Subject: [PATCH v7 1/2] dma: Add Xilinx Video DMA DT Binding Documentation

From: [email-masked] (Michal Simek)
Date: Wed, 02 Apr 2014 13:39:51 +0200

Hi,

On 03/28/2014 01:03 PM, Srikanth Thokala wrote:
> Device-tree binding documentation of Xilinx Video DMA Engine
> 
> Signed-off-by: Srikanth Thokala <[email-masked]>
> ---
> Changes in v7:
> None
> 
> Changes in v6:
> None
> 
> Changes in v5:
> None
> 
> Changes in v4:
> None
> 
> Changes in v3:
> None
> 
> Changes in v2:
> - Removed device-id DT property, as suggested by Arnd Bergmann
> - Properly documented DT bindings as suggested by Arnd Bergmann
> ---
>  .../devicetree/bindings/dma/xilinx/xilinx_vdma.txt |   75 ++++++++++++++++++++
>  1 file changed, 75 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/dma/xilinx/xilinx_vdma.txt
> 
> diff --git a/Documentation/devicetree/bindings/dma/xilinx/xilinx_vdma.txt b/Documentation/devicetree/bindings/dma/xilinx/xilinx_vdma.txt
> new file mode 100644
> index 0000000..ab8be1a
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/dma/xilinx/xilinx_vdma.txt
> @@ -0,0 +1,75 @@
> +Xilinx AXI VDMA engine, it does transfers between memory and video devices.
> +It can be configured to have one channel or two channels. If configured
> +as two channels, one is to transmit to the video device and another is
> +to receive from the video device.
> +
> +Required properties:
> +- compatible: Should be "xlnx,axi-vdma-1.00.a"
> +- #dma-cells: Should be <1>, see "dmas" property below
> +- reg: Should contain VDMA registers location and length.
> +- xlnx,num-fstores: Should be the number of framebuffers as configured in h/w.
> +- dma-channel child node: Should have atleast one channel and can have upto
> +	two channels per device. This node specifies the properties of each
> +	DMA channel (see child node properties below).
> +
> +Optional properties:
> +- xlnx,include-sg: Tells whether configured for Scatter-mode in
> +	the hardware.
> +- xlnx,flush-fsync: Tells whether which channel to Flush on Frame sync.
> +	It takes following values:
> +	{1}, flush both channels
> +	{2}, flush mm2s channel
> +	{3}, flush s2mm channel
> +
> +Required child node properties:
> +- compatible: It should be either "xlnx,axi-vdma-mm2s-channel" or
> +	"xlnx,axi-vdma-s2mm-channel".
> +- interrupts: Should contain per channel VDMA interrupts.
> +- xlnx,data-width: Should contain the stream data width, take values
> +	{32,64...1024}.
> +
> +Option child node properties:
> +- xlnx,include-dre: Tells whether hardware is configured for Data
> +	Realignment Engine.
> +- xlnx,genlock-mode: Tells whether Genlock synchronization is
> +	enabled/disabled in hardware.
> +
> +Example:
> +++++++++
> +
> +axi_vdma_0: axivdma at 40030000 {
> +	compatible = "xlnx,axi-vdma-1.00.a";
> +	#dma_cells = <1>;
> +	reg = < 0x40030000 0x10000 >;
> +	xlnx,num-fstores = <0x8>;
> +	xlnx,flush-fsync = <0x1>;
> +	dma-channel at 40030000 {
> +		compatible = "xlnx,axi-vdma-mm2s-channel";
> +		interrupts = < 0 54 4 >;
> +		xlnx,datawidth = <0x40>;
> +	} ;
> +	dma-channel at 40030030 {
> +		compatible = "xlnx,axi-vdma-s2mm-channel";
> +		interrupts = < 0 53 4 >;
> +		xlnx,datawidth = <0x40>;
> +	} ;
> +} ;
> +
> +
> +* DMA client
> +
> +Required properties:
> +- dmas: a list of <[Video DMA device phandle] [Channel ID]> pairs,
> +	where Channel ID is '0' for write/tx and '1' for read/rx
> +	channel.
> +- dma-names: a list of DMA channel names, one per "dmas" entry
> +
> +Example:
> +++++++++
> +
> +vdmatest_0: vdmatest at 0 {
> +	compatible ="xlnx,axi-vdma-test-1.00.a";
> +	dmas = <&axi_vdma_0 0
> +		&axi_vdma_0 1>;
> +	dma-names = "vdma0", "vdma1";
> +} ;
> 

Rob, Mark: Any comment regarding binding?

Thanks,
Michal

-- 
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel - Microblaze cpu - http://www.monstr.eu/fdt/
Maintainer of Linux kernel - Xilinx Zynq ARM architecture
Microblaze U-BOOT custodian and responsible for u-boot arm zynq platform

-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 263 bytes
Desc: OpenPGP digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20140402/c0b382d4/attachment.sig>