From: javier.martinez@collabora•co.uk (Javier Martinez Canillas)
To: linux-arm-kernel@lists•infradead.org
Subject: [PATCH 00/11]: add remaining support for IGEP boards
Date: Sat, 16 Nov 2013 15:41:09 +0100 [thread overview]
Message-ID: <52878405.6000109@collabora.co.uk> (raw)
In-Reply-To: <20131116141622.GE10317@atomide.com>
On 11/16/2013 03:16 PM, Tony Lindgren wrote:
> * Javier Martinez Canillas <javier.martinez@collabora•co.uk> [131116 05:25]:
>> In order to make mach-omap2 Device Tree only the board file for
>> IGEP boards was removed even when support for wifi and display
>> was still not supported by its DTS.
>>
>> This patch-set adds support for these remaining peripherals and
>> also adds support for USB, HDMI and user LED for the am33xx SoC
>> based IGEP Aquila board.
>>
>> The patch-set is composed of the following patches:
>>
>> Enric Balletbo i Serra (7):
>> ARM: dts: omap3-igep: Fix bus-width for mmc1.
>> ARM: dts: omap3-igep: Add support for LBEE1USJYC WiFi connected to SDIO.
>> ARM: dts: omap3-igep: Update to use the TI AM/DM37x processor.
>> ARM: dts: AM33XX BASE0033: add pinmux and hdmi node to enable display
>> ARM: dts: AM33XX BASE0033: add pinmux and user led support.
>> ARM: dts: AM33XX BASE0033: add 32KBit EEPROM support.
>> ARM: dts: AM33XX IGEP0033: add USB support.
>>
>> Javier Martinez Canillas (4):
>> ARM: dts: omap3-igep0020: Add pinmux setup for i2c devices
>> ARM: dts: omap3-igep0020: Add pinmuxing for DVI output
>> ARM: OMAP: dss-common: change IGEP's DVI DDC i2c bus
>> OMAPDSS: DPI: use VPLL2 regulator if VDDS_DSI is not found
>>
>> Tony,
>>
>> Most of these patches are just DTS changes so they have to be picked
>> by Benoit although there are patches that should go to different trees.
>>
>> [PATCH 10/11] ARM: OMAP: dss-common: change IGEP's DVI DDC i2c bus
>>
>> have to go through your tree and
>
> OK
>
>> [PATCH 11/11] OMAPDSS: DPI: use VPLL2 regulator if VDDS_DSI is not found
>>
>> should be picked by Tomi Valkeinen.
>
> That may not be needed as it can be set in the .dts file, I'll comment
> on that patch.
>
A similar hack is made for OMAP4 on dsi_regulator_init() to use the twl6030
VCXIO regulator if vdds_dsi is not found so I thought it makes sense to do
something similar for DPI and OMAP3.
But if you prefer I can add a regulator-name = "vdds_dsi" property to vpll2 like
you did for omap3-ldp.dts
>> Since we have removed the board file for IGEP boards I think these
>> can be considered as regression fixes for 3.13 although I don't mind
>> if you prefer to wait for 3.14.
>
> Yes I agree, let's try to fix these issues during the -rc cycle
> so the earlier functionality is maintained.
>
> Regards,
>
> Tony
>
Great, so you can drop [PATCH 11/11] and I'll send a follow up patch doing the
required regulator change in omap3-igep0020.dts.
Thanks a lot and best regards,
Javier
prev parent reply other threads:[~2013-11-16 14:41 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-11-16 13:23 [PATCH 00/11]: add remaining support for IGEP boards Javier Martinez Canillas
2013-11-16 13:23 ` [PATCH 01/11] ARM: dts: omap3-igep: Fix bus-width for mmc1 Javier Martinez Canillas
2013-11-16 13:23 ` [PATCH 02/11] ARM: dts: omap3-igep: Add support for LBEE1USJYC WiFi connected to SDIO Javier Martinez Canillas
2013-11-16 13:23 ` [PATCH 03/11] ARM: dts: omap3-igep: Update to use the TI AM/DM37x processor Javier Martinez Canillas
2013-11-16 14:44 ` Tony Lindgren
2013-11-16 15:19 ` Javier Martinez Canillas
2013-11-16 15:22 ` Tony Lindgren
2013-11-16 13:23 ` [PATCH 04/11] ARM: dts: omap3-igep0020: Add pinmux setup for i2c devices Javier Martinez Canillas
2013-11-16 13:23 ` [PATCH 05/11] ARM: dts: omap3-igep0020: Add pinmuxing for DVI output Javier Martinez Canillas
2013-11-16 13:23 ` [PATCH 06/11] ARM: dts: AM33XX BASE0033: add pinmux and hdmi node to enable display Javier Martinez Canillas
2013-11-16 13:23 ` [PATCH 07/11] ARM: dts: AM33XX BASE0033: add pinmux and user led support Javier Martinez Canillas
2013-11-16 13:23 ` [PATCH 08/11] ARM: dts: AM33XX BASE0033: add 32KBit EEPROM support Javier Martinez Canillas
2013-11-16 13:23 ` [PATCH 09/11] ARM: dts: AM33XX IGEP0033: add USB support Javier Martinez Canillas
2013-11-16 13:23 ` [PATCH 10/11] ARM: OMAP: dss-common: change IGEP's DVI DDC i2c bus Javier Martinez Canillas
2013-11-16 13:23 ` [PATCH 11/11] OMAPDSS: DPI: use VPLL2 regulator if VDDS_DSI is not found Javier Martinez Canillas
2013-11-16 14:18 ` Tony Lindgren
2013-11-16 15:34 ` Javier Martinez Canillas
2013-11-16 15:45 ` Tony Lindgren
2013-11-16 16:02 ` Sebastian Reichel
2013-11-16 17:28 ` Javier Martinez Canillas
2013-11-17 0:26 ` Sebastian Reichel
2013-11-17 1:06 ` Javier Martinez Canillas
2013-11-16 14:16 ` [PATCH 00/11]: add remaining support for IGEP boards Tony Lindgren
2013-11-16 14:41 ` Javier Martinez Canillas [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=52878405.6000109@collabora.co.uk \
--to=javier.martinez@collabora$(echo .)co.uk \
--cc=linux-arm-kernel@lists$(echo .)infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox