Subject: [PATCH v3 36/36] ARM: STi: Add support for the FSM Serial Flash Controller

From: [email-masked] (srinivas kandagatla)
Date: Mon, 2 Dec 2013 13:26:49 +0000

On 02/12/13 13:20, Lee Jones wrote:
>>> +		/* FSM */
>>> +		spifsm: spifsm at fe902000{
>>> +		        compatible         = "st,spi-fsm", "simple-bus";
>> "simple-bus" is redundant here.
> 
> Yes I agree, good spot.
> 
> I removed it from the Documentation, but missed this one.
> 
> If I remove it, can I add your Ack for the remainder of the patch?
Yes,

Acked-by: Srinivas Kandagatla <[email-masked]>

You should be aware that arch/arm/boot/dts/stih416-b2105.dts is not in
mainline yet.

Thanks,
srini

> 
>>> +		        reg                =  <0xfe902000 0x1000>;
>>> +		        reg-names          = "spi-fsm";
>>> +		        pinctrl-0          = <&pinctrl_fsm>;
>>> +
>>> +			st,syscfg	   = <&syscfg_rear>;
>>> +		        st,boot-device-reg = <0x958>;
>>> +		        st,boot-device-spi = <0x1a>;
>>> +
>>> +		        status = "okay";
>>> +		};
>