Subject: [PATCH 0/6] mmc: sdhci-s3c: Fix base clock source management

From: [email-masked] (Jaehoon Chung)
Date: Mon, 13 Jan 2014 14:47:19 +0900

Hi, All.

On 01/13/2014 06:18 AM, Heiko St?bner wrote:
> Am Samstag, 11. Januar 2014, 22:39:00 schrieb Tomasz Figa:
>> Tested on S3C6410-based Mini6410 board, with following performance
>> figures:
>>
>> * Before this series (133 MHz HCLK always selected, leading to at most
>>   33 MHz card clock):
>>
>> root at tiny6410:~# hdparm -t /dev/mmcblk0
>>
>> /dev/mmcblk0:
>>  Timing buffered disk reads:  42 MB in  3.10 seconds =  13.54 MB/sec
> 
> # hdparm -t /dev/mmcblk0
> 
> /dev/mmcblk0:
>  Timing buffered disk reads: 44 MB in  3.12 seconds =  14.11 MB/sec

/dev/mmcblk0:
 Timing buffered disk reads:  38 MB in  3.14 seconds =  12.12 MB/sec
> 
> 
>> * After this series (48 MHz EPLL clock selected, leading to 48 MHz card
>>   clock):
>>
>> root at tiny6410:~# hdparm -t /dev/mmcblk0
>>
>> /dev/mmcblk0:
>>  Timing buffered disk reads:  56 MB in  3.04 seconds =  18.41 MB/sec
> 
> # hdparm -t /dev/mmcblk0
> 
> /dev/mmcblk0:
>  Timing buffered disk reads: 48 MB in  3.01 seconds =  15.94 MB/sec

 /dev/mmcblk0:
 Timing buffered disk reads:  56 MB in  3.05 seconds =  18.35 MB/sec
> 
> 
> So on a s3c2416:
> Tested-by: Heiko Stuebner <[email-masked]>
> Acked-by: Heiko Stuebner <[email-masked]>

Tested with exynos4 board.

Tested-by: Jaehoon Chung <[email-masked]>
Acked-by; Jaehoon Chung <[email-masked]>

Best Regards,
Jaehoon Chung

> 
> 
> Thanks for the added bandwidth :-)
> Heiko
> 
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
>