Subject: [PATCH] ARM: clean-up common multi-platform kconfig options

From: [email-masked] (Michal Simek)
Date: Wed, 11 Dec 2013 17:41:55 +0100

On 12/05/2013 05:58 PM, Rob Herring wrote:
> From: Rob Herring <[email-masked]>
> 
> Multi-platform requires various kconfig options to be selected, so
> platforms don't need to select them individually.
> 
> A few more options could be selected because they are either on nearly
> every platform or they just enable other kconfig options to be visible:
> 
> select ARM_AMBA
> select ARM_GIC if CPU_V7
> select HAVE_SMP if CPU_V7
> select MIGHT_HAVE_CACHE_L2X0 if ARCH_MULTI_V6_V7
> select ARCH_HAS_CPUFREQ
> select ARCH_HAS_OPP
> 
> Signed-off-by: Rob Herring <[email-masked]>
> Cc: Linus Walleij <[email-masked]>
> ---
>  arch/arm/Kconfig                |  2 ++
>  arch/arm/mach-bcm/Kconfig       |  5 -----
>  arch/arm/mach-bcm2835/Kconfig   |  4 ----
>  arch/arm/mach-cns3xxx/Kconfig   |  1 -
>  arch/arm/mach-highbank/Kconfig  |  6 ------
>  arch/arm/mach-imx/Kconfig       | 12 ------------
>  arch/arm/mach-keystone/Kconfig  |  3 ---
>  arch/arm/mach-mvebu/Kconfig     |  5 -----
>  arch/arm/mach-mxs/Kconfig       |  4 ----
>  arch/arm/mach-nomadik/Kconfig   |  5 -----
>  arch/arm/mach-nspire/Kconfig    |  5 -----
>  arch/arm/mach-omap2/Kconfig     | 16 ----------------
>  arch/arm/mach-picoxcell/Kconfig |  4 ----
>  arch/arm/mach-prima2/Kconfig    |  4 ----
>  arch/arm/mach-rockchip/Kconfig  |  2 --
>  arch/arm/mach-shmobile/Kconfig  |  3 ---
>  arch/arm/mach-socfpga/Kconfig   |  5 -----
>  arch/arm/mach-spear/Kconfig     |  8 --------
>  arch/arm/mach-sunxi/Kconfig     |  4 ----
>  arch/arm/mach-tegra/Kconfig     |  6 ------
>  arch/arm/mach-u300/Kconfig      |  6 ------
>  arch/arm/mach-ux500/Kconfig     |  3 ---
>  arch/arm/mach-vexpress/Kconfig  |  3 ---
>  arch/arm/mach-virt/Kconfig      |  4 ----
>  arch/arm/mach-vt8500/Kconfig    |  4 ----
>  arch/arm/mach-zynq/Kconfig      |  5 -----
>  26 files changed, 2 insertions(+), 127 deletions(-)
> 
> diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
> index c1f1a7e..d871bdd 100644
> --- a/arch/arm/Kconfig
> +++ b/arch/arm/Kconfig
> @@ -302,9 +302,11 @@ choice
>  config ARCH_MULTIPLATFORM
>  	bool "Allow multiple platforms to be selected"
>  	depends on MMU
> +	select ARCH_WANT_OPTIONAL_GPIOLIB
>  	select ARM_PATCH_PHYS_VIRT
>  	select AUTO_ZRELADDR
>  	select COMMON_CLK
> +	select GENERIC_CLOCKEVENTS
>  	select MULTI_IRQ_HANDLER
>  	select SPARSE_IRQ
>  	select USE_OF
> diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig
