44 ` [RFCv3 7/7] ARM: dts: N900: Add SSI information Sebastian Reichel
2013-10-22 15:26 ` Benoit Cousson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5266742D.9050604@baylibre.com \
--to=bcousson@baylibre$(echo .)com \
--cc=linux-arm-kernel@lists$(echo .)infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox