Subject: [PATCH 1/1] ARM: OMAP5: Fix reboot handling

From: [email-masked] (Lokesh Vutla)
Date: Mon, 17 Feb 2014 10:10:30 +0530

Hi Vaibhav,
On Monday 17 February 2014 04:45 AM, Vaibhav Bedia wrote:
> Use the correct register offset for issuing the
> reset command in OMAP5. Since dev_inst is set dynamically
> OMAP4 should not be affected by this change.
Thanks for the patch. This fixes reboot on OMAP5 and DRA7 also..:)

Tested-by: Lokesh Vutla <[email-masked]>

Thanks and regards,
Lokesh
> 
> Signed-off-by: Vaibhav Bedia <[email-masked]>
> ---
> Applies on top of v3.14-rc3
> 
>  arch/arm/mach-omap2/prminst44xx.c | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm/mach-omap2/prminst44xx.c b/arch/arm/mach-omap2/prminst44xx.c
> index 6334b96..280f3c5 100644
> --- a/arch/arm/mach-omap2/prminst44xx.c
> +++ b/arch/arm/mach-omap2/prminst44xx.c
> @@ -183,11 +183,11 @@ void omap4_prminst_global_warm_sw_reset(void)
>  					OMAP4_PRM_RSTCTRL_OFFSET);
>  	v |= OMAP4430_RST_GLOBAL_WARM_SW_MASK;
>  	omap4_prminst_write_inst_reg(v, OMAP4430_PRM_PARTITION,
> -				 OMAP4430_PRM_DEVICE_INST,
> +				 dev_inst,
>  				 OMAP4_PRM_RSTCTRL_OFFSET);
>  
>  	/* OCP barrier */
>  	v = omap4_prminst_read_inst_reg(OMAP4430_PRM_PARTITION,
> -				    OMAP4430_PRM_DEVICE_INST,
> +				    dev_inst,
>  				    OMAP4_PRM_RSTCTRL_OFFSET);
>  }
>