Subject: [PATCH 1/4] pwm: Add Allwinner SoC support

From: [email-masked] (Emilio López)
Date: Mon, 31 Mar 2014 09:53:16 -0300

Hi,

I had a quick look and spotted a couple of things here, see inline.

El 31/03/14 09:07, Alexandre Belloni escribi?:
> This adds a generic PWM framework driver for the PWM controller
> found on Allwinner SoCs.
>
> Signed-off-by: Alexandre Belloni <[email-masked]>
> ---
>   drivers/pwm/Kconfig     |   9 ++
>   drivers/pwm/Makefile    |   1 +
>   drivers/pwm/pwm-sunxi.c | 325 ++++++++++++++++++++++++++++++++++++++++++++++++
>   3 files changed, 335 insertions(+)
>   create mode 100644 drivers/pwm/pwm-sunxi.c
>
> diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig
> index 22f2f2857b82..f7381def0fd2 100644
> --- a/drivers/pwm/Kconfig
> +++ b/drivers/pwm/Kconfig
> @@ -187,6 +187,15 @@ config PWM_SPEAR
>   	  To compile this driver as a module, choose M here: the module
>   	  will be called pwm-spear.
>
> +config PWM_SUNXI
> +	tristate "Allwinner PWM support"
> +	depends on ARCH_SUNXI
> +	help
> +	  Generic PWM framework driver for Allwinner SoCs.
> +
> +	  To compile this driver as a module, choose M here: the module
> +	  will be called pwm-sunxi.
> +
>   config PWM_TEGRA
>   	tristate "NVIDIA Tegra PWM support"
>   	depends on ARCH_TEGRA
> diff --git a/drivers/pwm/Makefile b/drivers/pwm/Makefile
> index d8906ec69976..e110259b6c03 100644
> --- a/drivers/pwm/Makefile
> +++ b/drivers/pwm/Makefile
> @@ -16,6 +16,7 @@ obj-$(CONFIG_PWM_PXA)		+= pwm-pxa.o
>   obj-$(CONFIG_PWM_RENESAS_TPU)	+= pwm-renesas-tpu.o
>   obj-$(CONFIG_PWM_SAMSUNG)	+= pwm-samsung.o
>   obj-$(CONFIG_PWM_SPEAR)		+= pwm-spear.o
> +obj-$(CONFIG_PWM_SUNXI)		+= pwm-sunxi.o
>   obj-$(CONFIG_PWM_TEGRA)		+= pwm-tegra.o
>   obj-$(CONFIG_PWM_TIECAP)	+= pwm-tiecap.o
>   obj-$(CONFIG_PWM_TIEHRPWM)	+= pwm-tiehrpwm.o
> diff --git a/drivers/pwm/pwm-sunxi.c b/drivers/pwm/pwm-sunxi.c
> new file mode 100644
> index 000000000000..be39abee0a24
> --- /dev/null
> +++ b/drivers/pwm/pwm-sunxi.c
> @@ -0,0 +1,325 @@
> +/*
> + * Driver for Allwinner Pulse Width Modulation Controller
> + *
> + * Copyright (C) 2014 Alexandre Belloni <[email-masked]>
> + *
> + * Licensed under GPLv2.
> + */
> +
> +#include <linux/bitops.h>
> +#include <linux/clk.h>
> +#include <linux/err.h>
> +#include <linux/io.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_device.h>
> +#include <linux/platform_device.h>
> +#include <linux/pwm.h>
> +#include <linux/slab.h>
> +
> +#define PWM_CTRL_REG		0x0
> +
> +#define PWM_CH_PRD_BASE		0x4
> +#define PWM_CH_PRD_OFF		0x4
> +#define PWM_CH_PRD(x)		(PWM_CH_PRD_BASE + PWM_CH_PRD_OFF * x)
> +
> +#define	PWMCH_OFFSET		15
> +#define PWM_PRESCAL_MASK	(BIT(0)|BIT(1)|BIT(2)|BIT(3))

