Subject: [PATCH V3 1/7] DRIVERS: IRQCHIP: IRQ-GIC: Add support for routable irqs

From: [email-masked] (Sricharan R)
Date: Wed, 13 Nov 2013 21:02:04 +0530

Hi,
On Wednesday 13 November 2013 08:54 PM, Santosh Shilimkar wrote:
> On Tuesday 05 November 2013 08:14 AM, Sricharan R wrote:
>> In some socs the gic can be preceded by a crossbar IP which
>> routes the peripheral interrupts to the gic inputs. The peripheral
>> interrupts are associated with a fixed crossbar input line and the
>> crossbar routes that to one of the free gic input line.
>>
>> The DT entries for peripherals provides the fixed crossbar input line
>> as its interrupt number and the mapping code should associate this with
>> a free gic input line. This patch adds the support inside the gic irqchip
>> to handle such routable irqs. The routable irqs are registered in a linear
>> domain. The registered routable domain's callback should be implemented
>> to get a free irq and to configure the IP to route it.
>>
>> Cc: Thomas Gleixner <[email-masked]>
>> Cc: Linus Walleij <[email-masked]>
>> Cc: Santosh Shilimkar <[email-masked]>
>> Cc: Russell King <[email-masked]>
>> Cc: Tony Lindgren <[email-masked]>
>> Cc: Rajendra Nayak <[email-masked]>
>> Cc: Marc Zyngier <[email-masked]>
>> Cc: Grant Likely <[email-masked]>
>> Cc: Rob Herring <[email-masked]>
>> Signed-off-by: Sricharan R <[email-masked]>
>> ---
> Acked-by: Santosh Shilimkar <[email-masked]>
Thanks Santosh. Will repost all with the minor changes suggested.

Regards,
 Sricharan