Subject: panda board es failed on cpuidle

From: [email-masked] (Alex Shi)
Date: Mon, 09 Dec 2013 17:54:54 +0800

my panda board ES failed to boot up when I use omap2plus_defconfig + CPU_IDLE.
Is it a known issue or I missed sth in kernel?

CONFIG_CPU_IDLE=y
# CONFIG_CPU_IDLE_MULTIPLE_DRIVERS is not set
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y
CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED=y

kernel hang after the following output.

    2.276641] omap_hsmmc 4809c000.mmc: pins are not configured from the driver
[    2.325531] pinctrl-single 4a31e040.pinmux: mux offset out of range: 0x38 (0x38)
[    2.333648] pinctrl-single 4a31e040.pinmux: could not add functions for pinmux_wl12xx_pins 56x
[    2.343231] omap-dma-engine 4a056000.dma-controller: allocating channel for 60
[    2.351043] omap-dma-engine 4a056000.dma-controller: allocating channel for 59
[    2.358917] 480d5000.mmc supply vmmc_aux not found, using dummy regulator
[    2.383331] hw-breakpoint: Failed to enable monitor mode on CPU 0.
[    2.390411] hw-breakpoint: CPU 0 failed to disable vector catch

-- 
Thanks
    Alex