> index 9fe6d88..6a58980 100644
> --- a/arch/arm/mach-bcm/Kconfig
> +++ b/arch/arm/mach-bcm/Kconfig
> @@ -16,12 +16,7 @@ config ARCH_BCM_MOBILE
>  	select ARM_ERRATA_754322
>  	select ARM_ERRATA_764369 if SMP
>  	select ARM_GIC
> -	select CPU_V7
> -	select CLKSRC_OF
> -	select GENERIC_CLOCKEVENTS
> -	select GENERIC_TIME
>  	select GPIO_BCM_KONA
> -	select SPARSE_IRQ
>  	select TICK_ONESHOT
>  	select CACHE_L2X0
>  	select HAVE_ARM_ARCH_TIMER
> diff --git a/arch/arm/mach-bcm2835/Kconfig b/arch/arm/mach-bcm2835/Kconfig
> index 560045ca..acea0d8 100644
> --- a/arch/arm/mach-bcm2835/Kconfig
> +++ b/arch/arm/mach-bcm2835/Kconfig
> @@ -4,10 +4,6 @@ config ARCH_BCM2835
>  	select ARM_AMBA
>  	select ARM_ERRATA_411920
>  	select ARM_TIMER_SP804
> -	select CLKDEV_LOOKUP
> -	select CLKSRC_OF
> -	select CPU_V6
> -	select GENERIC_CLOCKEVENTS
>  	select PINCTRL
>  	select PINCTRL_BCM2835
>  	help
> diff --git a/arch/arm/mach-cns3xxx/Kconfig b/arch/arm/mach-cns3xxx/Kconfig
> index dbf0df8..e346688 100644
> --- a/arch/arm/mach-cns3xxx/Kconfig
> +++ b/arch/arm/mach-cns3xxx/Kconfig
> @@ -2,7 +2,6 @@ config ARCH_CNS3XXX
>  	bool "Cavium Networks CNS3XXX family" if ARCH_MULTI_V6
>  	select ARM_GIC
>  	select CPU_V6K
> -	select GENERIC_CLOCKEVENTS
>  	select MIGHT_HAVE_CACHE_L2X0
>  	select MIGHT_HAVE_PCI
>  	select PCI_DOMAINS if PCI
> diff --git a/arch/arm/mach-highbank/Kconfig b/arch/arm/mach-highbank/Kconfig
> index 0aded64..59274a7 100644
> --- a/arch/arm/mach-highbank/Kconfig
> +++ b/arch/arm/mach-highbank/Kconfig
> @@ -5,7 +5,6 @@ config ARCH_HIGHBANK
>  	select ARCH_HAS_HOLES_MEMORYMODEL
>  	select ARCH_HAS_OPP
>  	select ARCH_SUPPORTS_BIG_ENDIAN
> -	select ARCH_WANT_OPTIONAL_GPIOLIB
>  	select ARM_AMBA
>  	select ARM_ERRATA_764369 if SMP
>  	select ARM_ERRATA_775420
> @@ -14,14 +13,9 @@ config ARCH_HIGHBANK
>  	select ARM_PSCI
>  	select ARM_TIMER_SP804
>  	select CACHE_L2X0
> -	select COMMON_CLK
> -	select CPU_V7
> -	select GENERIC_CLOCKEVENTS
>  	select HAVE_ARM_SCU
>  	select HAVE_ARM_TWD if SMP
>  	select HAVE_SMP
>  	select MAILBOX
>  	select PL320_MBOX
> -	select SPARSE_IRQ
> -	select USE_OF
>  	select ZONE_DMA if ARM_LPAE
> diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
> index 7a6e6f7..5052c18 100644
> --- a/arch/arm/mach-imx/Kconfig
> +++ b/arch/arm/mach-imx/Kconfig
> @@ -2,18 +2,11 @@ config ARCH_MXC
>  	bool "Freescale i.MX family" if ARCH_MULTI_V4_V5 || ARCH_MULTI_V6_V7
>  	select ARCH_REQUIRE_GPIOLIB
>  	select ARM_CPU_SUSPEND if PM
> -	select ARM_PATCH_PHYS_VIRT
> -	select AUTO_ZRELADDR if !ZBOOT_ROM
>  	select CLKSRC_MMIO
> -	select COMMON_CLK
>  	select GENERIC_ALLOCATOR
> -	select GENERIC_CLOCKEVENTS
>  	select GENERIC_IRQ_CHIP
>  	select MIGHT_HAVE_CACHE_L2X0 if ARCH_MULTI_V6_V7
> -	select MULTI_IRQ_HANDLER
>  	select SOC_BUS
> -	select SPARSE_IRQ
> -	select USE_OF
>  	help
>  	  Support for Freescale MXC/iMX-based family of processors
>  
> @@ -139,7 +132,6 @@ config SOC_IMX5
>  	select ARCH_HAS_CPUFREQ
>  	select ARCH_HAS_OPP
>  	select ARCH_MXC_IOMUX_V3
> -	select CPU_V7
>  	select MXC_TZIC
>  
>  config	SOC_IMX51
> @@ -785,7 +777,6 @@ config SOC_IMX6Q
>  	select ARM_ERRATA_764369 if SMP
>  	select ARM_ERRATA_775420
>  	select ARM_GIC
> -	select CPU_V7
>  	select HAVE_ARM_SCU if SMP
>  	select HAVE_ARM_TWD if SMP
>  	select HAVE_IMX_ANATOP
> @@ -811,7 +802,6 @@ config SOC_IMX6SL
>  	select ARM_ERRATA_754322
>  	select ARM_ERRATA_775420
>  	select ARM_GIC
> -	select CPU_V7
>  	select HAVE_IMX_ANATOP
>  	select HAVE_IMX_GPC
>  	select HAVE_IMX_MMDC
> @@ -828,9 +818,7 @@ config SOC_IMX6SL
>  
>  config SOC_VF610
>  	bool "Vybrid Family VF610 support"
> -	select CPU_V7
>  	select ARM_GIC
> -	select CLKSRC_OF
>  	select PINCTRL
>  	select PINCTRL_VF610
>  	select VF_PIT_TIMER
> diff --git a/arch/arm/mach-keystone/Kconfig b/arch/arm/mach-keystone/Kconfig
> index f20c53e..ea35853 100644
> --- a/arch/arm/mach-keystone/Kconfig
> +++ b/arch/arm/mach-keystone/Kconfig
> @@ -1,13 +1,10 @@
>  config ARCH_KEYSTONE
>  	bool "Texas Instruments Keystone Devices"
>  	depends on ARCH_MULTI_V7
> -	select CPU_V7
>  	select ARM_GIC
>  	select HAVE_ARM_ARCH_TIMER
>  	select HAVE_SMP
>  	select CLKSRC_MMIO
> -	select GENERIC_CLOCKEVENTS
> -	select ARCH_WANT_OPTIONAL_GPIOLIB
>  	select ARM_ERRATA_798181 if SMP
>  	select COMMON_CLK_KEYSTONE
>  	select TI_EDMA
> diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig
> index 5e269d7..d581e84 100644
> --- a/arch/arm/mach-mvebu/Kconfig
> +++ b/arch/arm/mach-mvebu/Kconfig
> @@ -2,15 +2,10 @@ config ARCH_MVEBU
>  	bool "Marvell SOCs with Device Tree support" if ARCH_MULTI_V7
>  	select ARCH_SUPPORTS_BIG_ENDIAN
>  	select CLKSRC_MMIO
> -	select COMMON_CLK
> -	select GENERIC_CLOCKEVENTS
>  	select GENERIC_IRQ_CHIP
>  	select IRQ_DOMAIN
> -	select MULTI_IRQ_HANDLER
>  	select PINCTRL
>  	select PLAT_ORION
> -	select SPARSE_IRQ
> -	select CLKDEV_LOOKUP
>  	select MVEBU_MBUS
>  	select ZONE_DMA if ARM_LPAE
>  	select ARCH_REQUIRE_GPIOLIB
> diff --git a/arch/arm/mach-mxs/Kconfig b/arch/arm/mach-mxs/Kconfig
> index 8cde9e0..8479413 100644
> --- a/arch/arm/mach-mxs/Kconfig
> +++ b/arch/arm/mach-mxs/Kconfig
> @@ -16,11 +16,7 @@ config ARCH_MXS
>  	bool "Freescale MXS (i.MX23, i.MX28) support"
>  	depends on ARCH_MULTI_V5
>  	select ARCH_REQUIRE_GPIOLIB
> -	select CLKDEV_LOOKUP
>  	select CLKSRC_MMIO
> -	select CLKSRC_OF
> -	select GENERIC_CLOCKEVENTS
> -	select HAVE_CLK_PREPARE
>  	select PINCTRL
>  	select SOC_BUS
>  	select SOC_IMX23
> diff --git a/arch/arm/mach-nomadik/Kconfig b/arch/arm/mach-nomadik/Kconfig
> index 4d42da4..486d301 100644
> --- a/arch/arm/mach-nomadik/Kconfig
> +++ b/arch/arm/mach-nomadik/Kconfig
> @@ -6,16 +6,11 @@ config ARCH_NOMADIK
>  	select ARM_VIC
>  	select CLKSRC_NOMADIK_MTU
>  	select CLKSRC_NOMADIK_MTU_SCHED_CLOCK
> -	select CLKSRC_OF
> -	select COMMON_CLK
>  	select CPU_ARM926T
> -	select GENERIC_CLOCKEVENTS
>  	select MIGHT_HAVE_CACHE_L2X0
>  	select PINCTRL
>  	select PINCTRL_NOMADIK
>  	select PINCTRL_STN8815
> -	select SPARSE_IRQ
> -	select USE_OF
>  	help
>  	  Support for the Nomadik platform by ST-Ericsson
>  
> diff --git a/arch/arm/mach-nspire/Kconfig b/arch/arm/mach-nspire/Kconfig
> index 59d8f0a..bc41f26 100644
> --- a/arch/arm/mach-nspire/Kconfig
> +++ b/arch/arm/mach-nspire/Kconfig
> @@ -3,14 +3,9 @@ config ARCH_NSPIRE
>  	depends on ARCH_MULTI_V4_V5
>  	depends on MMU
>  	select CPU_ARM926T
> -	select COMMON_CLK
> -	select GENERIC_CLOCKEVENTS
>  	select GENERIC_IRQ_CHIP
> -	select SPARSE_IRQ
>  	select ARM_AMBA
>  	select ARM_VIC
>  	select ARM_TIMER_SP804
> -	select USE_OF
> -	select CLKSRC_OF
>  	help
>  	  This enables support for systems using the TI-NSPIRE CPU
> diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
> index dc21df1..c128792 100644
> --- a/arch/arm/mach-omap2/Kconfig
> +++ b/arch/arm/mach-omap2/Kconfig
> @@ -5,8 +5,6 @@ config ARCH_OMAP2
>  	bool "TI OMAP2"
>  	depends on ARCH_MULTI_V6
>  	select ARCH_OMAP2PLUS
> -	select CPU_V6
> -	select MULTI_IRQ_HANDLER
>  	select SOC_HAS_OMAP2_SDRC
>  
>  config ARCH_OMAP3
> @@ -15,8 +13,6 @@ config ARCH_OMAP3
>  	select ARCH_OMAP2PLUS
>  	select ARCH_HAS_OPP
>  	select ARM_CPU_SUSPEND if PM
> -	select CPU_V7
> -	select MULTI_IRQ_HANDLER
>  	select OMAP_INTERCONNECT
>  	select PM_OPP if PM
>  	select PM_RUNTIME if CPU_IDLE
> @@ -33,7 +29,6 @@ config ARCH_OMAP4
>  	select ARM_ERRATA_720789
>  	select ARM_GIC
>  	select CACHE_L2X0
> -	select CPU_V7
>  	select HAVE_ARM_SCU if SMP
>  	select HAVE_ARM_TWD if SMP
>  	select HAVE_SMP
> @@ -52,7 +47,6 @@ config SOC_OMAP5
>  	select ARCH_OMAP2PLUS
>  	select ARM_CPU_SUSPEND if PM
>  	select ARM_GIC
> -	select CPU_V7
>  	select HAVE_ARM_SCU if SMP
>  	select HAVE_ARM_TWD if LOCAL_TIMERS
