Subject: [PATCH 2/7] arm: dt: zynq: Add 'cpus' node

From: [email-masked] (Sudeep KarkadaNagesha)
Date: Mon, 11 Nov 2013 18:57:44 +0000

On 08/11/13 21:21, Soren Brinkmann wrote:
> Add a 'cpus' node to describe the CPU cores of Zynq.
> 
> Signed-off-by: Soren Brinkmann <[email-masked]>
> Acked-by: Peter Crosthwaite <[email-masked]>
> ---
>  arch/arm/boot/dts/zynq-7000.dtsi | 27 +++++++++++++++++++++++++++
>  1 file changed, 27 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/zynq-7000.dtsi b/arch/arm/boot/dts/zynq-7000.dtsi
> index 27ebc1ba9671..37fc04525142 100644
> --- a/arch/arm/boot/dts/zynq-7000.dtsi
> +++ b/arch/arm/boot/dts/zynq-7000.dtsi
> @@ -15,6 +15,33 @@
>  / {
>  	compatible = "xlnx,zynq-7000";
>  
> +	cpus {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		cpu at 0 {
> +			compatible = "arm,cortex-a9";
> +			device_type = "cpu";
> +			reg = <0>;
> +			clocks = <&clkc 3>;
> +			i-cache-size = <0x8000>;
> +			i-cache-line-size = <0x20>;
> +			d-cache-size = <0x8000>;
> +			d-cache-line-size = <0x20>;

These cache properties can be identified through CCSIDR(Cache Size ID Registers)
on ARMv7 Cortex implementations. It's better not to have these in DT if they can
be identified runtime.

Regards,
Sudeep