Subject: [PATCH v2 00/13] ARM: OMAP: SATA support for OMAP5 & DRA7

From: [email-masked] (Roger Quadros)
Date: Thu, 6 Mar 2014 16:27:56 +0200

On 03/06/2014 04:22 PM, Roger Quadros wrote:
> Hi,
> 
> This series adds SATA support for OMAP5 uevm and DRA7-evm boards.
> 
> - Cleans up the ti-pipe3 PHY driver
> - Adds SATA DPLL support to ti-pipe3 PHY driver
> - Adds SATA nodes to hwmod and SoC DT data
> 
> Patches are based on 3.14-rc4 with balbi/next, linux-phy/next and
> omap-for-v3.15/dt merged on top..
> 
> To test SATA you will also need [1].
> 
> [1] - http://article.gmane.org/gmane.comp.hardware.netbook.arm.sunxi/7285
> 
> Changelog:
> 
> v2
> - use 'depends on' instead of 'select' OCP2SCP bus driver.
> - Changed DT bindings for dra7-usb2 and am437-usb2 phy.
> 
> cheers,
> -roger
> 
> ---
> Balaji T K (2):
>   ARM: dts: omap5: add sata node
>   ARM: dts: dra7: add OCP2SCP3 and SATA nodes
> 
> Keshava Munegowda (1):
>   ARM: OMAP5: hwmod: Add ocp2scp3 and sata hwmods
> 
> Kishon Vijay Abraham I (1):
>   phy: rename struct omap_control_usb to struct omap_control_phy
> 
> Nikhil Devshatwar (1):
>   ARM: DRA7: hwmod: Add ocp2scp3 and sata hwmods
> 
> Roger Quadros (8):
>   phy: omap-control: Update DT binding information
>   phy: omap-control: update dra7 and am437 usb2 bindings
>   phy: ti-pipe3: cleanup clock handling
>   phy: ti-pipe3: Add SATA DPLL support
>   phy: ti-pipe3: Don't get 'wkupclk' and 'refclk' for SATA PHY
>   phy: ti-pipe3: streamline PHY operations
>   phy: ti-pipe3: Fix suspend/resume and module reload
>   phy: omap: Depend on OMAP_OCP2SCP bus driver
> 
>  Documentation/devicetree/bindings/phy/ti-phy.txt   |  40 ++-
>  Documentation/devicetree/bindings/usb/omap-usb.txt |  24 --
>  arch/arm/boot/dts/dra7.dtsi                        |  39 +++
>  arch/arm/boot/dts/omap5.dtsi                       |  47 ++-
>  arch/arm/mach-omap2/omap_hwmod_54xx_data.c         |  73 +++++
>  arch/arm/mach-omap2/omap_hwmod_7xx_data.c          |  31 +-
>  drivers/phy/Kconfig                                |  16 +-
>  drivers/phy/Makefile                               |   1 +
>  drivers/phy/phy-omap-control.c                     | 320 +++++++++++++++++++++
>  drivers/phy/phy-omap-usb2.c                        |   8 +-
>  drivers/phy/phy-ti-pipe3.c                         | 269 ++++++++++-------
>  drivers/usb/musb/omap2430.c                        |   2 +-
>  drivers/usb/phy/Kconfig                            |  10 -
>  drivers/usb/phy/Makefile                           |   1 -
>  drivers/usb/phy/phy-omap-control.c                 | 319 --------------------
>  include/linux/phy/omap_control_phy.h               |  89 ++++++
>  include/linux/usb/omap_control_usb.h               |  89 ------
>  17 files changed, 815 insertions(+), 563 deletions(-)
>  create mode 100644 drivers/phy/phy-omap-control.c
>  delete mode 100644 drivers/usb/phy/phy-omap-control.c
>  create mode 100644 include/linux/phy/omap_control_phy.h
>  delete mode 100644 include/linux/usb/omap_control_usb.h
> 
oops. forgot to add -M :(.

I'll resend just the 1st patch since it contains the file rename.
updated diffstat is below.

 Documentation/devicetree/bindings/phy/ti-phy.txt   |  40 ++-
 Documentation/devicetree/bindings/usb/omap-usb.txt |  24 --
 arch/arm/boot/dts/dra7.dtsi                        |  39 +++
 arch/arm/boot/dts/omap5.dtsi                       |  47 +++-
 arch/arm/mach-omap2/omap_hwmod_54xx_data.c         |  73 ++++++
 arch/arm/mach-omap2/omap_hwmod_7xx_data.c          |  31 ++-
 drivers/phy/Kconfig                                |  16 +-
 drivers/phy/Makefile                               |   1 +
 drivers/{usb => }/phy/phy-omap-control.c           | 169 ++++++-------
 drivers/phy/phy-omap-usb2.c                        |   8 +-
 drivers/phy/phy-ti-pipe3.c                         | 269 +++++++++++++--------
 drivers/usb/musb/omap2430.c                        |   2 +-
 drivers/usb/phy/Kconfig                            |  10 -
 drivers/usb/phy/Makefile                           |   1 -
 .../omap_control_usb.h => phy/omap_control_phy.h}  |  36 +--
 15 files changed, 509 insertions(+), 257 deletions(-)
 rename drivers/{usb => }/phy/phy-omap-control.c (53%)
 rename include/linux/{usb/omap_control_usb.h => phy/omap_control_phy.h} (68%)

cheers,
-roger