Subject: [PATCH v3 6/6] ARM: dts: AM33XX: Add ecap interrupt properties

From: [email-masked] (Jonathan Cameron)
Date: Sat, 15 Feb 2014 11:43:43 +0000

On 05/02/14 19:01, Matt Porter wrote:
> Add missing interrupt properties to the ecap0, ecap1, and ecap2
> nodes.
>
> Signed-off-by: Matt Porter <[email-masked]>
This one is unconnected from the rest of the series really so should go
into the relevant arch tree whenever it make sense.

Jonathan
> ---
>   arch/arm/boot/dts/am33xx.dtsi | 6 ++++++
>   1 file changed, 6 insertions(+)
>
> diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
> index 6d95d3d..b4139ba 100644
> --- a/arch/arm/boot/dts/am33xx.dtsi
> +++ b/arch/arm/boot/dts/am33xx.dtsi
> @@ -582,6 +582,8 @@
>   				compatible = "ti,am33xx-ecap";
>   				#pwm-cells = <3>;
>   				reg = <0x48300100 0x80>;
> +				interrupts = <31>;
> +				interrupt-names = "ecap0";
>   				ti,hwmods = "ecap0";
>   				status = "disabled";
>   			};
> @@ -610,6 +612,8 @@
>   				compatible = "ti,am33xx-ecap";
>   				#pwm-cells = <3>;
>   				reg = <0x48302100 0x80>;
> +				interrupts = <47>;
> +				interrupt-names = "ecap1";
>   				ti,hwmods = "ecap1";
>   				status = "disabled";
>   			};
> @@ -638,6 +642,8 @@
>   				compatible = "ti,am33xx-ecap";
>   				#pwm-cells = <3>;
>   				reg = <0x48304100 0x80>;
> +				interrupts = <61>;
> +				interrupt-names = "ecap2";
>   				ti,hwmods = "ecap2";
>   				status = "disabled";
>   			};
>