>  	select HAVE_SMP
> @@ -64,15 +58,11 @@ config SOC_AM33XX
>  	depends on ARCH_MULTI_V7
>  	select ARCH_OMAP2PLUS
>  	select ARM_CPU_SUSPEND if PM
> -	select CPU_V7
> -	select MULTI_IRQ_HANDLER
>  
>  config SOC_AM43XX
>  	bool "TI AM43x"
>  	depends on ARCH_MULTI_V7
> -	select CPU_V7
>  	select ARCH_OMAP2PLUS
> -	select MULTI_IRQ_HANDLER
>  	select ARM_GIC
>  	select MACH_OMAP_GENERIC
>  
> @@ -84,17 +74,13 @@ config ARCH_OMAP2PLUS
>  	select ARCH_OMAP
>  	select ARCH_REQUIRE_GPIOLIB
>  	select CLKSRC_MMIO
> -	select COMMON_CLK
> -	select GENERIC_CLOCKEVENTS
>  	select GENERIC_IRQ_CHIP
>  	select MACH_OMAP_GENERIC
>  	select OMAP_DM_TIMER
>  	select PINCTRL
>  	select PROC_DEVICETREE if PROC_FS
>  	select SOC_BUS
> -	select SPARSE_IRQ
>  	select TI_PRIV_EDMA
> -	select USE_OF
>  	help
>  	  Systems based on OMAP2, OMAP3, OMAP4 or OMAP5
>  
> @@ -131,10 +117,8 @@ config SOC_HAS_REALTIME_COUNTER
>  config SOC_DRA7XX
>  	bool "TI DRA7XX"
>  	select ARM_ARCH_TIMER
> -	select CPU_V7
>  	select ARM_GIC
>  	select HAVE_SMP
> -	select COMMON_CLK
>  
>  comment "OMAP Core Type"
>  	depends on ARCH_OMAP2
> diff --git a/arch/arm/mach-picoxcell/Kconfig b/arch/arm/mach-picoxcell/Kconfig
> index b1022f4..c88ff74 100644
> --- a/arch/arm/mach-picoxcell/Kconfig
> +++ b/arch/arm/mach-picoxcell/Kconfig
> @@ -1,12 +1,8 @@
>  config ARCH_PICOXCELL
>  	bool "Picochip PicoXcell" if ARCH_MULTI_V6
>  	select ARCH_REQUIRE_GPIOLIB
> -	select ARM_PATCH_PHYS_VIRT
>  	select ARM_VIC
>  	select CPU_V6K
>  	select DW_APB_TIMER_OF
> -	select GENERIC_CLOCKEVENTS
>  	select HAVE_TCM
>  	select NO_IOPORT
> -	select SPARSE_IRQ
> -	select USE_OF
> diff --git a/arch/arm/mach-prima2/Kconfig b/arch/arm/mach-prima2/Kconfig
> index 6988b11..16c2d90 100644
> --- a/arch/arm/mach-prima2/Kconfig
> +++ b/arch/arm/mach-prima2/Kconfig
> @@ -1,7 +1,6 @@
>  config ARCH_SIRF
>  	bool "CSR SiRF" if ARCH_MULTI_V7
>  	select ARCH_REQUIRE_GPIOLIB
> -	select GENERIC_CLOCKEVENTS
>  	select GENERIC_IRQ_CHIP
>  	select MIGHT_HAVE_CACHE_L2X0
>  	select NO_IOPORT
> @@ -17,7 +16,6 @@ menu "CSR SiRF atlas6/primaII/Marco/Polo Specific Features"
>  config ARCH_ATLAS6
>  	bool "CSR SiRFSoC ATLAS6 ARM Cortex A9 Platform"
>  	default y
> -	select CPU_V7
>  	select SIRF_IRQ
>  	help
>            Support for CSR SiRFSoC ARM Cortex A9 Platform
> @@ -25,7 +23,6 @@ config ARCH_ATLAS6
>  config ARCH_PRIMA2
>  	bool "CSR SiRFSoC PRIMA2 ARM Cortex A9 Platform"
>  	default y
> -	select CPU_V7
>  	select SIRF_IRQ
>  	select ZONE_DMA
>  	help
> @@ -35,7 +32,6 @@ config ARCH_MARCO
