Subject: [PATCH 7/8] ARM: dts: dra7: Add USB related nodes

From: [email-masked] (Kishon Vijay Abraham I)
Date: Fri, 14 Mar 2014 20:24:33 +0530

On Friday 14 March 2014 05:41 PM, Roger Quadros wrote:
> On 03/14/2014 12:38 PM, Kishon Vijay Abraham I wrote:
>> Hi Roger,
>>
>> On Friday 07 March 2014 06:39 PM, Roger Quadros wrote:
>>> Add nodes for the Super Speed USB controllers, omap-control-usb,
>>> USB2 PHY and USB3 PHY devices.
>>>
>>> Remove ocp2scp1 address space from hwmod data as it is
>>> now provided via device tree.
>>>
>>> Signed-off-by: Roger Quadros <[email-masked]>
>>> ---
>>>    arch/arm/boot/dts/dra7.dtsi               | 110 ++++++++++++++++++++++++++++++
>>>    arch/arm/mach-omap2/omap_hwmod_7xx_data.c |  10 ---
>>>    2 files changed, 110 insertions(+), 10 deletions(-)
>>>
>>> diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
>>> index 597979b..1e73900 100644
>>> --- a/arch/arm/boot/dts/dra7.dtsi
>>> +++ b/arch/arm/boot/dts/dra7.dtsi
>>> @@ -811,6 +811,116 @@
>>>                clocks = <&sata_ref_clk>;
>>>                ti,hwmods = "sata";
>>>            };
>>> +
>>> +        omap_control_usb2phy1: control-phy at 4a002300 {
>>> +            compatible = "ti,control-phy-usb2";
>>> +            reg = <0x4a002300 0x4>;
>>> +            reg-names = "power";
>>> +        };
>>> +
>>> +        omap_control_usb3phy1: control-phy at 4a002370 {
>>> +            compatible = "ti,control-phy-pipe3";
>>> +            reg = <0x4a002370 0x4>;
>>> +            reg-names = "power";
>>> +        };
>>> +
>>> +        omap_control_usb2phy2: control-phy at 0x4a002e74 {
>>> +            compatible = "ti,control-phy-usb2-dra7";
>>> +            reg = <0x4a002e74 0x4>;
>>> +            reg-names = "power";
>>> +        };
>>> +
>>> +        /* OCP2SCP1 */
>>> +        ocp2scp at 4a080000 {
>>> +            compatible = "ti,omap-ocp2scp";
>>> +            #address-cells = <1>;
>>> +            #size-cells = <1>;
>>> +            ranges;
>>> +            reg = <0x4a080000 0x20>;
>>> +            ti,hwmods = "ocp2scp1";
>>> +
>>> +            usb2_phy1: phy at 4a084000 {
>>> +                compatible = "ti,omap-usb2";
>>> +                reg = <0x4a084000 0x400>;
>>> +                ctrl-module = <&omap_control_usb2phy1>;
>>> +                clocks = <&usb_phy1_always_on_clk32k>,
>>> +                     <&usb_otg_ss1_refclk960m>;
>>> +                clock-names =    "wkupclk",
>>> +                        "refclk";
>>> +                #phy-cells = <0>;
>>> +            };
>>> +
>>> +            usb2_phy2: phy at 4a085000 {
>>> +                compatible = "ti,omap-usb2";
>>> +                reg = <0x4a085000 0x400>;
>>> +                ctrl-module = <&omap_control_usb2phy2>;
>>> +                clocks = <&usb_phy2_always_on_clk32k>,
>>> +                     <&usb_otg_ss2_refclk960m>;
>>> +                clock-names =    "wkupclk",
>>> +                        "refclk";
>>> +                #phy-cells = <0>;
>>> +            };
>>> +
>>> +            usb3_phy1: phy at 4a084400 {
>>> +                compatible = "ti,omap-usb3";
>>> +                reg = <0x4a084400 0x80>,
>>> +                      <0x4a084800 0x64>,
>>> +                      <0x4a084c00 0x40>;
>>> +                reg-names = "phy_rx", "phy_tx", "pll_ctrl";
>>> +                ctrl-module = <&omap_control_usb3phy1>;
>>> +                clocks = <&usb_phy3_always_on_clk32k>,
>>> +                     <&sys_clkin1>,
>>> +                     <&usb_otg_ss1_refclk960m>,
>>> +                     <&dpll_core_h13x2_ck>;
>>> +                clock-names =    "wkupclk",
>>> +                        "sysclk",
>>> +                        "refclk",
>>> +                        "optclk";
>>
>> Do we use this 'optclk' in driver?
>
> No we don't. Still the device seems to work without it.
> This is supposed to be USB_LFPS_TX_GFCLK or USB3PHY_REF_CLK.

I think it should be enabled. Did you check the status of this clock in 
CM_L3INIT_CLKSTCTRL? Moreover USB_LFPS_TX_GFCLK is an interface clock, 
so IIUC setting the module mode will enable it.

Btw how did you tell dpll_core_h13x2_ck enables USB_LFPS_TX_GFCLK?

Cheers
Kishon