0xF looks better in my opinion

> +#define PWM_PRESCAL_OFF		0
> +#define PWM_EN			BIT(4)
> +#define PWM_ACT_STATE		BIT(5)
> +#define PWM_CLK_GATING		BIT(6)
> +#define PWM_MODE		BIT(7)
> +#define PWM_PULSE		BIT(8)
> +#define PWM_BYPASS		BIT(9)
> +
> +#define PWM_RDY_BASE		28
> +#define PWM_RDY_OFF		1
> +#define PWM_RDY(x)		BIT(PWM_RDY_BASE + PWM_RDY_OFF * x)
> +
> +#define PWM_PRD_ACT_MASK	0xFF
> +#define PWM_PRD(x)		(x << 16)
> +#define PWM_PRD_MASK		0xFF
> +
> +#define	BIT_CH(bit, chan)	(bit << (chan * PWMCH_OFFSET))
> +
> +u32 prescal_table[] = { 120, 180, 240, 360, 480, 0, 0, 0,
> +			12000, 24000, 36000, 48000, 72000,
> +			0, 0, 1 };
> +
> +struct sunxi_pwm_data {
> +	bool has_rdy;
> +};
> +
> +struct sunxi_pwm_chip {
> +	struct pwm_chip chip;
> +	struct clk *clk;
> +	void __iomem *base;
> +	const struct sunxi_pwm_data *data;
> +};
> +
> +#define to_sunxi_pwm_chip(chip) container_of(chip, struct sunxi_pwm_chip, chip)
> +
> +static inline u32 sunxi_pwm_readl(struct sunxi_pwm_chip *chip,
> +				  unsigned long offset)
> +{
> +	return readl_relaxed(chip->base + offset);
> +}
> +
> +static inline void sunxi_pwm_writel(struct sunxi_pwm_chip *chip,
> +				    unsigned long offset, unsigned long val)
> +{
> +	writel_relaxed(val, chip->base + offset);
> +}
> +
> +static int sunxi_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
> +			    int duty_ns, int period_ns)
> +{
> +	struct sunxi_pwm_chip *sunxi_pwm = to_sunxi_pwm_chip(chip);
> +	u32 clk_rate, prd, dty;
> +	u64 div;
> +	u32 val, clk_gate;
> +	int i, ret;
> +
> +	clk_rate = clk_get_rate(sunxi_pwm->clk);
> +
> +
> +	/* First, test without any divider */
> +	i = PWM_PRESCAL_MASK;
> +	div = clk_rate * period_ns;
> +	do_div(div, 1000000000);
> +	if (div > PWM_PRD_MASK) {
> +		/* Then go up from the first divider */
> +		for (i = 0; i < PWM_PRESCAL_MASK; i++) {
> +			if (!prescal_table[i])
> +				continue;
> +			div = clk_rate / prescal_table[i];
> +			div = div * period_ns;
> +			do_div(div, 1000000000);
> +			if (div <= PWM_PRD_MASK)
> +				break;
> +		}
> +	}
> +
> +	if (div > PWM_PRD_MASK) {
> +		dev_err(chip->dev, "prescaler exceeds the maximum value\n");
> +		return -EINVAL;
> +	}
> +
> +	prd = div;
> +	div *= duty_ns;
> +	do_div(div, period_ns);
> +	dty = div;
> +
> +	ret = clk_enable(sunxi_pwm->clk);
> +	if (ret) {
> +		dev_err(chip->dev, "failed to enable PWM clock\n");
> +		return ret;
> +	}
> +
> +	val = sunxi_pwm_readl(sunxi_pwm, PWM_CTRL_REG);
> +
> +	if (sunxi_pwm->data->has_rdy && (val & PWM_RDY(pwm->hwpwm)))
> +		return -EBUSY;
> +
> +	clk_gate = val & BIT_CH(PWM_CLK_GATING, pwm->hwpwm);
> +	val &= ~BIT_CH(PWM_CLK_GATING, pwm->hwpwm);
> +	sunxi_pwm_writel(sunxi_pwm, PWM_CTRL_REG, val);
> +
> +	val = sunxi_pwm_readl(sunxi_pwm, PWM_CTRL_REG);
> +	val &= ~BIT_CH(PWM_PRESCAL_MASK, pwm->hwpwm);
> +	val |= i;
> +	sunxi_pwm_writel(sunxi_pwm, PWM_CTRL_REG, val);
> +
> +	sunxi_pwm_writel(sunxi_pwm, PWM_CH_PRD(pwm->hwpwm), dty | PWM_PRD(prd));
> +
> +	val = sunxi_pwm_readl(sunxi_pwm, PWM_CTRL_REG);
> +	val |= clk_gate;
> +	sunxi_pwm_writel(sunxi_pwm, PWM_CTRL_REG, val);
> +
> +	clk_disable(sunxi_pwm->clk);
> +	return ret;
> +}
> +
> +static int sunxi_pwm_set_polarity(struct pwm_chip *chip, struct pwm_device *pwm,
> +				  enum pwm_polarity polarity)
> +{
> +	struct sunxi_pwm_chip *sunxi_pwm = to_sunxi_pwm_chip(chip);
> +	u32 val;
> +	int ret;
> +
> +	val = sunxi_pwm_readl(sunxi_pwm, PWM_CTRL_REG);
> +
> +	if (polarity != PWM_POLARITY_NORMAL)
> +		val &= ~BIT_CH(PWM_ACT_STATE, pwm->hwpwm);
> +	else
> +		val |= BIT_CH(PWM_ACT_STATE, pwm->hwpwm);
> +
> +	ret = clk_enable(sunxi_pwm->clk);
> +	if (ret) {
> +		dev_err(chip->dev, "failed to enable PWM clock\n");
> +		return ret;
> +	}
> +
> +	sunxi_pwm_writel(sunxi_pwm, PWM_CTRL_REG, val);
> +
> +	clk_disable(sunxi_pwm->clk);
> +
> +	return 0;
> +}
> +
> +static int sunxi_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
> +{
> +	struct sunxi_pwm_chip *sunxi_pwm = to_sunxi_pwm_chip(chip);
> +	u32 val;
> +	int ret;
> +
> +	ret = clk_enable(sunxi_pwm->clk);
> +	if (ret) {
> +		dev_err(chip->dev, "failed to enable PWM clock\n");
> +		return ret;
> +	}
> +
> +	val = sunxi_pwm_readl(sunxi_pwm, PWM_CTRL_REG);
> +	val |= BIT_CH(PWM_EN, pwm->hwpwm);
> +	val |= BIT_CH(PWM_CLK_GATING, pwm->hwpwm);
> +	sunxi_pwm_writel(sunxi_pwm, PWM_CTRL_REG, val);
> +
> +	return 0;
> +}
> +
> +static void sunxi_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
> +{
> +	struct sunxi_pwm_chip *sunxi_pwm = to_sunxi_pwm_chip(chip);
> +	u32 val;
> +
> +	val = sunxi_pwm_readl(sunxi_pwm, PWM_CTRL_REG);
> +	val &= ~BIT_CH(PWM_EN, pwm->hwpwm);
> +	val &= ~BIT_CH(PWM_CLK_GATING, pwm->hwpwm);
> +	sunxi_pwm_writel(sunxi_pwm, PWM_CTRL_REG, val);
> +
> +	clk_disable(sunxi_pwm->clk);
> +}
> +
> +static const struct pwm_ops sunxi_pwm_ops = {
> +	.config = sunxi_pwm_config,
> +	.set_polarity = sunxi_pwm_set_polarity,
> +	.enable = sunxi_pwm_enable,
> +	.disable = sunxi_pwm_disable,
> +	.owner = THIS_MODULE,
> +};
> +
> +static const struct sunxi_pwm_data sunxi_pwm_data_v1 = {
> +	.has_rdy = false,
> +};
> +
> +static const struct sunxi_pwm_data sunxi_pwm_data_v2 = {
> +	.has_rdy = true,
> +};

Is there any special reason why you used v1 and v2?

> +static const struct of_device_id sunxi_pwm_dt_ids[] = {
> +	{
> +		.compatible = "allwinner,sun4i-pwm",
> +		.data = &sunxi_pwm_data_v1,
> +	}, {
> +		.compatible = "allwinner,sun7i-pwm",
> +		.data = &sunxi_pwm_data_v2,

Please adjust your compatibles to also indicate SoC, as on all of the 
other devices:

allwinner,sun4i-a10-pwm
allwinner,sun7i-a20-pwm

> +	}, {
> +		/* sentinel */
> +	},
> +};
> +MODULE_DEVICE_TABLE(of, sunxi_pwm_dt_ids);
> +
> +static int sunxi_pwm_probe(struct platform_device *pdev)
> +{
> +	struct sunxi_pwm_chip *sunxi_pwm;
> +	struct resource *res;
> +	int ret;
> +
> +	const struct of_device_id *match;
> +
> +	match = of_match_device(sunxi_pwm_dt_ids, &pdev->dev);
> +	if (!match || !match->data)
> +		return -ENODEV;
> +
> +	sunxi_pwm = devm_kzalloc(&pdev->dev, sizeof(*sunxi_pwm), GFP_KERNEL);
> +	if (!sunxi_pwm)
> +		return -ENOMEM;
> +
> +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +	sunxi_pwm->base = devm_ioremap_resource(&pdev->dev, res);
> +	if (IS_ERR(sunxi_pwm->base))
> +		return PTR_ERR(sunxi_pwm->base);
> +
> +	sunxi_pwm->clk = devm_clk_get(&pdev->dev, NULL);
> +	if (IS_ERR(sunxi_pwm->clk))
> +		return PTR_ERR(sunxi_pwm->clk);
> +
> +	ret = clk_prepare(sunxi_pwm->clk);
> +	if (ret) {
> +		dev_err(&pdev->dev, "failed to prepare PWM clock\n");
> +		return ret;
> +	}
> +
> +	sunxi_pwm->chip.dev = &pdev->dev;
> +	sunxi_pwm->chip.ops = &sunxi_pwm_ops;
> +
> +	if (pdev->dev.of_node) {
> +		sunxi_pwm->chip.of_xlate = of_pwm_xlate_with_flags;
> +		sunxi_pwm->chip.of_pwm_n_cells = 3;
> +	}
> +
> +	sunxi_pwm->chip.base = -1;
> +	sunxi_pwm->chip.npwm = 2;
> +	sunxi_pwm->data = match->data;
> +
> +	/* By default, the polarity is inversed, set it to normal */

This comment seems to be misplaced

> +	ret = clk_enable(sunxi_pwm->clk);
> +	if (ret) {
> +		dev_err(&pdev->dev, "failed to enable PWM clock\n");
> +		goto unprepare_clk;
> +	}
> +	sunxi_pwm_writel(sunxi_pwm, PWM_CTRL_REG,
> +			 BIT_CH(PWM_ACT_STATE, 0) |
> +			 BIT_CH(PWM_ACT_STATE, 1));
> +	clk_disable(sunxi_pwm->clk);
> +
> +	ret = pwmchip_add(&sunxi_pwm->chip);
> +	if (ret < 0) {
> +		dev_err(&pdev->dev, "failed to add PWM chip %d\n", ret);
> +		goto unprepare_clk;
> +	}
> +
> +	platform_set_drvdata(pdev, sunxi_pwm);
> +
> +
> +	return ret;
> +
> +unprepare_clk:
> +	clk_unprepare(sunxi_pwm->clk);
> +	return ret;
> +}
> +
> +static int sunxi_pwm_remove(struct platform_device *pdev)
> +{
> +	struct sunxi_pwm_chip *sunxi_pwm = platform_get_drvdata(pdev);
> +
> +	clk_unprepare(sunxi_pwm->clk);
> +
> +	return pwmchip_remove(&sunxi_pwm->chip);
> +}
> +
> +static struct platform_driver sunxi_pwm_driver = {
> +	.driver = {
> +		.name = "sunxi-pwm",
> +		.of_match_table = of_match_ptr(sunxi_pwm_dt_ids),
> +	},
> +	.probe = sunxi_pwm_probe,
> +	.remove = sunxi_pwm_remove,
> +};
> +module_platform_driver(sunxi_pwm_driver);
> +
> +MODULE_ALIAS("platform:sunxi-pwm");
> +MODULE_AUTHOR("alexandre Belloni <[email-masked]>");

You may want to make that a capital A.

> +MODULE_DESCRIPTION("Allwinner PWM driver");
> +MODULE_LICENSE("GPL v2");
>

Thanks for working on this!

Emilio