>  	bool "CSR SiRFSoC MARCO ARM Cortex A9 Platform"
>  	default y
>  	select ARM_GIC
> -	select CPU_V7
>  	select HAVE_ARM_SCU if SMP
>  	select HAVE_SMP
>  	select SMP_ON_UP if SMP
> diff --git a/arch/arm/mach-rockchip/Kconfig b/arch/arm/mach-rockchip/Kconfig
> index cf073de..2a695bc 100644
> --- a/arch/arm/mach-rockchip/Kconfig
> +++ b/arch/arm/mach-rockchip/Kconfig
> @@ -7,8 +7,6 @@ config ARCH_ROCKCHIP
>  	select CACHE_L2X0
>  	select HAVE_ARM_TWD if SMP
>  	select HAVE_SMP
> -	select COMMON_CLK
> -	select GENERIC_CLOCKEVENTS
>  	select DW_APB_TIMER_OF
>  	select ARM_GLOBAL_TIMER
>  	select CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK
> diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
> index a4a4b75..de75560 100644
> --- a/arch/arm/mach-shmobile/Kconfig
> +++ b/arch/arm/mach-shmobile/Kconfig
> @@ -1,8 +1,6 @@
>  config ARCH_SHMOBILE_MULTI
>  	bool "SH-Mobile Series" if ARCH_MULTI_V7
>  	depends on MMU
> -	select CPU_V7
> -	select GENERIC_CLOCKEVENTS
>  	select HAVE_ARM_SCU if SMP
>  	select HAVE_ARM_TWD if LOCAL_TIMERS
>  	select HAVE_SMP
> @@ -11,7 +9,6 @@ config ARCH_SHMOBILE_MULTI
>  	select NO_IOPORT
>  	select PINCTRL
>  	select ARCH_REQUIRE_GPIOLIB
> -	select CLKDEV_LOOKUP
>  
>  if ARCH_SHMOBILE_MULTI
>  
> diff --git a/arch/arm/mach-socfpga/Kconfig b/arch/arm/mach-socfpga/Kconfig
> index 037100a..57e11cd 100644
> --- a/arch/arm/mach-socfpga/Kconfig
> +++ b/arch/arm/mach-socfpga/Kconfig
> @@ -4,13 +4,8 @@ config ARCH_SOCFPGA
>  	select ARM_AMBA
>  	select ARM_GIC
>  	select CACHE_L2X0
> -	select COMMON_CLK
> -	select CPU_V7
>  	select DW_APB_TIMER_OF
> -	select GENERIC_CLOCKEVENTS
>  	select GPIO_PL061 if GPIOLIB
>  	select HAVE_ARM_SCU
>  	select HAVE_SMP
>  	select MFD_SYSCON
> -	select SPARSE_IRQ
> -	select USE_OF
> diff --git a/arch/arm/mach-spear/Kconfig b/arch/arm/mach-spear/Kconfig
> index ac1710e6..a7a28ea 100644
> --- a/arch/arm/mach-spear/Kconfig
> +++ b/arch/arm/mach-spear/Kconfig
> @@ -8,8 +8,6 @@ menuconfig PLAT_SPEAR
>  	select ARCH_REQUIRE_GPIOLIB
>  	select ARM_AMBA
>  	select CLKSRC_MMIO
> -	select COMMON_CLK
> -	select GENERIC_CLOCKEVENTS
>  
>  if PLAT_SPEAR
>  
> @@ -18,14 +16,12 @@ config ARCH_SPEAR13XX
>  	depends on ARCH_MULTI_V7 || PLAT_SPEAR_SINGLE
>  	select ARCH_HAS_CPUFREQ
>  	select ARM_GIC
> -	select CPU_V7
>  	select GPIO_SPEAR_SPICS
>  	select HAVE_ARM_SCU if SMP
>  	select HAVE_ARM_TWD if SMP
>  	select HAVE_SMP
>  	select MIGHT_HAVE_CACHE_L2X0
>  	select PINCTRL
> -	select USE_OF
>  	help
>  	  Supports for ARM's SPEAR13XX family
>  
> @@ -50,9 +46,7 @@ config ARCH_SPEAR3XX
