From: kgene.kim@samsung•com (Kukjin Kim)
To: linux-arm-kernel@lists•infradead.org
Subject: [PATCH] ARM: dts: add max77686 pmic node for smdk5250 board
Date: Sun, 16 Feb 2014 02:09:37 +0900 [thread overview]
Message-ID: <52FF9F51.7030009@samsung.com> (raw)
In-Reply-To: <1390043340-1184-1-git-send-email-thomas.ab@samsung.com>
On 01/18/14 20:09, Thomas Abraham wrote:
> From: Thomas Abraham<thomas.ab@samsung•com>
>
> Add Maxim 77686 PMIC node for Exynos5250 based SMDK5250 board.
>
> Signed-off-by: Thomas Abraham<thomas.ab@samsung•com>
> ---
> arch/arm/boot/dts/exynos5250-smdk5250.dts | 142 +++++++++++++++++++++++++++++
> 1 files changed, 142 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts
> index 3e69837..5c1b7d9 100644
> --- a/arch/arm/boot/dts/exynos5250-smdk5250.dts
> +++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts
> @@ -36,6 +36,148 @@
> compatible = "samsung,s524ad0xd1";
> reg =<0x50>;
> };
> +
> + max77686 at 09 {
> + compatible = "maxim,max77686";
> + reg =<0x09>;
> +
> + voltage-regulators {
> + ldo1_reg: LDO1 {
> + regulator-name = "P1.0V_LDO_OUT1";
> + regulator-min-microvolt =<1000000>;
> + regulator-max-microvolt =<1000000>;
> + regulator-always-on;
> + };
> +
> + ldo2_reg: LDO2 {
> + regulator-name = "P1.2V_LDO_OUT2";
> + regulator-min-microvolt =<1200000>;
> + regulator-max-microvolt =<1200000>;
> + regulator-always-on;
> + };
> +
> + ldo3_reg: LDO3 {
> + regulator-name = "P1.8V_LDO_OUT3";
> + regulator-min-microvolt =<1800000>;
> + regulator-max-microvolt =<1800000>;
> + regulator-always-on;
> + };
> +
> + ldo4_reg: LDO4 {
> + regulator-name = "P2.8V_LDO_OUT4";
> + regulator-min-microvolt =<2800000>;
> + regulator-max-microvolt =<2800000>;
> + };
> +
> + ldo5_reg: LDO5 {
> + regulator-name = "P1.8V_LDO_OUT5";
> + regulator-min-microvolt =<1800000>;
> + regulator-max-microvolt =<1800000>;
> + };
> +
> + ldo6_reg: LDO6 {
> + regulator-name = "P1.1V_LDO_OUT6";
> + regulator-min-microvolt =<1100000>;
> + regulator-max-microvolt =<1100000>;
> + regulator-always-on;
> + };
> +
> + ldo7_reg: LDO7 {
> + regulator-name = "P1.1V_LDO_OUT7";
> + regulator-min-microvolt =<1100000>;
> + regulator-max-microvolt =<1100000>;
> + regulator-always-on;
> + };
> +
> + ldo8_reg: LDO8 {
> + regulator-name = "P1.0V_LDO_OUT8";
> + regulator-min-microvolt =<1000000>;
> + regulator-max-microvolt =<1000000>;
> + };
> +
> + ldo10_reg: LDO10 {
> + regulator-name = "P1.8V_LDO_OUT10";
> + regulator-min-microvolt =<1800000>;
> + regulator-max-microvolt =<1800000>;
> + };
> +
> + ldo11_reg: LDO11 {
> + regulator-name = "P1.8V_LDO_OUT11";
> + regulator-min-microvolt =<1800000>;
> + regulator-max-microvolt =<1800000>;
> + };
> +
> + ldo12_reg: LDO12 {
> + regulator-name = "P3.0V_LDO_OUT12";
> + regulator-min-microvolt =<3000000>;
> + regulator-max-microvolt =<3000000>;
> + };
> +
> + ldo13_reg: LDO13 {
> + regulator-name = "P1.8V_LDO_OUT13";
> + regulator-min-microvolt =<1800000>;
> + regulator-max-microvolt =<1800000>;
> + };
> +
> + ldo14_reg: LDO14 {
> + regulator-name = "P1.8V_LDO_OUT14";
> + regulator-min-microvolt =<1800000>;
> + regulator-max-microvolt =<1800000>;
> + };
> +
> + ldo15_reg: LDO15 {
> + regulator-name = "P1.0V_LDO_OUT15";
> + regulator-min-microvolt =<1000000>;
> + regulator-max-microvolt =<1000000>;
> + };
> +
> + ldo16_reg: LDO16 {
> + regulator-name = "P1.8V_LDO_OUT16";
> + regulator-min-microvolt =<1800000>;
> + regulator-max-microvolt =<1800000>;
> + };
> +
> + buck1_reg: BUCK1 {
> + regulator-name = "vdd_mif";
> + regulator-min-microvolt =<950000>;
> + regulator-max-microvolt =<1300000>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + buck2_reg: BUCK2 {
> + regulator-name = "vdd_arm";
> + regulator-min-microvolt =<850000>;
> + regulator-max-microvolt =<1350000>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + buck3_reg: BUCK3 {
> + regulator-name = "vdd_int";
> + regulator-min-microvolt =<900000>;
> + regulator-max-microvolt =<1200000>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + buck4_reg: BUCK4 {
> + regulator-name = "vdd_g3d";
> + regulator-min-microvolt =<850000>;
> + regulator-max-microvolt =<1300000>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + buck5_reg: BUCK5 {
> + regulator-name = "P1.8V_BUCK_OUT5";
> + regulator-min-microvolt =<1800000>;
> + regulator-max-microvolt =<1800000>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> + };
> + };
> };
>
> vdd: fixed-regulator at 0 {
Applied, thanks.
- Kukjin
prev parent reply other threads:[~2014-02-15 17:09 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-01-18 11:09 [PATCH] ARM: dts: add max77686 pmic node for smdk5250 board Thomas Abraham
2014-02-15 17:09 ` Kukjin Kim [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=52FF9F51.7030009@samsung.com \
--to=kgene.kim@samsung$(echo .)com \
--cc=linux-arm-kernel@lists$(echo .)infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox