Subject: [PATCH 1/2] ARM: dts: omap4-panda-common: Fix pin muxing for wl12xx

From: [email-masked] (Balaji T K)
Date: Wed, 27 Nov 2013 21:34:31 +0530

On Thursday 21 November 2013 10:57 PM, Dan Murphy wrote:
> On 11/21/2013 10:58 AM, Tony Lindgren wrote:
>> * Balaji T K <[email-masked]> [131121 05:51]:
>>> pin mux wl12xx_gpio and wl12xx_pins should be part of omap4_pmx_core
>>> and not omap4_pmx_wkup. So, move wl12xx_* to omap4_pmx_core.
>>>
>>> Fix the following error message:
>>> pinctrl-single 4a31e040.pinmux: mux offset out of range: 0x38 (0x38)
>>> pinctrl-single 4a31e040.pinmux: could not add functions for pinmux_wl12xx_pins 56x
>
> Why is the led pins moved then?
Hi Dan,

I just moved 27 lines (wl12xx_pins, wl12xx_gpio) up, git diff generated smaller
diff stat by moving 10 line of code (led_wkgpio_pins) further down :-)

>
>>> SDIO card is not detected after moving pin mux to omap4_pmx_core since
>>> sdmmc5_clk pull is disabled. Enable Pull up on sdmmc5_clk to detect SDIO card.
>> Cool, does this fix the issue with the WLAN not coming up after a warm reset
>> on panda?
>>
>> Regards,
>>
>> Tony
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
>> the body of a message to majordomo at vger.kernel.org
>> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>
>