>  	depends on ARCH_MULTI_V5 || PLAT_SPEAR_SINGLE
>  	depends on !ARCH_SPEAR13XX
>  	select ARM_VIC
> -	select CPU_ARM926T
>  	select PINCTRL
> -	select USE_OF
>  	help
>  	  Supports for ARM's SPEAR3XX family
>  
> @@ -83,14 +77,12 @@ config ARCH_SPEAR6XX
>  	depends on ARCH_MULTI_V5 || PLAT_SPEAR_SINGLE
>  	depends on !ARCH_SPEAR13XX
>  	select ARM_VIC
> -	select CPU_ARM926T
>  	help
>  	  Supports for ARM's SPEAR6XX family
>  
>  config MACH_SPEAR600
>  	def_bool y
>  	depends on ARCH_SPEAR6XX
> -	select USE_OF
>  	help
>  	  Supports ST SPEAr600 boards configured via the device-treesource "arch/arm/mach-spear6xx/Kconfig"
>  
> diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig
> index c9e72c8..ade43c9 100644
> --- a/arch/arm/mach-sunxi/Kconfig
> +++ b/arch/arm/mach-sunxi/Kconfig
> @@ -3,12 +3,8 @@ config ARCH_SUNXI
>  	select ARCH_REQUIRE_GPIOLIB
>  	select ARM_GIC
>  	select CLKSRC_MMIO
> -	select CLKSRC_OF
> -	select COMMON_CLK
> -	select GENERIC_CLOCKEVENTS
>  	select GENERIC_IRQ_CHIP
>  	select HAVE_SMP
>  	select PINCTRL
>  	select PINCTRL_SUNXI
> -	select SPARSE_IRQ
>  	select SUN4I_TIMER
> diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig
> index 09e740f..8f97cf0 100644
> --- a/arch/arm/mach-tegra/Kconfig
> +++ b/arch/arm/mach-tegra/Kconfig
> @@ -4,10 +4,6 @@ config ARCH_TEGRA
>  	select ARCH_REQUIRE_GPIOLIB
>  	select ARM_GIC
>  	select CLKSRC_MMIO
> -	select CLKSRC_OF
> -	select COMMON_CLK
> -	select CPU_V7
> -	select GENERIC_CLOCKEVENTS
>  	select HAVE_ARM_SCU if SMP
>  	select HAVE_ARM_TWD if SMP
>  	select HAVE_SMP
> @@ -15,11 +11,9 @@ config ARCH_TEGRA
>  	select MIGHT_HAVE_PCI
>  	select PINCTRL
>  	select SOC_BUS
> -	select SPARSE_IRQ
>  	select USB_ARCH_HAS_EHCI if USB_SUPPORT
>  	select USB_ULPI if USB_PHY
>  	select USB_ULPI_VIEWPORT if USB_PHY
> -	select USE_OF
>  	help
>  	  This enables support for NVIDIA Tegra based systems.
>  
> diff --git a/arch/arm/mach-u300/Kconfig b/arch/arm/mach-u300/Kconfig
> index 8e23071..e3a96d7 100644
> --- a/arch/arm/mach-u300/Kconfig
> +++ b/arch/arm/mach-u300/Kconfig
> @@ -3,20 +3,14 @@ config ARCH_U300
>  	depends on MMU
>  	select ARCH_REQUIRE_GPIOLIB
>  	select ARM_AMBA
> -	select ARM_PATCH_PHYS_VIRT
>  	select ARM_VIC
>  	select CLKSRC_MMIO
> -	select CLKSRC_OF
> -	select COMMON_CLK
>  	select CPU_ARM926T
> -	select GENERIC_CLOCKEVENTS
>  	select HAVE_TCM
>  	select PINCTRL
>  	select PINCTRL_COH901
>  	select PINCTRL_U300
> -	select SPARSE_IRQ
>  	select MFD_SYSCON
> -	select USE_OF
>  	help
>  	  Support for ST-Ericsson U300 series mobile platforms.
>  
> diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig
> index 0034d2c..5292f7b 100644
> --- a/arch/arm/mach-ux500/Kconfig
> +++ b/arch/arm/mach-ux500/Kconfig
> @@ -11,9 +11,6 @@ config ARCH_U8500
>  	select ARM_GIC
>  	select CACHE_L2X0
>  	select CLKSRC_NOMADIK_MTU
> -	select COMMON_CLK
> -	select CPU_V7
> -	select GENERIC_CLOCKEVENTS
>  	select HAVE_ARM_SCU if SMP
>  	select HAVE_ARM_TWD if SMP
>  	select HAVE_SMP
> diff --git a/arch/arm/mach-vexpress/Kconfig b/arch/arm/mach-vexpress/Kconfig
> index 4a70be4..fa29222 100644
> --- a/arch/arm/mach-vexpress/Kconfig
> +++ b/arch/arm/mach-vexpress/Kconfig
> @@ -5,10 +5,7 @@ config ARCH_VEXPRESS
>  	select ARM_AMBA
>  	select ARM_GIC
>  	select ARM_TIMER_SP804
> -	select COMMON_CLK
>  	select COMMON_CLK_VERSATILE
> -	select CPU_V7
> -	select GENERIC_CLOCKEVENTS
>  	select HAVE_ARM_SCU if SMP
>  	select HAVE_ARM_TWD if SMP
>  	select HAVE_PATA_PLATFORM
> diff --git a/arch/arm/mach-virt/Kconfig b/arch/arm/mach-virt/Kconfig
> index 081d469..eaad072 100644
> --- a/arch/arm/mach-virt/Kconfig
> +++ b/arch/arm/mach-virt/Kconfig
> @@ -1,10 +1,6 @@
>  config ARCH_VIRT
>  	bool "Dummy Virtual Machine" if ARCH_MULTI_V7
> -	select ARCH_WANT_OPTIONAL_GPIOLIB
>  	select ARM_GIC
>  	select HAVE_ARM_ARCH_TIMER
>  	select ARM_PSCI
>  	select HAVE_SMP
> -	select CPU_V7
> -	select SPARSE_IRQ
> -	select USE_OF
> diff --git a/arch/arm/mach-vt8500/Kconfig b/arch/arm/mach-vt8500/Kconfig
> index 927be93..08f56a4 100644
> --- a/arch/arm/mach-vt8500/Kconfig
> +++ b/arch/arm/mach-vt8500/Kconfig
> @@ -3,8 +3,6 @@ config ARCH_VT8500
>  	select ARCH_HAS_CPUFREQ
>  	select ARCH_REQUIRE_GPIOLIB
>  	select CLKDEV_LOOKUP
> -	select CLKSRC_OF
> -	select GENERIC_CLOCKEVENTS
>  	select VT8500_TIMER
>  	select PINCTRL
>  	help
> @@ -21,7 +19,6 @@ config ARCH_WM8750
>  	bool "WonderMedia WM8750"
>  	depends on ARCH_MULTI_V6
>  	select ARCH_VT8500
> -	select CPU_V6
>  	help
>  	  Support for WonderMedia WM8750 System-on-Chip.
>  
> @@ -29,6 +26,5 @@ config ARCH_WM8850
>  	bool "WonderMedia WM8850"
>  	depends on ARCH_MULTI_V7
>  	select ARCH_VT8500
> -	select CPU_V7
>  	help
>  	  Support for WonderMedia WM8850 System-on-Chip.
> diff --git a/arch/arm/mach-zynq/Kconfig b/arch/arm/mach-zynq/Kconfig
> index 6b04260..85d1805 100644
> --- a/arch/arm/mach-zynq/Kconfig
> +++ b/arch/arm/mach-zynq/Kconfig
> @@ -2,16 +2,11 @@ config ARCH_ZYNQ
>  	bool "Xilinx Zynq ARM Cortex A9 Platform" if ARCH_MULTI_V7
>  	select ARM_AMBA
>  	select ARM_GIC
> -	select COMMON_CLK
> -	select CPU_V7
> -	select GENERIC_CLOCKEVENTS
>  	select HAVE_ARM_SCU if SMP
>  	select HAVE_ARM_TWD if SMP
>  	select ICST
>  	select MIGHT_HAVE_CACHE_L2X0
> -	select USE_OF
>  	select HAVE_SMP
> -	select SPARSE_IRQ
>  	select CADENCE_TTC_TIMER
>  	select ARM_GLOBAL_TIMER
>  	help
> 

For zynq:
Reviewed by: Michal Simek <[email-masked]>

Thanks,
Michal

-- 
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel - Microblaze cpu - http://www.monstr.eu/fdt/
Maintainer of Linux kernel - Xilinx Zynq ARM architecture
Microblaze U-BOOT custodian and responsible for u-boot arm zynq platform

-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 263 bytes
Desc: OpenPGP digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20131211/4677100a/attachment-0001.sig>